Availability
Nothing fits an original like the original, so when you need the right pieces to maintain your Stromberg, look for genuine Stromberg restoration parts. Their brass floats are precision-made on the original Stromberg vendor tooling for a no-hassle rebuild. The floats are supplied with a new float pin. Parts are designed and manufactured to the best available quality at a great value. Make sure that you have the genuine Stromberg stamp on your service parts for a perfect fit every time.
( 1 )
$25.95
Nothing fits an original like the original, so when you need the right pieces to maintain your Stromberg, look for genuine Stromberg service parts. Their emulsion tubes are precision-made from brass for a no-hassle rebuild. Parts are designed and manufactured to the best available quality at a great value. Make sure that you have the genuine Stromberg stamp on your service parts for a perfect fit every time.
Not Yet Reviewed
$26.50
Your genuine Stromberg carburetors come with size 0.045 jets, but if you want to change the jet size, make sure that you get the genuine article for your carburetor. Stromberg main jets are the real deal. Crafted from brass, these beauties are available in all jetting sizes to match your application. Look for the genuine Stromberg "S" stamped on every part and you'll know that you have the right part and the best quality for your Stromberg 97, 40, 48, and 81 carburetors.
( 10 )
$11.50
Nothing fits an original like the original, so when you need the right pieces to maintain your Stromberg, look for genuine Stromberg service parts. Their brass idle adjusting screws and springs are given a gold iridited finish and precision-made for a no-hassle rebuild. The float is supplied with new float pin. Parts are designed and manufactured to the best available quality at a great value. Make sure that you have the genuine Stromberg stamp on your service parts for a perfect fit every time.
( 1 )
$14.75
Easy and accurate float adjustments are yours with these Stromberg fuel bowl sight plugs. They eliminate the problem of spilled fuel when adjusting float levels.
( 1 )
$22.50
These Stromberg throttle plate screw kits are designed to attach your throttle plates to the throttle shaft of your Stromberg carburetor. They include all necessary fasteners to complete the installation.
( 2 )
$7.50
Are you looking for traditional hot rod carburetion? Genuine Stromberg 97 carburetors are your answer to awesome looking, trouble-free carburetion. These carburetors are built to original blueprint specifications with key improvements. Why not top your street rod engine with two or three? These Genuine Stromberg 97 carburetors come in two and three packs with guaranteed good chromate color tone match and sequential ID numbers. And for those of you with "push" style throttle linkage, the LZ model has the lever on the throttle bracket pointing down--great for early Lincolns or your '49 Mercury. No matter which one you choose, you'll find no seconds, no mystery parts from previous rebuilds, no oversize screw threads, no warping, no leaks, no rust, and no problems. Here's how these beautiful, top-running Stromberg 97 carburetors stack up: * New, improved, early-style cast iron base with stock-size throttle shaft * Big 97 logo, Type 1 bowl casting, pressure-cast in new dies, and CNC-machined * New emulsion tubes * Stock Stromberg jetting--0.045 in. main jets and a Number 65 power valve * New air horn casting with extra meat around the float bowl lid * New brass float, made on the original Stromberg dies * Newly developed, no-stick S-jet inlet valve * Modern, high-tech, reinforced cellulose/nitrile gaskets * Stainless steel linkage instead of plated mild steel throughout * Investment cast stainless steel throttle and accelerator pump levers * Correct pale chromate color with iridescent highlights * Correct black Parkerized/lacquered bases
( 1 )
$525.00
Stromberg 81 carburetors are the perfect partner for your early Ford 4-banger or V8-60 engine. Here are the product highlights: * Super-accurate pressure die-castings from new dies, CNC-machined for a blue-print parts fit * New base casting with correct 1.0625 in. throttle plates. Parkerized and black lacquered just like they used to be * Two slip-in aluminum inserts replicate the original 0.81 in. venturi; correct booster signal with minimum turbulence * O-ring sealed sleeve pressed into the accelerator pump well, for the correct 81 pump * Reinforced air horn casting with extra material around the float bowl lid to eliminate warping and leaks * Tested and jetted correctly for this new model: 0.036 in. main jets and a No. 71 power valve * 116 cfm airflow capacity (independently verified) measured at 1.5 in. Hg (same as they measure 4-bbl carbs) * New brass float, made in USA on original Stromberg dies * Specially developed no-stick S-Jet inlet valve * New, correct-size 81 base gasket * Stainless steel linkage throughout. Stainless springs, accelerator pump rod, throttle linkage, choke plate, lever and more * Beautiful investment cast stainless steel throttle and accelerator pump levers * Correct pale chromate zinc treatment using the original Ford Service Bulletin process * Original-style riveted throttle and choke shafts * Extensive dyno and road tests—and great feedback! * Note: Original hand throttle parts are not included * Remember, like any carburetor, the new Stromberg 81 needs proper installation and tuning for optimum performance. Every 81 comes with full installation instructions
( 1 )
$555.00
Stromberg BIG97 carburetors feature 55 percent increased airflow to put out a whopping 250 cfm! They have the same standard 97 outside shape, but use enlarged 1.175 in. venturi with a super-efficient 20 degree entry angle. The accelerator pump discharge jets are smaller, and flared exit cones build power by slowing down the mixture to reduce turbulence into the manifold plenum. The result is 250 cfm. Stromberg BIG97 Tri-Power carburetors feature: * Signature 97 outside shape and styling * Cast iron base * Reinforced airhorn * Early plenum effect: allows all cylinders to draw from both barrels, giving you dual-plane drivability with a single-plane style top-end horsepower * New power valve circuits improve fuel conditioning: feeds top-end enrichment directly into the emulsion tubes * Ported distributor vacuum: switch in the brass plug (included) and connect your distributor to improve combustion efficiency in cruising mode; you'll run smoother and cooler, with more torque and better fuel mileage * Big S-jet twin-ball inlet valve: accepts 5/16 in. hard line and standard Stromberg fuel fittings * Four finishes available: original equipment style, chrome, chrome/black, or barn find (patina)
( 2 )
$525.00
—
$1,560.00
The Stromberg 97 carburetor base plates feature a new 97 base (throttle body) with specially-designed brass fittings to help provide ported vacuum advance for your distributor. These carb base plates come complete with throttle shaft, bushes and plate, new kicker and choke lever, idle mixture screws, and springs and gaskets. Genuine Stromberg—the choice for generations of hot rodders!
( 4 )
$170.00
Nothing fits an original like the original, so when you need the right pieces to maintain your Stromberg, look for genuine Stromberg service parts. Their accelerator pump kits are made to fit for a no-hassle repair. These kits include springs, retainers, washers, felt gaskets, and cotter pins. They also have a kit for the Stromberg 81 with a correct 10-finger brass spring washer beneath a leather seal. Parts are designed and manufactured to the best available quality at a great value. Make sure that you have the genuine Stromberg stamp on your service parts for a perfect fit every time.
Not Yet Reviewed
$23.25
Nothing fits an original like the original, so when you need the right pieces to maintain your Stromberg, look for genuine Stromberg restoration parts. Their accelerator pump discharge jets plus collars are precision-made from brass for a no-hassle rebuild. Parts are designed and manufactured to the best available quality at a great value. Make sure that you have the genuine Stromberg stamp on your service parts for a perfect fit every time.
( 3 )
$22.50
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
