Availability
Stromberg carburetor rebuild kits are the real deal. Designed and manufactured to the highest quality, these premium service kits offer great value and authentic service parts for your Stromberg carburetor rebuild. These carburetor kits are available for your Stromberg 97, 48, 40, and 81 to keep them operating at peak performance. Kits include: * Full gasket kit * No-stick S-jet inlet valve * Accelerator pump check valve * 2 idle mixture screws and springs * Full accelerator pump kit * Installation sheet * Float gauge
( 16 )
$52.95
Connect your '97s for performance and appearance with Stromberg TwoStep linkage kits. Their 2x2 throttle linkages couple both your carburetors with clean, traditional looks and maximum leverage! Stromberg TwoStep direct linkage utilizes long die-cast zinc SuperLink lever arms with swivels while all other parts are crafted from long-lasting, strong stainless steel. These intake specific kits are delivered preassembled and install in just two simple steps. You don't need extended throttle shafts and two new "snapback" throttle return springs are included. Complete your Stromberg 97 set-up with a clean, nostalgic look that's competitively priced--TwoStep 2x2 throttle linkages.
( 9 )
$52.50
These Stromberg full gasket kits contain all of the replacement gaskets that you need for your Stromberg carburetor. They're made of high-quality materials to keep your carburetor sealed properly and in peak working condition.
( 5 )
$52.95
Stromberg throttle cable brackets position the cable for optimum, bind-free 'pulls' on their TwoStep linkages. These stainless steel brackets are compatible with most readily available hot rod cable throttle kits—and include two Stromberg carburetor-to-manifold gaskets. They feature a fixing hole for the small extension bracket supplied with many auto-transmission kickdown cable kits, plus a separate side arm to provide a mount for traditional throttle return springs. Mount your hot rod cable throttle kit with Stromberg throttle cable brackets.
( 5 )
$49.95
Stromberg offers these choke cable mounting brackets as service parts for your Stromberg carburetor. These brackets are identical to the original ones that came on the special aftermarket 97s made for 1949-53 Ford models.
( 5 )
$37.00
Among their many benefits, Stromberg carburetor spacers reduce "percolating gas" spillage after you turn off the engine, thereby protecting the powdercoat finish on your manifold. Insulating the carburetor from the heat of the intake manifold can create a cooler, denser fuel mixture to increase horsepower. These 1/4 in. spacers are cut from natural canvas Grade C phenolic sheets in the classic brown color. The full kit includes two gaskets—used above and below the spacer. You can protect your carb and decrease fuel evaporation, vapor lock, and hard starting with Stromberg carburetor spacers. .
( 4 )
$33.95
—
$35.95
Nothing fits an original like the original, so when you need the right pieces to maintain your Stromberg, look for genuine Stromberg restoration parts. Their brass floats are precision-made on the original Stromberg vendor tooling for a no-hassle rebuild. The floats are supplied with a new float pin. Parts are designed and manufactured to the best available quality at a great value. Make sure that you have the genuine Stromberg stamp on your service parts for a perfect fit every time.
( 1 )
$25.95
Nothing fits an original like the original, so when you need the right pieces to maintain your Stromberg, look for genuine Stromberg service parts. Their emulsion tubes are precision-made from brass for a no-hassle rebuild. Parts are designed and manufactured to the best available quality at a great value. Make sure that you have the genuine Stromberg stamp on your service parts for a perfect fit every time.
Not Yet Reviewed
$26.50
Nothing fits an original like the original, so when you need the right pieces to maintain your Stromberg, look for genuine Stromberg service parts. Their throttle shaft and lever kits are made to fit so you'll have no-hassle repairs. These kits include screws and bushes. Parts are designed and manufactured to the best available quality at a great value. Make sure that you have the genuine Stromberg stamp on your service parts for a perfect fit every time.
( 3 )
$42.25
Nothing fits an original like the original, so when you need the right pieces to maintain your Stromberg, look for genuine Stromberg service parts. Their accelerator pump kits are made to fit for a no-hassle repair. These kits include springs, retainers, washers, felt gaskets, and cotter pins. They also have a kit for the Stromberg 81 with a correct 10-finger brass spring washer beneath a leather seal. Parts are designed and manufactured to the best available quality at a great value. Make sure that you have the genuine Stromberg stamp on your service parts for a perfect fit every time.
Not Yet Reviewed
$23.25
Stromberg long lever linkage shafts get you set up for high strength, without excess weight! These levers are zinc die-cast with a modern H-beam section and stainless steel swivels that are secured by small E-clips. Each swivel features a 3/16 in. diameter cross hole for the linkage rod and is fitted with a black knurled-tip set screw. The levers have countersunk stainless steel screws that match those on the carburetor and will thread directly into the arm for some serious grip—while the three adjustment/connecting holes allow you to move the swivel to change your linkage leverage and pedal/throttle response.
( 2 )
$22.95
These Stromberg carburetor spring kits include all of the exterior springs to help you get your carburetor hooked up again. They feature stainless steel construction, except for the idle adjuster spring, and have been manufactured to exacting OEM specifications.
Not Yet Reviewed
$20.50
These Stromberg SuperLink throttle arms feature a new take on the traditional multi-carb linkage arm. They feature zinc die-cast construction with a modern H-beam section for strength and a small reveal at the bottom edge for a period feel. The throttle arms are available with a stainless steel swivel secured buy a small e-clip on the back. All Stromberg SuperLink throttle arms have a countersunk stainless steel screw that matches those on the carburetor and threads directly into the arm.
( 3 )
$22.95
Stromberg Carburetors accelerator pump rods are designed to fit your Stromberg carburetor. They are offered for a choice of models. You can count on Stromberg for the service parts that you need to keep your carb working at its best.
( 1 )
$22.50
—
$23.25
Easy and accurate float adjustments are yours with these Stromberg fuel bowl sight plugs. They eliminate the problem of spilled fuel when adjusting float levels.
( 1 )
$22.50
Stromberg offers these choke kicker assemblies as service parts for your Stromberg carburetor. These assemblies include the choke lever, idle screw, and end stud and are available with a separate bracket.
Not Yet Reviewed
$42.25
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
