Filters
Build a bulletproof third member using these Strange Ultra cases. They require larger-than-OEM components and are therefore offered in these unique packages. The cases include: * Pinion support body * Pinion bearings and cups * Pinion bolts * Pinion depth shims * Pinion seal * Pinion nut * Side bearings and cups * Premium ring gear bolts * Tail bearing * Tail bearing retaining plate * Your choice of a 3.250 in., 3.812 in., or 4.000 in. bore diameter
Not Yet Reviewed
$1,594.99
—
$1,794.99
Strange Engineering's stainless steel brake kits are designed for drag racing's most abusive applications, offering drag racers a safer and more efficient alternative to conventional carbon steel brakes. Strange's Dynamic Drive Mount (DDM) system secures the stainless rotor with an internal Spirolox--eliminating all thermally generated stress from rotor attachment points and further reducing rotating weight. The system also permits the hat and rotor to expand and contract independently, allowing for thermal expansion, which drastically reduces warping, coning, and cracking. Strange Evolution Dynamic Drive Mount brake kits feature Evolution S DDM stainless steel rotors machined from premium stainless billets, proprietary heat treated, and fully ground. The kits also contain Evolution 4 calipers, high performance metallic or semi-metallic brake pads, additional components, and hardware. Together they produce more efficient accelerating and stopping of your drag racing vehicle. Kits are available for front or rear. Choose those designed for your vehicle. Evolution S DDM rotors: * Mounts to billet aluminum DDM hat reducing rotating weight * Exhibits 48 percent greater yield strength at 1,000 degrees F compared to carbon steel, further maintaining rotor integrity * Highly resistant to heat and corrosion * Unique Aero Slot design reduces rotating weight and promotes even heat dissipation, compared to common round drilled holes * Scalloped design further reduces rotating weight 4-piston billet Evolution 4 calipers: * Computer finite element analysis (FEA) optimized and field-tested caliper -- Design improves piston retraction, pedal feel, and stiffness -- Results in improved pad wear and exemplary braking efficiency * High-retraction piston and O-ring design to eliminate drag during acceleration * Stainless steel pistons mitigate heat transfer to brake fluid * Reverse dish pressure vessel piston maximizes stiffness * All 1.750 in. pistons provide increased clamping force * Type II black anodized finish resists corrosion, heat, and brake fluid Aluminum caliper mounts: * Billet one piece design * Eliminates bolts, spacers, and nuts that require periodic maintenance Brake pads: * DTC-30 semi-metallic brake pads -- Available in rear or front kits -- Provides the best starting line cold holding power -- Recommended for vehicles going 150 mph or less in the 1/4 mile * DRM-35 metallic brake pad -- Available in rear kits only -- Provides high resistance to brake fade -- Recommended for vehicles going over 150 mph in the 1/4 mile -- Maintains decent starting line cold holding capabilities -- May leave pad residue on rotors when not using parachute -- While common, it's recommended to remove when installing new pads Housing end stud kits: * Rear kits * Provides additional components not supplied in most aftermarket kits Screw-in wheel studs: * Front kits * Tapered Allen 1/2 in.-20 x 2 1/2 in. Billet aluminum hubs: * Front kits * Strong lightweight material * Lightening holes for enhanced weight reduction * Billet hub caps with O-rings and Strange branding * Bearings, races, and seals
Not Yet Reviewed
$1,593.99
Strange custom Ford 9 in. Pro Iron center sections will give you the perfect foundation for a high-quality, bulletproof rear differential. They feature a fully assembled nodular iron case, posi-unit/spool, upgraded pinion support, S-Series yoke, and ring and pinion set. Specification will be required to complete order. Please call us at 1-800-230-3030 for further information.
( 1 )
$1,594.99
—
$1,649.99
Strange Engineering has developed the iconic Ford 9 in. rear axle into an extensive line of parts and complete HD Pro aluminum custom order assemblies that take advantage of the strengths of the original, while improving on strength, performance, and flexibility. These axles consist of forged aluminum pinion supports, with a lightweight steel spool or clutch posi unit and your choice of gear ratio in a standard gear, fully assembled with yoke. The most popular rear-end around is the Ford 9 inch unit; it is used by restorers, street rodders, and racers alike, regardless of what brand of car they're restoring.
( 1 )
$1,734.99
—
$2,034.99
These Strange lightweight single-piston aluminum strut packages will give your race car the consistency you need. They are recommended for vehicles under 2,400 lbs. and are designed for drag racing only. The packages include the following: * Strange spindle mount brake kit * chromoly lower control arm kit * Strange externally adjustable forged aluminum struts * Hypercoil springs * Spring seat bearing kit A specification sheet must be filled out prior to ordering. The bolt pattern, lower control arm rod end diameter, and coilover spring rate are needed for your application. Please call us at 1-800-230-3030 for further information.
Not Yet Reviewed
$1,969.99
—
$1,974.99
Strange Ford 9 in. lightweight aluminum center sections will give you the perfect foundation for a high-quality, bulletproof rear differential. They feature a fully assembled aluminum case with a full spool, forged aluminum pinion support, S-series yoke, and ring and pinion set. A specification sheet is required to be filled out prior to ordering.
( 2 )
$1,589.99
—
$1,774.99
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
