Availability
On Sale
Steer Smarts Yeti XD tie rod assemblies are a direct bolt-on for any Jeep JK Wrangler. They install in just minutes with no need for modifications. The tie rods are engineered for proper clearance to other components to eliminate interferences. Additional component details: TIE ROD ENDS: * Powdercoat over E-coat for a long-lasting appearance under harsh conditions * External threads are E-coated for durability and long-term serviceability * Forged from medium carbon high-hardenability steel and heat-treated for even greater buckling, impact, and fatigue strength * Large 1 1/4 in. rolled threads at tie rod adjuster and drag link ends provide significantly increased strength over the original equipment threads * Unique "Reverse Pin" technology prevents linkage from flopping or rocking. This technology is built into the socket, unlike the weak external supports on some competitor linkages BALL JOINTS: * 30mm 2 1/2 ton ball joints designed specifically for the JK * Cold-headed medium carbon alloy steel ball studs provide incredible impact toughness for extreme duty usage * Induction heat-treated ball studs provide ultimate fatigue strength and superior off-road durability * Steel-on-steel bearings provide exceptional ball joint wear resistance and robustness * High-quality seals ensure long ball joint life. They've been rigorously tested to minimize leakage between grease service intervals, which greatly improves ball joint reliability over our competition * Fully greaseable ADJUSTER SLEEVE: * Tie rod adjuster is manufactured from large diameter 1/4 in. thick wall high-strength 4130 chromoly steel tubing for maximum buckling strength * Adjuster clamps ensure proper clamp force using conventional tools without the possible risk of loosening like large jam nuts * Designed with right-hand and left-hand threads for quick and easy adjustment when installed on the vehicle * Internal threads and tubes are also E-coated for long-term serviceability
Not Yet Reviewed
$475.00
$380.00
On Sale
For those who want a bolt-in, no modification required, heavy-duty steering system for many Jeep Wranglers and Gladiators (2007 and up), Steer Smarts has the solution for you. This one-click kit includes a Yeti XD tie rod, bottom mount drag link, and 1 5/8 in. aluminum damper bracket. You can round out the front-end trifecta by adding Steer Smarts' Yeti XD front adjustable track bar for the ultimate front-end setup. * Note: Not compatible with stock JK or Super Duty Dana 60 axles. Only with upgraded aftermarket DANA Ultimate Dana 60 axle Product features: YETI XD TIE ROD + DRAG LINK ASSEMBLIES: * Easy bolt-on installation * Engineered for proper clearance to other chassis components to eliminate interferences BALL JOINTS: * 30mm 1 1/2 ton ball joints are designed specifically for the JK with a UD60 (68.5 in. wide) * Cold-headed medium carbon alloy steel ball studs provide incredible impact toughness for extreme-duty usage * Induction heat-treated ball studs provide ultimate fatigue strength and superior off-road durability * Steel on steel bearings provide exceptional ball joint wear resistance and robustness * High-quality seals ensure ball joints' life is long-lived. These superior seals have been rigorously tested to minimize leakage between grease service intervals which significantly improves ball joint reliability over the competition * Fully greaseable TIE ROD + DRAG LINK ENDS: * Powdercoat over E-coat for a long-lasting appearance under harsh conditions * External threads are E-coated for durability and long-term serviceability * Forged from medium carbon high hardenability steel and heat-treated for even greater buckling, impact, and fatigue strength * Large 1 1/4 in. rolled threads at tie rod adjuster and drag link ends provide significantly increased strength over the original equipment threads * Unique "Reverse Pin" technology on the passenger-side ends prevents linkage from unwanted flopping/rocking. This technology is built into the socket, unlike the weak external supports on some competitor linkages ADJUSTER TUBES: * Tie rod and drag link adjusters are manufactured from large diameter 1/4 in. thick wall high-strength 4130 chromoly steel tubing for maximum buckling strength * Adjuster clamps assure proper clamp force using conventional tools without the possible risk of loosening like large jam nuts * Designed with right-hand and left-hand threads for quick and easy adjustment when installed on the vehicle * Internal threads and tube are also E-coated for long-term serviceability * Yeti XD tie rod and drag link fit all left-hand drive JK Wrangler models 2007-2018 equipped with a Dana UD60 (68.5 in. wide)
Not Yet Reviewed
$1,035.00
—
$1,045.00
$828.00
—
$836.00
On Sale
Steer Smarts delivers their most extreme steering linkage--Yeti XD Series linkage equipped with their Griffin XD attenuator. They applied 85 years of steering "lessons learned" to develop the strongest most durable linkage ever built for a Jeep. Adding a top-mounted drag link to your Jeep was a daunting task, to say the least. But Steer Smarts patented reverse taper mount changed that, making the task a simple process. Steer Smarts YETI XD drag links are completely bolt-on—even the top-mount links, installing in just minutes, bolting to the factory tapered knuckle hole and the factory pitman arm hole. Steer Smarts Yeti XD drag links with Griffin XD attenuator are available in bottom-mount or "No Drill" top-mount versions with red or black bellows. Select the drag link designed for your Jeep. Features: * Yeti XD/Griffin XD assembly: -- Easy bolt-on installation -- Engineered for proper clearance with chassis components, eliminating interferences * Ball joints: -- 30mm 2 1/2-ton ball joints designed specifically for specific Jeep model -- Cold headed medium carbon alloy steel ball studs provide incredible impact toughness for extreme duty usage -- Induction heat-treated ball studs provide ultimate fatigue strength and superior off-road durability -- Steel-on-steel bearings provide exceptional ball joint wear resistance and robustness -- High-quality seals ensure long ball joint life and are rigorously tested to minimize leakage between grease service intervals, improving ball joint reliability -- Fully greaseable * Drag link ends: -- Powdercoat over e-coat for a long-lasting appearance under harsh conditions -- External threads are e-coated for durability and long term serviceability -- Forged from medium carbon high-hardened steel and heat-treated for even greater buckling, impact, and fatigue strength. -- Large 1 1/4 in. rolled threads at tie rod adjuster and drag link ends provide significantly increased strength over the original equipment threads -- Unique "reverse pin" technology built into the socket prevents linkage from flopping or rocking * Griffen XD attenuator: -- Reduces harsh and negative feedback to your steering wheel -- Drag link adjuster is manufactured from large diameter 1/4 in. thick wall high-strength 4130 chromoly steel tubing for maximum buckling strength -- Adjuster clamps ensure proper clamp force using conventional tools without the possible risk of loosening like large jam nuts -- Designed with right-hand and left-hand threads for quick and easy adjustment when installed on the vehicle -- Internal threads and tube are also e-coated for long term serviceability
( 1 )
$699.00
$559.20
On Sale
Yeti XD Series is Steer Smarts' most extreme steering linkage for your Jeep JK Wrangler. These "No Drill" top mount drag links are complete bolt-ons for high steer applications—and feature the patent pending reverse taper mount design. They're the quickest and easiest drag link flip on the market; installation takes just minutes, and there's no need to modify or alter your stock knuckle. The drag links bolt to the factory tapered knuckle hole and the factory pitman arm hole. Additional details: * Easy bolt-on installation * Engineered for proper clearance to other chassis components to eliminate interferences * A minimum of 17 in. wheels is recommended. 16 in. wheels with a maximum 4.5 backspacing might fit but not guaranteed BALL JOINTS: * 30mm 2 1/2 ton ball joints designed specifically for the JK * Cold-headed medium carbon alloy steel ball studs provide incredible impact toughness for extreme duty usage * Induction heat-treated ball studs provide ultimate fatigue strength and superior off-road durability * Steel-on-steel bearings provide exceptional ball joint wear resistance and robustness * High-quality seals ensure long ball joint life. They've been rigorously tested to minimize leakage between grease service intervals, which greatly improves Steer Smarts' ball joint reliability over the competition * Fully greaseable DRAG LINK ENDS: * Powdercoat over E-coat for a long-lasting appearance under harsh conditions * External threads are E-coated for durability and long-term serviceability * Forged from medium carbon high harden-ability steel and heat-treated for greater buckling, impact, and fatigue strength * Forged from medium carbon high-hardenability steel and heat-treated for even greater buckling, impact, and fatigue strength * Large 1 1/4 in. rolled threads at tie rod adjuster and drag link ends provide significantly increased strength over the original equipment threads * Unique "Reverse Pin" technology prevents the linkage from flopping or rocking. This technology is built into the socket, unlike the weak external supports on some competitor linkages ADJUSTER TUBE: * Drag link adjuster is manufactured from large diameter 1/4 in. thick wall high-strength 4130 chromoly steel tubing for maximum buckling strength * Adjuster clamps assure proper clamp force using conventional tools without the possible risk of loosening like large jam nuts * Designed with right hand and left hand threads for quick and easy adjustment when installed on the vehicle * Internal threads and tube are also E-coated for long-term serviceability
Not Yet Reviewed
$475.00
$380.00
On Sale
Steer Smarts YETI XD sector shaft braces will make an immediately noticeable improvement to the overall drivability of your vehicle. These braces with frame-side track bar reinforcement bracket, were engineered to bolt onto the stock track bar mount on the frame. The purpose of this is two-fold. First, the sector shaft support is meant to help minimize the aluminum and steel steering gears from flexing, deflecting, moving when cycling your steering system side to side. The second part is to reinforce the frame-side track bar mounting location to help minimize the deflection of these frame-side brackets and ensure that the mount doesn't break under extreme stress. Select the one designed for your Jeep. Features: * Easy bolt-on installation with minimal modification needed * 1/4 in. thick wall steel laser-cut bracket * 1/2 in. steel sector support with sealed roller bearing * All upgraded fasteners included * E-coated for corrosion resistance that won't chip when torqued
Not Yet Reviewed
$320.00
$256.00
On Sale
Steer Smarts offers Yeti XD drag link adjuster sleeves for a variety of applications, including 2013-18 RAM 2500/3500 trucks. These upgraded sleeves are a proper fix for the recalled 2013-18 models. They utilize clamps instead of jam nuts and eliminate the need to tack-weld the factory jam nuts to retain steering alignment. The adjuster sleeves are a direct bolt-on and install in just minutes with no need to modify or alter your vehicle. They are engineered for proper clearance to other chassis components to eliminate interferences. Additional notes: * Tie rod adjuster is manufactured from large diameter 1/4 in. thick wall high-strength 4130 chromoly steel tubing for maximum buckling strength * Adjuster clamps assure proper clamp force using conventional tools without the possible risk of loosening like large jam nuts * Designed with right-hand and left-hand threads for quick and easy adjustment when installed on the vehicle
Not Yet Reviewed
$145.00
$116.00
On Sale
Steer Smarts YETI XD steering stabilizer relocation brackets were engineered to relocate your stock stabilizer mounting location, moving it up higher to protect it from potential damage from impact while also improving the force transfer angle. Two different versions are available, but both are made from 1/4 in. thick wall steel, include all fasteners, and offer an easy bolt-on installation with minimal modification needed. Select the one needed for your Jeep.
Not Yet Reviewed
$79.00
$63.20
On Sale
Steer Smarts Yeti HD aluminum steering stabilizer/damper brackets are engineered to fit a wide variety of applications, including Yeti XD tie rods, Yeti XD Pro-Series aluminum tie rods, stock JL tie rods, and most aftermarket tie rods. These damper brackets are designed to fit a standard steering stabilizer without any modification. Additional details: * Easy bolt-on installation * Sizes for 1 5/8 in., 1 3/4 in. and 40mm tie rods (uses 1 5/8 in. clamp) * Fully CNC-machined * M12x1.75 hole for mounting a standard steering stabilizer * Hard-coated for lasting appearance under harsh conditions * Engineered for proper clearance to other chassis components * Works with RHD vehicles
Not Yet Reviewed
$85.00
$68.00
On Sale
Steer Smarts' HD-N Neutral steering stabilizers are cost-effective units optimized to work in conjunction with their Griffin XD Attenuator. The Neutral action on these stabilizers works as a true damper, absorbing the resonance frequencies and jolts rather than exerting a force against the tie rod. While optimized for Steer Smarts Griffin XD, HD-N dampers are effective upgrades from the stock stabilizers for all setups. For a smoother driving experience with easy bolt-on installation, select the Steer Smarts HD-N steering stabilizers designed for your vehicle.
( 1 )
$79.00
—
$89.00
$63.20
—
$71.20
On Sale
Steer Smarts Yeti XD Flex steering stabilizer damper brackets are engineered to be the most versatile and robust damper bracket available for the Jeep Wrangler JK. They're designed to fit Yeti XD tie rods and will also fit most aftermarket 1 5/8 in. tie rods. This one bracket will fit a standard steering stabilizer or a hydro-assist ram without any modification. Additional details: * Easy bolt-on installation * Fits any 1 5/8 in. tie rod * Fully CNC-machined * M12x1.75 hole on one side for mounting a standard steering stabilizer * 5/8 in.-11 hole on one side for mounting a hydro-assist ram * E-coated for lasting appearance under harsh conditions * Engineered for proper clearance to other chassis components * Works with RHD vehicles
Not Yet Reviewed
$99.00
$79.20
On Sale
Steer Smarts Griffin XD steering attenuator drag link adjusters are a highly engineered, direct swap-out for your Yeti XD drag link adjusting sleeve. They're specifically designed for the extreme stresses of off-roading and reduce the harsh road feedback inherent in the steering system. Simply put, the adjusters improve the drivability of the vehicle and give you peace of mind, whether hitting the streets or the trail. Additional details: * Reduces negative feedback to your steering wheel * Easy bolt-on installation * Designed for the proper clearance to other chassis components to eliminate interference * E-coated for a long-lasting appearance under harsh conditions * Available with a red or black bellow * Patented design * The Griffin XD is recommended for the following applications: -- Wranglers equipped with 35 in. tires or larger -- Compatible with JK, JL, JT equipped with a Yeti XD drag link * JK/JKU Jeeps equipped with Hard Rock/Anniversary Edition factory skid plates will need to slightly modify skid plate to clearance for the Griffin XD * JT Mojave owners: Front skid plate will interfere with this part. If you want to run the attenuator, you will need to remove the skid plate or modify
Not Yet Reviewed
$349.00
$279.20
On Sale
Steer Smarts offers Yeti XD tie rod end replacements to service your drag links. They are available for both the driver and passenger side of your Jeep. Please note: They are not compatible with stock tie rod adjuster sleeve. Features: * 30mm 2 1/2-ton ball joints designed specifically for Jeep JKs * Cold headed medium carbon alloy steel ball studs provide incredible impact toughness for extreme duty usage * Induction heat-treated ball studs provide ultimate fatigue strength and superior off-road durability * Steel-on-steel bearings provide exceptional ball joint wear resistance and robustness * High-quality seals ensure long ball joint life and are rigorously tested to minimize leakage between grease service intervals, improving ball joint reliability * Fully greaseable
Not Yet Reviewed
$199.00
$159.20
On Sale
Steer Smarts presents extreme steering linkage--Yeti XD Series linkage for Jeeps. They applied 85 years of steering "lessons learned" to develop the strongest most durable linkage ever built for Jeeps. Yeti XD Pro-Series tie rod assemblies are direct bolt-ons and can be installed in just minutes--no need to modify or alter your Jeep. Features: * Ball joints: -- 30mm 2 1/2 Ton ball joints designed specifically for the specific Jeep -- Cold-headed medium carbon alloy steel ball studs provide incredible impact toughness for extreme duty usage -- Induction heat-treated ball studs provide ultimate fatigue strength and superior off-road durability -- Steel-on-steel bearings provide exceptional ball joint wear resistance and robustness -- High-quality seals ensure long ball joint life and are rigorously tested to minimize leakage between grease service intervals, improving ball joint reliability -- Fully greaseable * Tie rod ends: -- Powdercoat over e-coat for a long-lasting appearance under harsh conditions -- External threads are e-coated for durability and long-term serviceability -- Forged from medium carbon high hardenability steel and heat-treated for even greater buckling, impact, and fatigue strength -- Large 1 1/4 in. rolled threads at tie rod adjuster and draglink ends provide significantly increased strength over the original equipment threads -- Unique "reverse pin" technology built into the socket prevents linkage from flopping or rocking * Adjuster sleeve: -- Engineered for proper clearance with chassis components to eliminate interference -- Tie rod adjuster is manufactured from large 1 3/4 in. diameter solid high-strength 7075 aluminum for maximum strength -- Pro-Series adjuster clamps ensure proper clamp force using conventional tools without the possible risk of loosening like large jam nuts -- Designed with right-hand and left-hand threads for quick and easy adjustment when installed on the vehicle -- Hard coated for long term serviceability and durability
Not Yet Reviewed
$599.00
$479.20
On Sale
Steer Smarts Yeti XD tie rod ends for the Ford Bronco are all forged extreme-duty upgrades that are durable and built to last. Featuring proprietary jam nuts that reinforce the stock inner, these tie rod ends are as beefy as they come and ready to take on whatever and wherever adventure takes you. Steer Smarts Yeti XD tie rod ends are available in red or black. Select the color preferred. Features include: * 76 percent larger diameter than stock OE tie rod ends (38.5mm vs. 21.8mm) * Forged from solid steel for significant improvement in buckling, impact, and fatigue strength * 30mm metal-on-metal ball studs (versus stock OE 25mm metal-on-plastic) * Dual protective coatings: -- E-coated and powdercoated for a long lasting, durable appearance * Greasable Zerk fitting for easy maintenance and extended longevity * Magni-coated jam nut and hardware for maximum corrosion resistance * Cap-caps to cover the spun cap of the tie rod ends and keep debris out * Fully adjustable on the vehicle * Works on stock height (no lift) up to 4 in. lift * Easy bolt-on installation * Includes all necessary installation hardware
Not Yet Reviewed
$299.00
$239.20
On Sale
Steer Smarts offers Yeti XD outer drag link ends for a variety of Jeep Wrangler and Gladiator models from 2007 and up. These replacements are available separately for the driver and passenger side. They're manufactured from factory materials and specifications to ensure proper fitment and long-lasting performance. The drag link ends are available for use with bottom-mount drag links, no-drill top-mount drag links, and high steer knuckles with factory taper.
Not Yet Reviewed
$199.00
$159.20
On Sale
Steer Smarts offers Yeti XD inner drag link ends for a variety of Jeep Wrangler and Gladiator models from 2007 and up. These replacements are available separately for the driver and passenger side. They're manufactured from factory materials and specifications to ensure proper fitment and long-lasting performance.
Not Yet Reviewed
$155.00
$124.00
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
