Availability
On Sale
Steer Smarts Yeti XD tie rod assemblies are a direct bolt-on for any Jeep JK Wrangler. They install in just minutes with no need for modifications. The tie rods are engineered for proper clearance to other components to eliminate interferences. Additional component details: TIE ROD ENDS: * Powdercoat over E-coat for a long-lasting appearance under harsh conditions * External threads are E-coated for durability and long-term serviceability * Forged from medium carbon high-hardenability steel and heat-treated for even greater buckling, impact, and fatigue strength * Large 1 1/4 in. rolled threads at tie rod adjuster and drag link ends provide significantly increased strength over the original equipment threads * Unique "Reverse Pin" technology prevents linkage from flopping or rocking. This technology is built into the socket, unlike the weak external supports on some competitor linkages BALL JOINTS: * 30mm 2 1/2 ton ball joints designed specifically for the JK * Cold-headed medium carbon alloy steel ball studs provide incredible impact toughness for extreme duty usage * Induction heat-treated ball studs provide ultimate fatigue strength and superior off-road durability * Steel-on-steel bearings provide exceptional ball joint wear resistance and robustness * High-quality seals ensure long ball joint life. They've been rigorously tested to minimize leakage between grease service intervals, which greatly improves ball joint reliability over our competition * Fully greaseable ADJUSTER SLEEVE: * Tie rod adjuster is manufactured from large diameter 1/4 in. thick wall high-strength 4130 chromoly steel tubing for maximum buckling strength * Adjuster clamps ensure proper clamp force using conventional tools without the possible risk of loosening like large jam nuts * Designed with right-hand and left-hand threads for quick and easy adjustment when installed on the vehicle * Internal threads and tubes are also E-coated for long-term serviceability
Not Yet Reviewed
$475.00
$380.00
On Sale
Steer Smarts YETI XD sector shaft braces will make an immediately noticeable improvement to the overall drivability of your vehicle. These braces with frame-side track bar reinforcement bracket, were engineered to bolt onto the stock track bar mount on the frame. The purpose of this is two-fold. First, the sector shaft support is meant to help minimize the aluminum and steel steering gears from flexing, deflecting, moving when cycling your steering system side to side. The second part is to reinforce the frame-side track bar mounting location to help minimize the deflection of these frame-side brackets and ensure that the mount doesn't break under extreme stress. Select the one designed for your Jeep. Features: * Easy bolt-on installation with minimal modification needed * 1/4 in. thick wall steel laser-cut bracket * 1/2 in. steel sector support with sealed roller bearing * All upgraded fasteners included * E-coated for corrosion resistance that won't chip when torqued
Not Yet Reviewed
$320.00
$256.00
On Sale
Steer Smarts offers Yeti XD Pro-Series front track bars for a variety of applications, including many Jeep models from 2007 and up. They're fully adjustable on the vehicle and are designed to be the strongest track bar available for the Wrangler JL/JT. Pro-Series bars come with polyurethane bushings rather than rubber, which is a harder durometer, limiting the amount of deflection allowed by the bushing. Available in red or black. Additional details: * Easy bolt-on installation * Works on stock height (no lift) up to 6.5 in. lift * E-coated and powdercoated for a long-lasting appearance under harsh conditions * Engineered for proper clearance to other chassis components to eliminate interferences * Forged from solid steel for greater buckling, impact, and fatigue strength * Designed to correct track bar geometry on the Jeep Wrangler JL * Includes all necessary installation hardware
( 1 )
$335.00
$268.00
On Sale
Steer Smarts offers Yeti XD track bars for a variety of applications. They're fully adjustable on the vehicle and are designed to be the strongest track bar available. Available for front or rear, in black or red. Additional details: * Easy bolt-on installation * Works on stock height (no lift) up to a 6.5 in. lift * E-coated and powdercoated for a long-lasting appearance under harsh conditions * Engineered for proper clearance to other chassis components to eliminate interferences * Forged from 2 in. steel for greater buckling, impact, and fatigue strength * Designed to correct track bar geometry * Includes all necessary installation hardware
Not Yet Reviewed
$325.00
—
$399.00
$260.00
—
$319.20
On Sale
Yeti XD Series is Steer Smarts' most extreme steering linkage for your Jeep JK Wrangler. These "No Drill" top mount drag links are complete bolt-ons for high steer applications—and feature the patent pending reverse taper mount design. They're the quickest and easiest drag link flip on the market; installation takes just minutes, and there's no need to modify or alter your stock knuckle. The drag links bolt to the factory tapered knuckle hole and the factory pitman arm hole. Additional details: * Easy bolt-on installation * Engineered for proper clearance to other chassis components to eliminate interferences * A minimum of 17 in. wheels is recommended. 16 in. wheels with a maximum 4.5 backspacing might fit but not guaranteed BALL JOINTS: * 30mm 2 1/2 ton ball joints designed specifically for the JK * Cold-headed medium carbon alloy steel ball studs provide incredible impact toughness for extreme duty usage * Induction heat-treated ball studs provide ultimate fatigue strength and superior off-road durability * Steel-on-steel bearings provide exceptional ball joint wear resistance and robustness * High-quality seals ensure long ball joint life. They've been rigorously tested to minimize leakage between grease service intervals, which greatly improves Steer Smarts' ball joint reliability over the competition * Fully greaseable DRAG LINK ENDS: * Powdercoat over E-coat for a long-lasting appearance under harsh conditions * External threads are E-coated for durability and long-term serviceability * Forged from medium carbon high harden-ability steel and heat-treated for greater buckling, impact, and fatigue strength * Forged from medium carbon high-hardenability steel and heat-treated for even greater buckling, impact, and fatigue strength * Large 1 1/4 in. rolled threads at tie rod adjuster and drag link ends provide significantly increased strength over the original equipment threads * Unique "Reverse Pin" technology prevents the linkage from flopping or rocking. This technology is built into the socket, unlike the weak external supports on some competitor linkages ADJUSTER TUBE: * Drag link adjuster is manufactured from large diameter 1/4 in. thick wall high-strength 4130 chromoly steel tubing for maximum buckling strength * Adjuster clamps assure proper clamp force using conventional tools without the possible risk of loosening like large jam nuts * Designed with right hand and left hand threads for quick and easy adjustment when installed on the vehicle * Internal threads and tube are also E-coated for long-term serviceability
Not Yet Reviewed
$475.00
$380.00
On Sale
Steer Smarts Griffin XD steering attenuator drag link adjusters are a highly engineered, direct swap-out for your Yeti XD drag link adjusting sleeve. They're specifically designed for the extreme stresses of off-roading and reduce the harsh road feedback inherent in the steering system. Simply put, the adjusters improve the drivability of the vehicle and give you peace of mind, whether hitting the streets or the trail. Additional details: * Reduces negative feedback to your steering wheel * Easy bolt-on installation * Designed for the proper clearance to other chassis components to eliminate interference * E-coated for a long-lasting appearance under harsh conditions * Available with a red or black bellow * Patented design * The Griffin XD is recommended for the following applications: -- Wranglers equipped with 35 in. tires or larger -- Compatible with JK, JL, JT equipped with a Yeti XD drag link * JK/JKU Jeeps equipped with Hard Rock/Anniversary Edition factory skid plates will need to slightly modify skid plate to clearance for the Griffin XD * JT Mojave owners: Front skid plate will interfere with this part. If you want to run the attenuator, you will need to remove the skid plate or modify
Not Yet Reviewed
$349.00
$279.20
On Sale
Steer Smarts presents extreme steering linkage--Yeti XD Series linkage for Jeeps. They applied 85 years of steering "lessons learned" to develop the strongest most durable linkage ever built for Jeeps. Yeti XD Pro-Series tie rod assemblies are direct bolt-ons and can be installed in just minutes--no need to modify or alter your Jeep. Features: * Ball joints: -- 30mm 2 1/2 Ton ball joints designed specifically for the specific Jeep -- Cold-headed medium carbon alloy steel ball studs provide incredible impact toughness for extreme duty usage -- Induction heat-treated ball studs provide ultimate fatigue strength and superior off-road durability -- Steel-on-steel bearings provide exceptional ball joint wear resistance and robustness -- High-quality seals ensure long ball joint life and are rigorously tested to minimize leakage between grease service intervals, improving ball joint reliability -- Fully greaseable * Tie rod ends: -- Powdercoat over e-coat for a long-lasting appearance under harsh conditions -- External threads are e-coated for durability and long-term serviceability -- Forged from medium carbon high hardenability steel and heat-treated for even greater buckling, impact, and fatigue strength -- Large 1 1/4 in. rolled threads at tie rod adjuster and draglink ends provide significantly increased strength over the original equipment threads -- Unique "reverse pin" technology built into the socket prevents linkage from flopping or rocking * Adjuster sleeve: -- Engineered for proper clearance with chassis components to eliminate interference -- Tie rod adjuster is manufactured from large 1 3/4 in. diameter solid high-strength 7075 aluminum for maximum strength -- Pro-Series adjuster clamps ensure proper clamp force using conventional tools without the possible risk of loosening like large jam nuts -- Designed with right-hand and left-hand threads for quick and easy adjustment when installed on the vehicle -- Hard coated for long term serviceability and durability
Not Yet Reviewed
$599.00
$479.20
On Sale
Steer Smarts Yeti XD top mount drag links for a high-steer or drilled-out OE knuckle was designed to be a complete bolt-on for Jeep JKs that have already been modified for a flipped draglink. They install in just minutes and bolt to a sleeved factory knuckle or high-steer knuckle hole and the factory pitman arm hole. Features: * Yeti XD assembly: -- Easy bolt-on installation -- Engineered for proper clearance with chassis components, eliminating interferences * Ball joints: -- 30mm 2 1/2-ton ball joints designed specifically for Jeep JKs -- Cold headed medium carbon alloy steel ball studs provide incredible impact toughness for extreme duty usage -- Induction heat-treated ball studs provide ultimate fatigue strength and superior off-road durability -- Steel-on-steel bearings provide exceptional ball joint wear resistance and robustness -- High-quality seals ensure long ball joint life and are rigorously tested to minimize leakage between grease service intervals, improving ball joint reliability -- Fully greaseable * Drag link ends: -- Powdercoat over e-coat for a long-lasting appearance under harsh conditions -- External threads are e-coated for durability and long term serviceability -- Forged from medium carbon high-hardened steel and heat-treated for even greater buckling, impact, and fatigue strength. -- Large 1 1/4 in. rolled threads at tie rod adjuster and drag link ends provide significantly increased strength over the original equipment threads -- Unique "reverse pin" technology built into the socket prevents linkage from flopping or rocking * Adjuster tube: -- Drag link adjuster is manufactured from large diameter 1/4 in. thick wall high-strength 4130 chromoly steel tubing for maximum buckling strength -- Adjuster clamps ensure proper clamp force using conventional tools without the possible risk of loosening like large jam nuts -- Designed with right-hand and left-hand threads for quick and easy adjustment when installed on the vehicle -- Internal threads and tube are also e-coated for long term serviceability
Not Yet Reviewed
$475.00
$380.00
On Sale
Steer Smarts Yeti HD 26 Series outer drag linkage was engineered from the ground up with extreme detail to every component. The Yeti HD 26 with the Griffin attenuator is a direct bolt-on for your lifted Jeep JK. These top-mounted drag link end and attenuator combos will help realign the steering geometry of Jeep JKs with more than a 3.5 in. lift and will reduce the harsh road feedback inherent in the stock JK steering system. The kits feature Steer Smarts' patent pending reverse taper mount for ease of installation—and require no modifications to the stock knuckle and bolts to the factory tapered knuckle and factory upper drag link end. Additional features: -- OUTER DRAG LINK ASSEMBLY: * Easy bolt-on installation * E-coated for a long-lasting appearance under harsh conditions * Engineered for proper clearance to other chassis components to eliminate interferences * Patent pending "No Drill" reverse taper mount makes for a quick and easy installation without the need of drilling or altering your knuckle * External threads are E-coated for durability and long-term serviceability * Forged from 15v41 medium carbon high harden-ability steel and heat-treated for greater buckling, impact, and fatigue strength -- BALL JOINT: * 26mm ball joint * Cold headed medium carbon alloy steel ball studs provide incredible impact toughness * Ball studs are also induction heat-treated, greatly improving their ultimate and fatigue strength, as well as wear resistance for superior off-road durability * Steel bearings are also used for exceptional ball joint wear resistance and robustness * High-quality OE-style seal that ensures longer ball joint life * Ball joint is greaseable for greater reliability -- GRIFFIN HD: * Reduces harsh and negative feedback to your steering wheel * Easy bolt-on installation * Designed for the proper clearance to other chassis components to eliminate interferences * E-coated for long-lasting appearance under harsh conditions NOTES: * Outer drag link end fits all left-hand drive JK Wrangler models 2007 to 2017, including Rubicon and Unlimited * A minimum lift height of 3-3.5 in. (and correct bump stop) is required for a top-mount drag link. Minimum height requirements will vary by lift manufacturer. Part number 79017001 (Track Bar Relocation Bracket) is necessary when flipping your drag link to maintain proper parallel geometry track bar and drag link.
Not Yet Reviewed
$389.00
$311.20
On Sale
The YETI XD Series is Steer Smarts' most extreme steering linkage for your Jeep equipped with a Dana UD60 (68.5 in. wide). It's the strongest, most durable linkage ever engineered for the Wrangler and Gladiator. These complete bolt-on bottom-mount drag links install in just minutes—and bolt to the factory tapered knuckle hole and the factory pitman arm hole. Additional details: YETI XD DRAG LINK ASSEMBLY: * Engineered for proper clearance to other chassis components to eliminate interferences. BALL JOINTS: * 30mm 1-1/2 ton ball joints are designed specifically for the JL with a UD60 or PR60 (68.5 in. wide) * Cold-headed medium carbon alloy steel ball studs provide incredible impact toughness for extreme duty usage * Induction heat-treated ball studs provide ultimate fatigue strength and superior off-road durability * Steel on steel bearings provide exceptional ball joint wear resistance and robustness * High-quality seals ensure long ball joint life. These superior seals have been rigorously tested to minimize leakage between grease service intervals which greatly improves ball joint reliability over the competition * Fully greaseable DRAGLINK ENDS: * Powdercoat over E-coat for a long-lasting appearance under harsh conditions * External threads are E-coated for durability and long-term serviceability * Forged from medium carbon high harden-ability steel and heat-treated for greater buckling, impact, and fatigue strength * Large 1 1/4 in. rolled threads at tie rod adjuster and drag link ends provide significantly increased strength over the original equipment threads * Unique "Reverse Pin" technology prevents linkage from flopping or rocking. This technology is built into the socket, unlike the weak external supports on some competitor linkages ADJUSTER TUBE: * Drag link adjuster is manufactured from large diameter 1/4 in. thick wall high-strength 4130 chromoly steel tubing for maximum buckling strength * Adjuster clamps assure proper clamp force using conventional tools without the possible risk of loosening like large jam nuts * Designed with right-hand and left-hand threads for quick and easy adjustment when installed on the vehicle * Internal threads and tube are also E-coated for long term serviceability * Drag link fits all left-hand drive JL Wrangler models 2018+, including Rubicon and Unlimited equipped with a UD60 or PR60 (68.5 in. wide)
Not Yet Reviewed
$485.00
$388.00
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
