Availability
It all started in 1988 with one Mustang and a quest for unparalleled performance. Today, Steeda has transformed into one of the world’s largest manufacturers of...
It all started in 1988 with one Mustang and a quest for unparalleled performance. Today, Steeda has transformed into one of the world’s largest manufacturers of Ford performance parts and accessories. Steeda provides parts that include: suspension and brake components, exhaust systems, interior and exterior styling accessories, all-out air/fuel power products, transmission components, and more. Whether you’re upgrading your street machine or pavement-burning racer, Steeda has the parts you need for ultimate performance. Discover the power of Steeda, right here at Summit Racing!
It all started in 1988 with one Mustang and a quest for unparalleled performance. Today, Steeda has transformed into one of the world’s largest manufacturers of Ford performance parts and accessories. Steeda provides parts that include: suspension and brake components, exhaust systems, interior and exterior styling accessories, all-out air/fuel power products, transmission components, and more. Whether you’re upgrading your street machine or pavement-burning racer, Steeda has the parts you need for ultimate performance. Discover the power of Steeda, right here at Summit Racing!
Reinforce your late-model Ford chassis with Steeda S550 Mustang rear IRS subframe support braces. These chromoly steel aftermarket stabilizers connect three key points on either side of the undercarriage: the rocker panel, the front mount of the rear suspension subframe, and the rear mount of the lower control arm. This adds much-needed rigidity and overall control of the vehicle. Steeda braces will limit twisting and vibrations for improved cornering, less wheel hop, and no additional noise. The stiffeners use existing holes in the chassis, and require no modifications—installation takes about an hour with regular shop tools. Leave the factory bracket in place; these subframe braces offer twice the support. Enjoy better handling and a safer ride with a pair of Steeda S550 Ford Mustang rear IRS subframe support braces.
( 10 )
$319.95
These Steeda Autosports Stop the Hop packs are designed to get wheel hop under control. They include Steeda's chromoly steel lower trailing arms and tubular upper third link. The packs will also improve straight line traction and corner exiting, providing quicker quarter-mile times and lower lap times at the road course. Available for stock height or lowered vehicles, Steeda Autosports Stop the Hop packs increase traction without changing ride quality.
( 1 )
$1,249.95
Are you looking for an easy way to adjust your clutch? Steeda's exclusive double hook design adjusters, along with the supplied firewall adjuster and cable, give you many adjustment choices. These Steeda kits are fully adjustable and allow an enthusiast to set the clutch travel to any preference with ease. A must with heavy-duty clutches, they're easy to install and simple to adjust. They come complete with hardware and instructions.
( 45 )
$144.95
—
$147.98
When you push your Cobra to the limit in the corners, you may be applying enough force to twist the differential cover beyond its ability to flex. Repeatedly doing this causes the metal in the differential cover to separate, leaving you stranded. Steeda has come up with a solution to fix this problem. By attaching one of these Steeda differential braces, you will be adding strength and peace of mind to your differential cover. Steeda designed these cover braces with a hole to allow you to access the oil fill plug without having to remove the braces.
Not Yet Reviewed
$188.96
—
$549.95
Steeda S550 Mustang GT 5.0L Coyote 304 stainless resonator delete crossover pipes are the best way to improve sound and increase performance at minimal cost—while losing up to 6.5 lbs. of weight. Available in X-pipe and H-pipe models, the design increases torque at lower RPM and delivers a traditional mean, deep muscle car exhaust tone. The layout enables you to retain the factory heatshield found on 2018 and newer GT models—without cutting and expanding the crossover pipe to retain the OE shields or chiseling off the OE shields. With mandrel-bent 2.5 in. diameter tubing, these crossover pipes easily install between the factory catalytic converters and the factory mufflers. They're also compatible with virtually all aftermarket axle-back exhaust kits. The 304 stainless steel tubing will not develop surface rust typical with 409 stainless, nor rust completely through like aluminized mild steel. The flush-fit exhaust clamps allow for shortening the pipe, if needed, and prevent exhaust leaks common with expanded end kits.
( 13 )
$294.95
—
$299.95
All Steeda clutch cables features a stainless steel inner cable and a low-friction PTFE lining, along with a high-durometer bushing at the firewall for improved clutch response and cable life. Steeda manufactures these cables using the finest stainless steel to ensure performance and durability.
( 12 )
$44.95
—
$69.95
Steeda Ford Mustang subframe bushing support systems will tighten up your muscle car's rear-end for enhanced performance. Crafted from CNC-machined 6061 aluminum, the bushing kits eliminate the rear subframe movement notorious in 2015 and later Mustangs--and allow your car to increase traction to the rear wheels. They're also the first step towards eliminating wheel hop. Install a much more solid feel with Steeda Ford Mustang subframe bushing support systems. Benefits include: * No increase in NVH * Easy-to-install with basic hand tools * No permanent modifications required * Lifetime warranty
( 3 )
$207.84
Make lifting your vehicle a breeze with Steeda Ultra-Lite jacking rails. These lightweight systems are made in-house from sturdy CAD-designed, laser-cut, high-strength steel and feature a durable finish. They're available as weld-in or a simple bolt-in design that can be removed at any time using factory mounting holes. The rails are offered in different lengths to help with your strengthening needs. They allow you to jack up your car with confidence anywhere along the rail, preventing damage—and also function as undercarriage protection if you are riding lowered. The rails add strength and function to your vehicle and make putting your car up on stands quick and easy.
( 25 )
$144.95
—
$284.95
Steeda's CNC-machined billet charge motion plates are superior upgrades for your Mustang. Steeda's charge motion plates are designed for a better port match to the intake manifold and cylinder heads than the original plates, reducing turbulence and improving airflow in the intake path for more horsepower and torque. Beautifully CNC-machined out of 6061-T6 aluminum for superior strength and light weight, Steeda's charge motion plates are available with tapped nitrous fitting holes for custom nitrous applications.
( 5 )
$349.95
Steeda has combined their subframe alignment kit and subframe bushing support system into a money-saving package. These components are useful for a variety of Ford Mustang applications from 2015 and up. Product benefits include: * IRS subframe bushing support system fills in all factory voids in order to eliminate movement of the IRS subframe * Utilizes all 4 factory mounting locations, which completely restricts shifting or rotation * Practically no added weight to the vehicle * Uses precision-machined Delrin® sleeves, which add no NVH and limit vibration to the vehicle * CNC-machined parts for a precision fit, unlike welded and stamped parts with slotted holes * Aligns and holds the subframe in place, in all 4 mounting locations * Easy installation, can be done in under 2 hours * More cost effective than others on the market to control wheel hop
( 2 )
$239.95
Steeda Sport suspension springs are the foundation of good handling! The company's experience in high performance street and racing suspension systems is second to none—put that expertise to work for you. These springs are custom-made to strict specifications for fitment on a wide range of vehicles, including Ford Mustang, Fusion, and Focus; as well as Lincoln and Mercury models. And depending on the springs you order, you can lower your stance by up to 2 in. Steeda uses high-quality steel wire to ensure performance and durability, with a black or blue powdercoat finish to resist the elements. Enhance your ride quality with a set of durable, attractive Sport suspension springs from Steeda!
( 16 )
$267.71
—
$469.95
Steeda Ford Mustang ProFlow cold air intake kits are designed for maximum airflow and horsepower. They're manufactured from quality materials to ensure high performance and durability. An easy-bolt on part for the garage mechanic, these kits are supplied with an air box and built-in race-tested velocity stack, as well as a high-flow nano-fiber filter. They mount in the factory location with the included rubber trim to seal the shield against the hood and fender for lower air temperatures. Dramatic power increases across all rpm ranges have been achieved with these premier units. All necessary hardware and easy-to-follow instructions are furnished. Order the Steeda ProFlow cold air intake engineered for fitment on your specific car—then take your Ford Mustang to the next level of performance! (Note: Some models do require a tune.)
( 8 )
$209.95
—
$719.95
Bump steer is undesirable because the suspension is steering your car instead of you. Correct your bump steer with one of these Steeda bump steer kits. These Steeda bump steer kits feature spherical rod ends with tapered shafts for a hassle-free installation that requires no drilling of the spindle for fit. Steeda manufactures these bump steer kits using the finest materials to ensure performance and durability.
( 22 )
$199.95
—
$239.95
Are you looking for an easy way to adjust your clutch? Steeda's firewall mounted clutch adjusters let you adjust your clutch engagement without having to crawl under the car. Just turn the adjuster knob on the firewall and you're done! Steeda designed these adjusters with a bigger adjustment range and a locking tab to keep the adjuster base from rotating, allowing you to make adjustments with one hand.
( 3 )
$79.95
Stop missing third gear! Steeda's Tri-Ax shifters for the Tremec T5 and T45 transmissions will give you smooth and precise shifts. Steeda manufactures these shifters from CNC-machined billet aluminum to ensure performance and durability. The adjustable positive stops prevent overextending the shift lever, which also prevents costly transmission damage. Additional features include: * Offset-preload coil springs find third gear for you so you won't miss * 2-position adjustable height * Exclusive BootGuard (prevents damage to factory rubber inner boot) * Nickel plated pivot shaft won't rust or stain * Grade 8 and stainless steel hardware
( 17 )
$232.56
Steeda rear sway bars will give you the confidence you need to attack the corners that get in your way. Steeda engineered each bar to give you maximum stability, while controlling your ride's body roll, giving you predictable handling in all situations. Installation is easy and handling is drastically improved. Don't sacrifice handling when you can upgrade your sway bars and be ready for the turns ahead.
( 5 )
$169.95
—
$249.95
Steeda has fielded numerous calls on the rear subframe being misaligned from the factory on the S550 Mustangs. Through hours of research and development, Steeda found that there was a large difference in bolt and hole size, making it possible for the subframe to be misaligned from the factory by up to 1/2 in. left to right. That research and development also lead to a solution--the Steeda subframe alignment kits. These kits are made from CNC-machined Delrin to avoid putting two dissimilar metals next to each other to prevent corrosion. They are designed to slide into the subframe mounting holes to fill the extra space left from the factory. Steeda subframe alignment kits guarantee that your subframe will be bolted to the same location every time it's lowered and eliminate the need for any unnecessary alignments ever again.
( 1 )
$72.71
Steeda offers spherical control arm bushings for dozens of Ford vehicles from 1979 and up. These replacements are available in different styles and are a perfect addition to your racing suspension system. The bushings eliminate binding and allow super high-horsepower applications to retain their "stock type" suspension systems.
( 15 )
$129.95
—
$259.95
Steeda's adjustable rear sway bars work with your stock rear sway bars to dramatically improve handling. Spring-loaded end links let you fine-tune the suspension to fit your driving style. These are parts that will grow with you; change another part of your suspension, and all it takes is a quick turn of a wrench to adjust the handling back to neutral!
( 2 )
$249.95
—
$359.02
If you've lowered your Mustang and are looking to dial in precise suspension settings for track day or daily spirited driving, Steeda has a solution. Factory stock camber arms are made to withstand lots of force, but their bushings are soft which leads to deflection under hard cornering, causing wheel and tire to lean outward and lose camber, resulting in grip reduction and less predictable handling. Steeda rear adjustable camber arms have been perfected through the strength of aerospace grade 6061 aluminum construction and spherical nylon-lined bearings made with specific preloads imparted on the bearings, ensuring the lowest amount of bind on the bearing as possible. The bushing design prevents dirt from penetrating the bearings, ensures rod ends will not to be replaced, and gets rid of deflection so you can maintain proper camber during hard cornering for a more responsive and predictable handling car. Steeda rear camber arms are also adjustable from +2 degrees to -5 degrees camber--more than enough adjustability for any street or race setup.
( 2 )
$639.95
Steeda billet vertical links feature a one-piece design accurate down to one-thousandth of an inch. Their design, along with 6061 aircraft-grade aluminum construction, delivers maximum strength—something welded control arms cannot. Steeda offers the billet links with larger polyurethane bushings, combined with billet steel sleeves and spacers, for more control through jounce and rebound, while still providing plenty of compliance, causing absolutely no suspension bind or an artificial spring rate. They are also available with CNC-machined Delrin® bushings, and billet steel bushing sleeves and spacers. Benefits of Steeda billet vertical links: * Reduces wheel hop * Will not flex under load * No increase in NVH * Installs easily, with basic hand tools * Delrin® bushings are recommended for drag racing and to eliminate wheel hop * Polyurethane bushings are recommended for handling applications (Street, Road Racing, AutoX)
( 2 )
$239.95
You can dial-in more camber with Steeda stainless steel camber plates. You can increase overall cornering capability, eliminate understeer, reduce tire wear, and have a more predictable, balanced vehicle on the street or track. These high-quality, stainless steel plates have Teflon®-lined bearings included, and Grade 10.9 hardware and nylock nuts for a smooth installation. Steeda continually finds ways to improve your suspension. Note: Camber plates do not include caster adjustment.
( 1 )
$363.26
Steeda rear toe links feature over 1 in. of adjustment, making them perfect for street use or race applications to give precise toe alignment for your driving objective. These S550 Mustang adjustable rear toe links (for 2015-17 Mustang GT, EcoBoost, and V6) can improve the handling characteristics and improve your vehicle's overall handling response, making your car feel more connected and balanced, and therefore making it easier to control. Features and benefits of Steeda adjustable rear toe links are: * On-car adjustability * TIG-welded * Powdercoated finish * Perfect for lowered cars * Large degree of toe adjustment, great for aggressive driving * Includes eccentric lock-out plates * Zero increase in NVH * Ideal for road or track
( 1 )
$394.84
Steeda offers Fox Body Mustang front bumper bars that are designed to provide the reinforcement needed for your race Pony cars front end. These direct replacement bumper bars are the perfect replacement for your bulky and heavy OEM front bumper bars. They are lightweight in construction, and feature a bolt-on-design for an easy straightforward installation, no cutting or grinding required. Get your vehicle restoration project done right with these Ford Mustang lightweight race front bumper bars from Steeda.
( 5 )
$144.95
—
$179.95
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
