Availability
SpeedFactory Racing MAP Sensors
SpeedFactory Racing offers high-performance MAP sensors for Honda®/Acura® applications, specializing in 3-bar and 4-bar units designed for boosted engines. These MAP sensors offer accuracy across temperature and altitude ranges, as well as a 0-5 V true linear output for precise tuning, featuring a fast 0.001 second response time. Designed to work with most all aftermarket ECU systems, these units feature OEM-style housings for plug-and-play installation and are available in your choice of color, red or black.
Not Yet Reviewed
$113.70
—
$113.99
SpeedFactory Racing 4-Port Boost Control Solenoids
The SpeedFactory Racing 4-port boost control solenoids allow precise boost control with a pulse width modulation signal from a source (engine control module or electronic boost controller). These 4-port solenoids can raise the boost level as high as 6-7 times the spring pressure of the wastegate and offer very precise control at very high boost levels. They also allow you to use much lower wastegate spring pressures for better boost control when launching and can be used with single or multiple wastegates and they are compatible with almost every electronic boost controller and tuning software.
Not Yet Reviewed
$132.99
SpeedFactory Racing Race Radiator Hose and Fitting Kits
SpeedFactory Racing race radiator hose and fitting kits are aftermarket plumbing packages designed to connect high performance custom or tucked radiators to Honda© and Acura© engines (such as B, D, F, H, K, and J-series). They replace factory rubber hoses with durable -16 AN braided lines and secure, leak-free aluminum fittings for a clean, race-ready engine bay. * Kit contents: -- 5-foot section of -16 AN black braided radiator hose -- Two -16 AN black anodized 45-degree hose end fittings -- One -16 AN black anodized 90-degree fitting -- One -16 AN black anodized straight fitting * Main features: -- Custom routing: Flexible braided lines allow tight, clean routing that clears bulky engine components -- High reliability: Built to withstand extreme race environments and high-pressure/high-heat coolant flow without leaking -- Aesthetic appeal: Gives the engine bay a polished, professional "tucked" look
Not Yet Reviewed
$175.55
SpeedFactory Racing YCP Vitara Piston and Ring Kits
SpeedFactory Racing YCP Vitara piston and ring kits are legendary, cost-effective engine rebuild packages designed for modifying Honda®/Acura® D-Series engines (like the D15 and D16) to handle extreme turbocharger boost and high horsepower. Order the kit recommended for your vehicle. Additional details: * What's in the kit: Each kit comes with four YCP-brand pistons, floating wrist pins, clips, and a complete set of piston rings. * What they do: These kits replace the weaker, stock factory pistons. A piston is a cylindrical engine part that moves up and down inside a cylinder to transfer the force of burning gas to the crankshaft. * Key Features: Made from AC8A-grade aluminum, the pistons are T-6 heat-treated (a baking process that makes metal much harder and stronger) and feature PTFE-coated skirts to reduce friction. * SpeedFactory Racing kits are a budget-friendly tuner favorite because they can safely support builds producing between 300 to 500 hp
Not Yet Reviewed
$159.99
SpeedFactory Racing Throttle Bodies
Engineered for serious performance enthusiasts, SpeedFactory Racing throttle bodies deliver uncompromising airflow, precision, and responsiveness to maximize your engine's potential. Crafted from high-quality materials and designed with advanced CNC machining, these throttle bodies optimize intake efficiency while maintaining smooth drivability, making them ideal for both street and track applications. With larger bore sizes and a performance-focused design, they support increased horsepower and torque gains, especially in high-boost or naturally aspirated builds. Trusted by both racers and builders alike, SpeedFactory's throttle bodies are the perfect upgrade for those seeking superior throttle response, reliability, and race-proven performance.
Not Yet Reviewed
$138.99
SpeedFactory Racing 3-Port Boost Control Solenoids
The SpeedFactory Racing 3-port boost control solenoids allow precise boost control with a PWM (pulse width modulation) signal from a source (Engine Control Module or Electronic Boost Controller). These solenoids can raise the boost level as high as two to three times the spring pressure of the wastegate. They can be used with single or multiple wastegates and are compatible with almost every electronic boost controller and tuning software.
Not Yet Reviewed
$111.99
SpeedFactory Racing Adjustable Cam Gears
SpeedFactory Racing adjustable cam gears deliver precise cam timing control for performance Honda® engine builds. These adjustable cam gears are available for Honda® B-Series, H23, and D-Series engines, with options for pre-drilled, pre-installed magnets, or no magnets for high-RPM accuracy. CNC-machined from 6061-T6 billet aluminum with a black hard-anodized finish, they feature an "EZ-Dial" adjustment system for quicker, more accurate tuning. With a cam timing range of +/- 10 degrees, these adjustable cam gears help fine-tune the power curve with greater precision. The EZ-Dial 6mm hex key adjuster and enlarged timing scale help simplify adjustments and reduce the trial and error often associated with using the cam gear mounting bolt or crank pulley bolt.
Not Yet Reviewed
$124.99
—
$249.99
SpeedFactory Racing 16 V Battery Boxes
The SpeedFactory 16 V battery boxes are designed for passenger or driver's side frame rail mounting and for use with XS Power 16 V AGM lead acid batteries (models XP1000, D1600, and S1600). There are very slight differences in case sizing's between models but all of them will fit your SpeedFactory battery box. The battery boxes are constructed from laser cut and CNC-formed A36 hot-rolled mild steel, and seams are TIG-welded where necessary for added rigidity. Laser-cut "SF" logos are also featured on the battery box and battery hold-down strap. Temporary mounting hole utilizes an existing threaded location in the frame rail (most Honda®/Acura® applications) and pre-cut X-patterned cutouts help facilitate ease of battery box mounting and welding during installation.
Not Yet Reviewed
$172.56
SpeedFactory Racing Exhaust Manifold Stud Kits
Upgrade your engine build with SpeedFactory Racing exhaust manifold stud kits, engineered to deliver superior clamping force, improved sealing, and long-lasting durability compared to factory hardware. Available in premium titanium and high-strength stainless steel configurations, these kits are designed to resist corrosion, eliminate rust-related failures, and withstand extreme exhaust temperatures. Featuring precision-machined studs with integrated hex-key installation tips, along with matching washers and 12-point nuts, SpeedFactory manifold studs provide a secure, professional-grade fastening solution for Honda®, Acura®, Toyota, Mitsubishi, and other performance applications. Whether you're building a street car, race car, or high-boost turbo setup, SpeedFactory stud kits help prevent leaks, stripped threads, and hardware failures while adding a clean, race-inspired finish to your engine bay. Choose the stud kit best suited for your engine requirements.
Not Yet Reviewed
$111.99
—
$198.49
SpeedFactory Racing 4140 Cylinder Head Stud Kits
The SpeedFactory Racing 4140 cylinder head stud kits are designed to provide superior clamping force, preventing cylinder head lift and head gasket failure in high-performance, forced induction (turbo/supercharged) Honda®/Acura® engines. The studs maintain a tight seal on the cylinder head under extreme boost, crucial for preventing combustion gases from escaping. The 4140 steel head studs resist stretching far better than OEM head bolts, essential for high-horsepower reliability. Each kit includes forged nuts and washers designed to distribute clamping loads evenly across the engine block. Select the kit for your application needs. Key features: * 210,000 psi tensile rating * Hex broach on the top of the stud for ease of installation and a dog point design for superior preload * Oversized forged 12-point nuts and hardened parallel ground washers for superior load distribution compared to smaller nuts and washers * Direct drop-in replacement for OEM head bolts * Studs feature a corrosion-resistant black oxide coating
Not Yet Reviewed
$142.99
—
$177.99
SpeedFactory Racing Oil Catch Cans
SpeedFactory Racing's oil catch cans are precision-engineered crankcase ventilation solutions designed to keep high-performance engines cleaner, more efficient, and track-ready under demanding conditions. Built from high-quality billet aluminum and finished for durability, each unit features an optimized internal baffling system that effectively separates oil vapors and contaminants from the PCV system before they can recirculate into the intake. This helps reduce carbon buildup, maintain consistent combustion, and extend engine longevity—especially in boosted or heavily modified applications. Available in multiple configurations to suit a wide range of Honda® and import platforms, the SpeedFactory catch cans combine race-proven functionality with clean, compact design, making them an essential upgrade for enthusiasts seeking improved reliability and performance.
Not Yet Reviewed
$235.40
—
$235.99
SpeedFactory Racing Mega Flow Fuel Rails
SpeedFactory Racing Mega-Flow fuel rails are engineered for high-performance fuel systems, providing smooth, consistent fuel flow to each injector under demanding conditions. Their large-capacity internal bore, precision-machined construction, and black anodized finish help reduce pressure fluctuations while improving durability and corrosion resistance. With OEM-style fitment that works with most intake manifolds and OEM fuel pressure regulators, they offer easy installation and reliable performance for modified street and race vehicles needing increased fuel flow for higher-horsepower builds. Order the model designed for your application needs.
Not Yet Reviewed
$163.99
—
$190.99
SpeedFactory Racing Oil Pan Fasteners
SpeedFactory Racing offers oil pan fasteners for a variety of applications, including hundreds of Honda© and Acura© cars and trucks from 1986 and up. These high performance replacement hardware kits are designed to replace factory steel oil pan bolts and studs. Key features and specifications: * Material: Machined from high-strength, lightweight, and corrosion-resistant Ti-6Al-4V titanium, preventing the rust and degradation common with stock steel hardware * Design: Features an ultralight, hollow-domed 6-point head design (or hex key tip options on studs) with an M6 x 1.0 thread pitch * Finishes: Available in a natural raw titanium finish or a heat-treated burnt titanium finish * Kit contents: Depending on the specific engine series (such as B-, D-, F-, H-, or K-series), kits include a combination of titanium flange bolts, flange nuts, washers, or full stud and nut sets designed to fit steel oil pans (note: most K-series kits are restricted to steel oil pans rather than factory aluminum ones)
Not Yet Reviewed
$111.71
—
$144.63
SpeedFactory Racing High Performance MLS Head Gaskets
SpeedFactory Racing high performance MLSS head gaskets are purpose-built to handle extreme cylinder pressures in high-compression, turbocharged, or nitrous-fed Honda® and Acura® engines. These gaskets have been real-world tested to 1,000+ hp and are designed to compensate for the "head lift" that often occurs in high-output builds. Featuring a multi-layer design, these MLS head gaskets utilize specialized embossments that increase the active combustion sealing height, keeping a tight seal even when the head moves under heavy load. The gaskets are coated with a high-performance elastomer to fill micro-irregularities on the head and block surfaces for a more reliable seal. SpeedFactory also incorporated a unique internal silicone bead on the oiling passages for improved sealing to prevent leaks. Select the high performance MLS head gaskets compatible for your specific engine type.
Not Yet Reviewed
$109.72
—
$109.99
SpeedFactory Racing Titanium Valve Cover Hardware Kits
SpeedFactory Racing's titanium valve cover hardware kits add a unique finishing touch to any engine bay. These kits provide a stylish, lightweight, and corrosion-resistant upgrade for Honda®/Acura® engines, manufactured from high-strength Ti-6AL-4V titanium. Available in raw (natural) or burnt finishes, these kits include precision laser-etched washers and custom, high-heat resistant Viton® or nitrile grommets to ensure superior sealing. Select the titanium valve cover hardware kit designed for your application needs.
Not Yet Reviewed
$111.71
—
$132.66
SpeedFactory Racing Valve Springs
Engineered for serious performance applications, SpeedFactory Racing valve springs are precision-crafted to deliver the control, durability, and high-RPM stability demanded by modern turbocharged and naturally aspirated builds. Designed with premium materials and optimized spring rates, these springs maintain precise valve motion under extreme boost and elevated engine speeds, reducing the risk of valve float while maximizing power potential. Whether paired with aggressive cam profiles or built for endurance under track conditions, SpeedFactory's valve spring lineup offers a range of solutions tailored to street, strip, and full race engines—ensuring consistent performance and long service life to give enthusiasts and professional builders the confidence to push their setups to the limit. Select the valve springs for your application needs.
Not Yet Reviewed
$169.99
SpeedFactory Racing Tucked Radiator Hose Kits
SpeedFactory Racing tucked radiator hose kits are aftermarket plumbing kits used to connect a tucked radiator to a Honda® or Acura® engine (specifically B, D, F, and H-series). They're commonly used in custom engine bay builds to free up space and give a clean, race-ready appearance. * Each kit comes with the following components: -- One 5 ft. section of durable -16 AN black braided radiator hose. -- Four -16 AN black anodized 45-degree hose end fittings. * Key features: -- Custom routing: The braided hose and AN fittings allow for tight, coaxial routing, moving the bulky coolant lines neatly out of the way for a "tucked" engine bay look -- Reliability: Designed to handle the rigors of racing environments while offering trouble-free, leak-free installation
Not Yet Reviewed
$175.55
—
$175.99
SpeedFactory Racing High Compression Pistons
Unlock the full potential of your Honda® B-series build with SpeedFactory's mid/high compression cast pistons, engineered to deliver reliable, all-motor performance gains without sacrificing durability. The pistons are manufactured from high-strength AC9B hypereutectic aluminum alloy, offering exceptional heat resistance, reduced scuffing, and improved wear compared to OEM components, while precision CNC-machined crowns and an enlarged top land enhance strength under demanding conditions. Featuring a low-friction moly skirt coating for smoother operation and tighter piston-to-wall clearances, they promote superior ring seal, increased efficiency, and more usable power across the rev range. Designed to work with both factory and aftermarket rods, these pistons are available in multiple bore sizes with different compression ratios. They are the ideal upgrade for builders looking to maximize horsepower, throttle response, and long-term reliability in naturally aspirated B-series engines. Order pistons for your application.
Not Yet Reviewed
$249.99
SpeedFactory Racing Titanium Valve Spring Retainers
Upgrade your valvetrain with SpeedFactory Racing's titanium valve spring retainers—precision-engineered for strength, durability, and high-RPM performance. CNC-machined from premium-grade titanium, these valve spring retainers significantly reduce valvetrain mass compared to stock components, improving engine response and stability under extreme conditions. Designed for accurate fitment and optimal spring control, they help minimize valve float while maximizing reliability in both street and race applications. Whether you're building a high-performance Honda®, Acura®, or other sport-compact platform, these titanium retainers by SpeedFactory Racing deliver lightweight efficiency and race-proven durability you can trust.
Not Yet Reviewed
$159.99
SpeedFactory Racing LS/VTEC Conversion Oil Filter Adapter Kits
SpeedFactory Racing LS/VTEC conversion oil filter adapter kits provide a high-quality, reliable solution for supplying oil to a VTEC head on a non-VTEC Honda® B-series (B18A/B/B20) block. These comprehensive kits include a CNC-machined black anodized sandwich plate, a high-quality -6AN (PTFE-lined) stainless steel braided oil line, hardened chromoly steel alignment dowels, required fittings, plugs, and a 1/8-inch NPT bottoming tap. They make LS/VTEC conversion safer and more robust, and help to prevent common lubrication issues, especially during high-performance applications.
Not Yet Reviewed
$189.99
SpeedFactory Racing H-Beam Connecting Rods
SpeedFactory Racing H-Beam connecting rods are 100 percent CNC-machined 4340 chromoly steel rods, featuring a 2-piece forging, shot-peened finish, and are heat-treated for superior fatigue resistance, with specific models catering to Honda® B-Series, D-Series, and K-Series engines. These H-Beam connection rods include bronze alloy pin bushings for floating pins, and 220,000 psi rated ARP2000 rod bolts with ARP lube. Select the H-Beam connecting rods designed for your application needs.
Not Yet Reviewed
$118.75
SpeedFactory Racing Coolant Fill Necks
Designed for Honda® and Acura® performance applications, SpeedFactory Racing coolant fill necks provides a simple and effective solution for filling and bleeding aftermarket cooling systems. Manufactured in-house from high-quality aluminum with precision laser-cut flanges, these fill necks relocate the cooling system's highest fill point to improve coolant servicing, eliminate trapped air, and promote consistent engine temperatures. Available for B-Series, LS/B20, D-Series, and H-Series engine platforms in both -16AN and 32mm hose-end configurations, SpeedFactory coolant fill necks are ideal for custom radiator, race, tucked-bay, and swapped vehicle setups, delivering excellent durability, and professional-grade cooling system performance.
Not Yet Reviewed
$180.54
SpeedFactory Racing Titanium Transmission Case Bolts
SpeedFactory Racing titanium transmission case bolts are high-strength, lightweight Ti-6AL-4V fasteners designed to replace stock steel transmission case-half bolts on Honda© and Acura© vehicles (such as B-Series, D-Series, H/F-Series, and K-Series setups). They feature an ultralight, hollow-domed 6-point head design and resist rust or corrosion. Additional details: * Material: Aerospace-grade Ti-6Al-4V titanium for high tensile strength and reduced weight * Design: M8 x 1.25 size with a hollow-domed 6-point head (uses standard 12mm tools) * Corrosion resistance: Will not rust or degrade like factory steel hardware * Finishes: Available in natural raw titanium or a colored burnt finish
Not Yet Reviewed
$116.70
—
$155.60
SpeedFactory Racing RACE Cooling System Fill Pots
SpeedFactory Racing RACE cooling system fill pots are engineered for high-performance Honda®/Acura® racing applications, providing an efficient solution for filling, bleeding, and optimizing custom cooling systems. Compatible with most aftermarket and tucked radiator setups, these precision-fabricated aluminum fill pots relocate the system's highest fill point for quicker air removal, easier maintenance, and improved cooling system performance while increasing coolant capacity by approximately one quart. Each fill pot includes a high-pressure Moroso radiator cap that helps raise coolant boiling points, improve cooling efficiency, and provide added protection against overheating in extreme track conditions. Available in multiple B-Series configurations with either -16AN or 32mm hose connections, SpeedFactory's RACE cooling system fill pots are designed for the track and ready for anything.
Not Yet Reviewed
$240.39
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster