Availability
Build your next project with these forged steel alloy threaded receivers and xAxis sealed flex joints from SPC Performance. Get the increased angularity of a mono-ball that's been equipped with high-misalignment inserts, the reduced compliance of a spherical bearing, and better durability than rubber and urethane bushings with SPC's superior design. The 3-piece assemblies are available in different thread sizes and misalignment angles. Ball joints include sealed dust boots, moly grease, and a highly polished electroless nickel construction. Each assembly utilizes a snap ring for positive retention and easy replacements. Order the size and options recommended for your vehicle.
Not Yet Reviewed
$60.99
—
$105.99
SPC Performance adjustable caster rods can help fine tune your ride's handling performance. Non-adjustable factory rods and their aging bushings cause unwanted movement and poor handling. But, with SPC adjustable rods, you can gain the positive caster needed for improved tracking and modern geometry. Eliminate wandering and weaving at high speeds, put the control back in your hands and enjoy driving a lot more with SPC Performance adjustable caster rods.
( 15 )
$102.99
SPC Performance heavy-duty cam bolts replace your OEM cam bolts and allow for individual caster and/or camber adjustment. Available for passenger cars, 2WD and 4WD trucks, and SUVs, these SPC Performance heavy-duty cam bolts are sure to get your front-end alignment problems fixed.
( 21 )
$51.99
—
$102.99
SPC camber/caster bolt kits replace your non-adjustable or corroded bolts. These kits provide more adjustment to achieve the proper alignment for your application. Do you have negative camber/caster problems? Think positive! Achieve proper alignment on your vehicle with SPC camber/caster bolt kits.
( 21 )
$52.99
—
$104.99
SPC performance control arm hardware is designed to work perfectly with SPC control arm components. These super-tough components are available in a variety of configurations to fit your needs.
( 5 )
$98.99
Is your vehicle in need of an alignment? We have you covered with these SPC Performance adjustable control arm bushings. The bushings feature a special offset design that allows you to adjust the camber on your vehicle. They include OEM-style rubber outer bushings, so your ride quality and handling performance remain the same.
( 4 )
$84.99
—
$97.99
Designed to replace many OE-style bushings, SPC Performance xAxis sealed flex joints retain chassis design parameters. They're recommended for use as a replacement where higher performance of joint angularity is desired—and are perfect for race and off-road builders. xAxis sealed flex joints feature: * Sealed joint retains grease and keeps out contaminants * Highly polished electro-less nickel finish maximizes durability * Up to 45 degree angularity for high misalignment requirements * Common sizes that builders and racers need
Not Yet Reviewed
$50.99
—
$75.99
SPC Performance FasTrax toe adapter kits are designed for use with the FasTrax caster/camber gauge from SPC. They include two arms and reinforcement blocks that make installation easy. Simply lower toe arms and insert a tape measure into the slot, and then measure to the opposite tire reference point for accurate and fast toe readings.
( 13 )
$66.99
These patented SPC Performance thrust alignment plate kits allow for corrections of the setback and thrust angle on most vehicles equipped with leaf springs. They install easily--just loosen up the U-bolt holding the leaf springs to the axle, install the alignment plates, and re-tighten. By including multiple sizes, the SPC Performance thrust alignment plate kits are sure to solve your problem.
( 7 )
$54.99
—
$111.99
SPC Performance lower control arm camber kits dial-in your alignment. They offer quick and accurate results and, even with the suspension loaded, these kits make changes of up to +/-1.5 degree camber/caster fast and easy. The tools are effective on hundreds of Dodge and Jeep applications from the 2000s and up.
Not Yet Reviewed
$81.99
Keep your alignment working like new with SPC Performance standard series ball joints. Made from top-quality materials, they are available for a variety of applications to help keep your ride's alignment as it was when it rolled off the showroom floor.
( 3 )
$87.99
—
$117.99
These SPC Performance magnetic adjustable camber gauges have a simple level adjustment of +/- 3 degrees. They feature an aluminum housing with a built-in magnetic head that attaches firmly to disc brake rotors or spindles. SPC Performance magnetic adjustable camber gauges measure the amount of camber to help repair or return a strut to its original location.
( 2 )
$72.99
Is it time for a 4-wheel alignment? If so, then you will probably need one of these SPC Performance camber shims to achieve the proper alignment. They are made of high-quality materials and are designed to be installed with no modifications. Front and rear-wheel alignment directly impacts tire tread wear. SPC Performance camber shims are available in different styles and thicknesses, so we are sure to have one to correct your alignment problems.
( 8 )
$52.99
—
$114.99
These SPC Performance offset ball joints are designed to replace the factory ball joint and provide for independent caster and/or camber adjustments. They are available in different degrees so that you can correctly align your front-end. These SPC Performance offset ball joints include an installation template so that you can make accurate changes to your sport utility vehicle, passenger car, or pickup truck.
( 7 )
$85.99
—
$102.99
Proper toe settings aid in directional stability and proper tire wear. These SPC Performance wheel toe bar tools will eliminate vehicle wandering and uneven tire wear. They feature an aluminum bar that uses sliding adjusters with pointers to correctly measure the vehicle's toe. SPC Performance wheel toe bar tools are available with a scribe assembly that is designed for marking a specific area for exacting measurements.
( 6 )
$94.99
—
$109.99
SPC performance control arm ball joint plates are designed to work perfectly with SPC control arm components. These control arm plates are available in a variety of configurations to fit your needs.
( 2 )
$63.99
—
$94.99
SPC Performance 4-way ball joint separators are all you need for easier ball joint removal. These tools have a unique design that allows them to be adjusted to remove ball joints of various heights--no need for multiple tools. A job that previously was a hassle is now affordable and easy with strong SPC Performance 4-way ball joint separators.
( 5 )
$79.99
Even out your tire tread wear with these SPC Performance camber tools. They are designed to easily adjust the camber on your vehicle. The tools are application-specific, so you can be sure that they will work on your vehicle. Make fast, easy, accurate camber changes with one of these SPC Performance camber tools.
( 3 )
$72.99
—
$93.99
These SPC Performance pinion angle shims are designed to change the angle of your rear differential in relation to your suspension. They are manufactured from high-quality HD zinc alloy, aluminum, or manganese bronze, so they are strong enough for 2WD and 4WD trucks and SUVs. Available for different width leaf springs and degree corrections, the SPC Performance pinion angle shims will get your driveshaft alignment back to normal.
( 14 )
$50.99
—
$119.99
These SPC Performance internal coil spring compressors can fit inside of most coil springs with an internally mounted shock. They can accommodate springs from 8 1/4 in. to 14 in. total length and 3 3/8 in. to 5 5/8 in. inside diameter. Save time and money with one of these SPC Performance internal coil spring compressors.
( 18 )
$89.99
SPC Performance ball joints are quality replacements for worn ball joints on your control arms. The ball joints are offered in a variety of configurations, and will work perfectly with SPC Performance control arm components. Order the SPC Performance ball joint suited to fit your application needs.
( 19 )
$52.99
—
$117.99
SPC performance control arm cross shafts are designed to work perfectly with SPC control arm components. These control arm cross shafts are available in a variety of lengths and in your choice of aluminum or steel construction.
( 3 )
$94.99
—
$97.99
These SPC Performance wheel centering sleeves are designed to thread on the wheel studs of your heavy-duty truck. They are also designed to decrease tire vibration, reduce tire cupping, cut re-balancing costs, improve fuel mileage, and improve tire life. The sleeves are manufactured from durable steel and then zinc plated to resist corrosion. Make your ride smoother, quieter, safer, and more efficient with these SPC Performance wheel centering sleeves.
Not Yet Reviewed
$54.99
—
$113.99
SPC Performance steering wheel holders are a must for proper alignments. The tools are designed to securely hold the steering wheel and its covered hooks and base, to prevent damage to the steering wheel or seat. The tools are made of quality materials and are designed to be used according to the directions packaged with this product. For automotive equipment solutions, choose SPC Performance.
Not Yet Reviewed
$69.99
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
