Availability
Sonnax automatic transmission case bushings are made to locate the carrier output shaft assembly. These bushings are a direct OE replacement. Sonnax automatic transmission case bushings are made from high-quality materials and is a required part in any high-quality rebuild.
( 14 )
$58.94
Sonnax Super-Hold servo kits offer increased apply area over the OEM servo for more holding force between shifts. They are manufactured from anodized aluminum and include mounting seals and hardware for your specific transmission model. Their improved seal design will conserve pump volume.
( 25 )
$91.85
No one knows transmissions like Sonnax, which is why their primary and secondary pressure sensors work exactly like your OEM parts. Gearbox pressure sensors determine the hydraulic oil pressure in various applications and help to specify the shifting pressure more accurately. This type of sensor may fail to function under hostile conditions or simply wear over time. When that happens, help keep your drivetrain running optimally with the Sonnax primary and secondary pressure sensors designed for your application.
( 2 )
$93.90
Sonnax heavy-duty intermediate overrun clutch outer races eliminate weak points. Race failure is a chronic problem with high-torque loads causing race fractures at two stress points: the radial lube holes and the sharp inside corners at the base of the outer splines. Sonnax outer races are engineered with offset lube holes so rollers never travel directly over the holes, and they are spaced so only one roller is ever positioned near a hole, radically reducing the risk of fracture. Other design improvements to the splines, plus upgraded material and a custom manufacturing process, further improve durability, doubling the torque capacity over any OE or other aftermarket races. Sonnax heavy-duty intermediate overrun clutch outer races are direct replacements offering unrivaled reliability at any power level.
( 3 )
$101.10
These Sonnax billet forward clutch pistons improve forward clutch piston strength and durability by using billet aluminum—and they're made with additional contours at points of high stress. These rebuild components can be used individually or with Sonnax input housing reinforcement sleeve kits. No alterations or fabrication is needed to use them in conjunction with aluminum overrun pistons. Sonnax billet forward clutch pistons can be used in both early and late model automatic transmissions, as noted in the application.
( 1 )
$96.28
Sonnax flanged yokes will complete your driveshaft connection. These high performance 6061-T6 aluminum parts are precision-machined to be stronger than the original cast steel yokes, as well as being lighter in weight. Sonnax builds these yokes for exceptional balance and superior craftsmanship, for a show-quality driveline.
( 22 )
$83.48
—
$101.42
The OE pressure regulator valve design prevents adequate cooler flow at low rpm and high-pressure conditions, which can create overheating. Additionally, in 1999 and later vehicles, the factory EPC pressure was set high at idle, resulting in engine surge conditions in GM 4L80-E and 4L85-E units. Sonnax lube-regulated pressure regulator valves provide a significant increase in cooler flow under low rpm and high-pressure conditions that benefits all vehicles—and eliminates the need for reprogramming 1999 and later vehicles with high EPC pressure at idle.
( 20 )
$63.92
—
$84.84
Sonnax output shaft supports are high-strength replacements for the stock Powerglide output shaft support. They are made from high-strength 6061-T6 billet aluminum to ensure rigidity where it is needed most. The supports are purposely built for racing, eliminating the provisions for the governor. A high-quality pre-installed roller bearing keeps friction losses to a minimum, while the billet aluminum construction lowers the weight dramatically. The Sonnax output shaft supports can be used with both long and short OEM and aftermarket tailshaft housings to allow for use in almost any drag racing application. They feature a true bolt-on installation for the popular Powerglide transmission and can benefit both bracket ET and professional drag racers.
( 2 )
$92.47
Sonnax stator support shafts provide added strength and solid support to the torque converter stator. They are manufactured from high-quality, heat-treated alloy steel--and the roller burnish finish in the seal bore improves sealing for better pressure. The spline and knurl areas have been selectively induction-hardened to resist wear; a pronounced knurl enables more positive press fit. The Sonnax stator support shafts are specially-designed for severe-duty race applications.
( 2 )
$56.38
—
$60.45
Sonnax cooler line repair kits allow case salvage without transmission removal. A common complaint in late-model Chrysler rear-wheel-drive units is a cracked and/or leaking case caused by installing the cooler lines. The tapered threads and the lack of a stop on the OE cooler line fitting can load the case and create a fracture, resulting in leakage that may require replacing the case. Sonnax kits feature adapters that seal on the leading edge, preventing fluid from reaching the fitting threads and crack. The fittings have straight, not tapered threads, to prevent the crack from spreading. A special tap tool for case threads is also included in the cooler line repair kits.
( 7 )
$93.88
GM 6L80 and 6L90 transmissions often suffer failure of the 4-5-6 clutch assembly due to flexing and bowing of the backing plate (coning)—especially when your clutch-apply pressures exceed OE specifications. Sonnax clutch backing plates are designed to minimize flexing/bowing when the clutch is applied, drastically reducing the likelihood of clutch plate distortion. Their stiffer backing plate design outperforms OE and aftermarket plates.
( 8 )
$50.44
—
$65.81
Sonnax Zip kits are engineered to cure common problems associated with today's automatic transmissions. Sonnax Zip kits eliminate: * Burnt clutches * Line pressure instability * Loss of fuel economy * No line rise * Pressure loss * Shift concerns * TCC apply and release concerns * TCC codes * Pressure switch codes
( 9 )
$99.59
Sonnax Line pressure booster kits allow you to shift aggressively and then feel the tranny grab the clutches with more power when it changes gear. The larger boost valves and matching regulator springs raise line pressure progressively as higher pressure is commanded. These kits modify the sensor signal, which causes the computer to create a pressure increase. They're installed between the pressure sensor and vehicle harness using OE-style sealed connectors; no modifications are needed to the transmission.
( 14 )
$82.70
Maintaining your transmission can save you from costly replacement bills. Sonnax automatic transmission replacement servo pistons feature a dual-seal design and can be used with one or two PTFE or OEM-style cast seals. Accompanying replacement components are also available from Sonnax.
Not Yet Reviewed
$62.58
Sonnax high-capacity 3-5-R apply rings for GM 6L80 units are slightly shorter than the original equipment apply ring. When the Sonnax apply ring is installed, the original equipment waved plate can be eliminated, allowing for one additional friction and steel plate to be installed increasing the 3-5-R clutch capacity by 25 percent. The extra clutch and steel also help to dissipate heat and increases the durability and longevity of the 3-5-R clutch pack in high-performance applications.
Not Yet Reviewed
$73.32
Sonnax pressure switch rebuild kits can help salvage your transmission electro-hydraulic control module (TEHCM), restore normal switch operation, eliminate codes, and provide renewed shift performance in all ranges. Some GM transmissions send various trouble codes related to internal fluid pressure failures to your TEHCM. These codes may be accompanied by torque converter clutch (TCC) apply problems or shift irregularities such as slipping, flares, harsh application, and bind-ups. Often, the cause is laminated portions of unobtainable OE pressure switches breaching, preventing normal switch operation. Avoid multiple breakdowns that can trigger failsafe mode and TEHCM replacement by ordering the Sonnax pressure switch rebuild kit recommended for your GM transmission.
Not Yet Reviewed
$94.90
Vehicles with a GM 8L45 or 8L90 automatic transmission may exhibit high or low line pressure that results in harsh/soft shifts, burnt clutches, loss of cooler and lube flow, and overheating of the transmission and converter. These problems may be caused by wear of the pressure regulator bore casting at the VFS signal port area and/or at the shuttle valve sleeve. Wear at the inboard port of the pressure regulator bore allows VFS (throttle) signal pressure to leak, preventing proper action of the pressure regulator valve and potentially allowing it to remain in the low line pressure position. Wear of the shuttle sleeve due to continuous oscillation of the shuttle valve creates a path for balance line pressure at the pressure regulator valve to exhaust, resulting in excessive low line pressure. Sonnax drop-in pressure regulator and shuttle valve kits restore hydraulic integrity to the lineup by addressing wear that subjects the transmission to either excessively high or low line pressure with upgraded materials and unique designs. The pressure regulator valve has been designed with a lengthened spring pocket spool at the VFS signal port area, which provides over double the sealing capability to this critical end of the valve and allows it to operate in unworn portions of the bore. The length of the critical shuttle valve diameter has been significantly lengthened to provide better sealing and durability of the assembly. Additional details: * Hardcoat anodized aluminum valves and highly wear-resistant billet aluminum sleeve combat premature wear * Pressure regulator valve VFS signal spool 200 percent longer than OE and operates in unworn area of the bore * Critical shuttle valve spool made 30 percent longer than OE for added sealing and durability * Drop-in Zip Valve parts install quickly and easily Kit contents: * Pressure regulator valve * Spring * Shuttle valve * Shuttle sleeve
Not Yet Reviewed
$65.06
Sonnax thrust bearings are replacements for your worn automatic transmission bearings to aid in smooth operation and noise reduction. The bearings act as a guide to help limit any axial movement which can hinder performance. Manufactured to exceed OE specifications for superior quality even under extreme conditions, order the Sonnax thrust bearings best suited for your application.
( 4 )
$67.51
Hold your cable in place using Sonnax throttle cable brackets. They are designed to mount to the base of the carburetor using the existing stud or bolt. Made from steel and then gold iridited for protection, these brackets will also accept a transmission kickdown cable and return spring.
( 9 )
$64.40
If you're looking for an easy upgrade to your automatic transmission, Sonnax Servo piston kits may be the answer. The improvement in shift quality is an immediate and noticeable value. These direct replacement kits will help to eliminate a bit of a "sloppy" gear performance caused by faulty OEM servo units. With all necessary rings and seals to prevent leakage and handle higher pressure, Sonnax servo pistons can be your link to greater band apply force. Choose the kit that matches your vehicle specs, then expect faster and firmer shifts!
( 30 )
$67.62
—
$78.01
These Sonnax 2nd Gear Corvette ratio servo kits provide increased apply area resulting in improved holding power for firmer 1-2 and 3-4 shifts in 4L60 (700-R4) and 4L60-E transmissions. The servo piston features D-rings in place of the OE seal rings for improved sealing during apply and release. They are compatible with Sonnax 4th Gear Super Hold dual servo kits. Sonnax 2nd Gear Corvette ratio servo kits include: * Piston * 2 Piston D-Rings * Housing * Housing O-Ring
( 2 )
$57.53
Sonnax accumulator sleeve kits allow transmission cases to be salvaged. Worn or scored accumulator bores in the case can cause a laundry list of problems, from slipping shifts to a destroyed case. Sonnax sleeve kits are simple drop-in solutions that require no machining to the transmission case. Kits are available for different applications and include sleeve(s), piston, PTFE seals, and/or O-rings.
( 5 )
$88.42
Continuous oscillation in relay valve and sequence valve bore causes wear that prevents proper hydraulic control. You can recover hydraulic control and renew 2nd and 4th gear operation by reconditioning the entire bore and installing a Sonnax oversized 4-3 sequence valve kit. These kits address wear on the inboard two spools that is increasingly more common in aging valve bodies. Wearing at these spools can allow valuable 4th servo feed leakage, resulting in no 4th and 2-4 band wear, and can also allow leakage of 2nd clutch oil needed to apply the 2-4 band in 2nd gear, resulting in poor 2nd gear shifts. Leaking at the OE end plug also allows oil loss that can leave 4th gear inoperable. Sonnax oversized 4-3 sequence valve kits feature hardcoat anodized aluminum valves to combat premature wear and O-ringed end plugs to help prevent 4th gear oil loss. Kit contents: * 3-4 relay valve * 4-3 sequence valve * Spring * End plug * Two O-rings (1 extra)
Not Yet Reviewed
$51.20
Sonnax valve body separator plates are offered for several applications. The OE-quality plates incorporate a black silicon sealant bead to bond upper and lower valve body sections together, once rebuild is complete. Note: Sonnax plates are not specific by transmission model, but rather by valve body code and the stamped number. Please verify OE valve body code and number stamped on original plate to order correct ZF8 or Chrysler 845RE plate.
Not Yet Reviewed
$50.08
—
$52.16
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
