Filters
Snow Performance water-methanol injection systems cool the intake charge and combustion while acting as a high-octane fuel source. It’s another great way to boost...
Snow Performance water-methanol injection systems cool the intake charge and combustion while acting as a high-octane fuel source. It’s another great way to boost your horsepower. Shop Summit Racing now for Snow Performance stage 1, 2 and 3 water and methanol injection systems, gasoline and diesel boost cooler kits, dual nozzle upgrade kits, variable boost controllers, reservoir upgrades, replacement water injection pumps, electronic solenoids, boost juice, and more. Explore all of the ways Snow Performance can add speed and power to your life at Summit Racing!
Snow Performance water-methanol injection systems cool the intake charge and combustion while acting as a high-octane fuel source. It’s another great way to boost your horsepower. Shop Summit Racing now for Snow Performance stage 1, 2 and 3 water and methanol injection systems, gasoline and diesel boost cooler kits, dual nozzle upgrade kits, variable boost controllers, reservoir upgrades, replacement water injection pumps, electronic solenoids, boost juice, and more. Explore all of the ways Snow Performance can add speed and power to your life at Summit Racing!
Snow Performance has responded to the increasing demand for methanol with the introduction of Boost Juice, a standardized mix of 49 percent methanol and 51 percent water. This mix has proven to be ideal for detonation control, without being classified as a flammable. Another plus is that this concentration is relatively non-corrosive—it can get on your paint without causing problems. Boost Juice is also certified to include exactly 49 percent methanol, very important when tuning for maximum power—and it's premixed, so no handling is needed once you get it. In diesel engines, this water/methanol mix delivers power increases and cooler exhaust gas temperatures for safer towing and power. Add some power to your diesel engine, while maintaining safe exhaust gas temperatures, with Snow Performance Boost Juice.
( 166 )
$49.47
In gasoline engines, as with any intercooler, Stage-1 Boost Coolers suppress detonation, so more power-producing boost and timing can be utilized. Water, with its high latent heat of vaporization, cools the intake charge and combustion. Methanol cools the charge and combustion, but also acts like an extremely high-octane fuel (some researchers claim as high as 120 octane) and adds more oxygen to combustion. These systems contain everything needed to start making big hp! They're designed for use in gasoline (6-15 psig boost) supercharged/turbocharged vehicles. Systems include: * 300 psi high-volume pump * Adjustable boost pressure switch * 3 qt. reservoir * Two nozzles sized to your FWHP and boost levels * Bosch relay and all the electrical parts * Fittings, tubing, etc. for installation
( 13 )
$375.00
—
$726.57
Snow Performance Boost Cooler Stage-2.5 water/methanol injection systems suppress detonation so that more power-producing timing can be utilized. Water, with its high latent heat of vaporization, cools the intake charge and combustion. Methanol cools the charge and combustion, but also acts like an extremely high-octane fuel (some researchers claim as high as 120 octane) and adds more oxygen to combustion. Complete with custom water-methanol injection throttle body spacer plate, braided stainless line, and 4AN fittings offering un-surpassed reliability and ease of install. They're designed for use in naturally aspirated carbureted gasoline vehicles.
( 8 )
$560.40
—
$937.51
Snow Performance stage 2.5 forced induction progressive water/methanol injection kits provide increased performance with or without nitrous. Water methanol injection cools your incoming air charge and increases the total octane effect of pump gas. This allows you to run increased timing, which results in increased power and torque. When used with nitrous, the need for timing retard is greatly reduced or eliminated, and boosted applications especially benefit from reduced intake temperatures. The system includes everything needed for the installation. Order the model for your application.
( 2 )
$583.34
—
$937.51
These Snow Performance replacement water injection pumps are designed to keep your water injection system operating safely and efficiently. Whether you're replacing a pump or you need to upgrade to a bigger one, the Snow Performance replacement water injection pumps provide reliable delivery for your water injection system.
( 4 )
$176.70
—
$204.09
Snow Performance VC-50 water/methanol injection controllers progressively command injection between two boost points--start and full. Adjustable between 1 to 50 psi, the controllers will begin injection at the starting point set and progressively increase injection volume with boost until it reaches the max injection point set. They come with heads-up boost gauge/water-methanol controller display. Manage the performance of your forced induction application with Snow Performance VC-50 water/methanol injection controllers.
( 2 )
$312.49
Snow Performance 300 UHO water methanol injection pumps offer unsurpassed pressure, technology, and reliability. All 300 Ultra-High Output psi pumps are individually tested to ensure quality and reliability. Features: * Dual EPDM seals offer greater psi ratings to be achieved--safer and longer * Proprietary internal wiring offers lower amperage draw than similar looking models * Built-in thermal breaker allows pump to run constantly without damaging pump internals
Not Yet Reviewed
$204.09
These Snow Performance water injection nozzles feature a unique design that provides the best possible atomization. They have integrated 100-micron filters, so they will keep larger particles out of the system. Available in a variety of flow rates, these Snow Performance water injection nozzles can support a wide range of engines from 150-1,500 hp.
( 22 )
$31.23
—
$31.24
These reservoirs from Snow Performance are perfect for trunk or remote mounting. They come with rubber insulators, quick connect fittings, and extra tubing. They're a must for road racing applications or where high duty cycle/horsepower mandates higher volume on board.
( 4 )
$58.13
—
$364.50
Snow Performance check valves are high-flow inline water methanol valves that offer superior safety and flow compared to other water methanol check valves on the market. They are custom-made with 100 percent methanol-resistant stainless steel springs and EPDM seals, ensuring zero corrosion even with high concentrations of methanol. The aluminum valves are available in different sizes and finishes—even in quick-connect models.
( 2 )
$31.24
Snow Performance Boost Cooler MPG-MAX diesel water/methanol injection systems feature special mapping and the most sophisticated 2-D digital controller available for 1 to 3 mpg increases. They use a new injection management controller that allows for a small, steady spray of water/methanol to be injected across the entire power curve. By improving combustion efficiency, they provide more power and use less diesel fuel. They also now feature a brighter LCD screen that displays boost, EGTs, and injection pump output. The Snow Performance Boost Cooler MPG-MAX diesel water/methanol injection systems include flow-control solenoids, a 300 psi pump, high-pressure tubing, a wiring harness, wire looms, and a optional large 7-gallon reservoir in some kits. Available for Dodge, Ford, or GM, the Snow Performance Boost Cooler MPG-MAX diesel water/methanol injection systems are proven to increase fuel economy, lower exhaust gas temperatures, and increase horsepower.
( 4 )
$1,041.68
Snow Performance offers direct port hardline upgrade kits to directly mount a nozzle into each cylinder—perfect for those running high-horsepower applications that depend on the water-methanol for tuning. Each kit comes with a distribution block, high-flow solenoid upgrade, and all plumbing to install a nozzle in each cylinder. Select the kit for your application needs.
Not Yet Reviewed
$309.24
—
$371.09
Snow Performance electronic solenoids are designed for use with the Snow carburetor plate nozzle adapter. They include a wiring harness, a plastic solenoid with 1/8 in. NPT female threaded attachments, and necessary fittings. The solenoids should be mounted after the throttle plate to keep from siphoning at idle, or if the nozzle must be mounted lower than the reservoir to keep from gravity feeding.
( 11 )
$73.00
Snow Performance Boost Cooler Stage-2 progressive water/methanol injection systems can unlock 50 to 70+ hp on your boosted vehicle, while decreasing your air temperatures by up to 100 degrees. You can increase your pump gas octane by 25 points and make more power, more efficiently, with a cooler running engine. These kits are compatible with all forced induction applications and feature a progressive controller with built-in MAP sensor that proportionally injects more or less water/methanol according to boost pressure. The controllers have adjustable start and stop points for engagement and delivery curves to match what the engine requires.
( 2 )
$625.00
—
$4,472.83
Snow Performance offers all of the spare parts that you may need for use with your Snow Performance Boost Cooler kits. These boost switches are constructed from steel and plastic and have a natural finish.
( 6 )
$36.44
Snow Performance offers wide range of fittings that are ideal for plumbing your water/methanol systems. These quality fittings are offered in different sizes, styles, and finishes to deliver reliability, smooth flow and ease of installation. Order the fitting that is best suited to your application needs.
( 3 )
$5.49
—
$17.12
Snow Performance VC-30 progressive controllers proportionally inject more or less water/methanol according to boost pressure. Doing this gives an accurate delivery allowing cooling and performance improvements over a wide range for improved drivability and cooling benefits. The VC-30 controllers include a digital display and manifold absolute pressure sensor, and the start and full points are adjustable for engagement and the delivery curve to match what your engine requires. Snow Performance VC-30 progressive controllers are especially helpful for direct-injected engines to remove 100 percent of carbon build-up on the valves, and is recommend for all street/strip driven gas forced induction vehicles using a turbo or centrifugal supercharger looking for cooling over a wide range.
( 3 )
$184.31
Snow Performance water methanol filters are designed to be placed on the inlet or vacuum side of the pump. The 100 micron replacement models help prevent debris from entering the pump without restricting the flow of methanol.
( 1 )
$61.84
Snow Performance nozzle holder elbows give you the option to mount your water/methanol nozzles at a 90 degree angle. These fittings are ideal if you're adding nozzles to your current system or just rerouting what you have. For water/methanol injection system replacement parts, Snow Performance will keep you connected.
Not Yet Reviewed
$8.65
Are you tired of checking the fluid in your boost cooler reservoir? We have the solution. These Snow Performance low-level indicator kits include a float switch and an indicator light that lets you know when your reservoir is running low on fluid. They are simple to install and can be used on any Snow Performance reservoir. No need to worry anymore about the level of fluid in your reservoir--the Snow Performance low level indicator kits will keep you running at optimum power and reliability, mile after mile.
( 1 )
$20.82
These Snow Performance water injection system nozzle adapters are designed to help mount the nozzle in a plastic or rubber air inlet tube. They are manufactured from durable plastic and have a threaded hole to install the Snow Performance nozzle into.
( 12 )
$19.83
—
$123.69
This Snow Performance replacement water injection system tubing will gave you room to mount your reservoir wherever you need to. It is constructed from high-quality plastic and features a distinct red finish that is easy to find in any engine compartment.
( 3 )
$5.99
—
$20.82
Snow Performance dual nozzle upgrade kits allow you to add an additional nozzle to be mounted in any Snow Performance Boost Cooler kit. They include a tee splitter, a junction piece with quick-connect fittings, a nozzle holder, and a section of hose. The Snow Performance dual nozzle upgrade kits are perfect for applications that need more flow than one nozzle can provide, or to get even distribution for a dual plenum/throttle body/carburetor setup.
( 9 )
$41.66
—
$312.50
In gasoline engines, as with any intercooler, Snow Performance Boost Cooler Stage-2 water/methanol injection systems suppress detonation so that more power-producing timing can be utilized. Water, with its high latent heat of vaporization, cools the intake charge and combustion. Methanol cools the charge and combustion, but also acts like an extremely high-octane fuel (some researchers claim as high as 120 octane) and adds more oxygen to combustion. These systems contain everything needed to start making big horsepower! They're designed for use in naturally aspirated carbureted gasoline vehicles.
( 9 )
$520.83
—
$937.51
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
