Snow Performance Stage 1, 2 & 3 Water/Methanol Injection Systems

Snow Performance water-methanol injection systems cool the intake charge and combustion while acting as a high-octane fuel source. It’s another great way to boost...

Snow Performance water-methanol injection systems cool the intake charge and combustion while acting as a high-octane fuel source. It’s another great way to boost your horsepower. Shop Summit Racing now for Snow Performance stage 1, 2 and 3 water and methanol injection systems, gasoline and diesel boost cooler kits, dual nozzle upgrade kits, variable boost controllers, reservoir upgrades, replacement water injection pumps, electronic solenoids, boost juice, and more. Explore all of the ways Snow Performance can add speed and power to your life at Summit Racing!

Showing In Stock Items. Show All 65 Items.

Individual Parts

Part Groups

Results 1 - 24 of 57

Manufacturer Rebate

Snow Performance Boost Juice

Snow Performance has responded to the increasing demand for methanol with the introduction of Boost Juice, a standardized mix of 49 percent methanol and 51 percent water. This mix has proven to be ideal for detonation control, without being classified as a flammable. Another plus is that this concentration is relatively non-corrosive—it can get on your paint without causing problems. Boost Juice is also certified to include exactly 49 percent methanol, very important when tuning for maximum power—and it's premixed, so no handling is needed once you get it. In diesel engines, this water/methanol mix delivers power increases and cooler exhaust gas temperatures for safer towing and power. Add some power to your diesel engine, while maintaining safe exhaust gas temperatures, with Snow Performance Boost Juice.

4.83 out of 5 stars ( 173 )

$49.47

Manufacturer Rebate

Snow Performance Stage 2.5 Forced Induction Progressive Water/Methanol Injection Kits

Snow Performance stage 2.5 forced induction progressive water/methanol injection kits provide increased performance with or without nitrous. Water methanol injection cools your incoming air charge and increases the total octane effect of pump gas. This allows you to run increased timing, which results in increased power and torque. When used with nitrous, the need for timing retard is greatly reduced or eliminated, and boosted applications especially benefit from reduced intake temperatures. The system includes everything needed for the installation. Order the model for your application.

4.33 out of 5 stars ( 3 )

$583.34

—

$937.99

Manufacturer Rebate

Snow Performance Boost Cooler Stage-2.5 Water/Methanol Injection Systems

Snow Performance Boost Cooler Stage-2.5 water/methanol injection systems suppress detonation so that more power-producing timing can be utilized. Water, with its high latent heat of vaporization, cools the intake charge and combustion. Methanol cools the charge and combustion, but also acts like an extremely high-octane fuel (some researchers claim as high as 120 octane) and adds more oxygen to combustion. Complete with custom water-methanol injection throttle body spacer plate, braided stainless line, and 4AN fittings offering un-surpassed reliability and ease of install. They're designed for use in naturally aspirated carbureted gasoline vehicles.

4.75 out of 5 stars ( 8 )

$583.99

—

$937.99

Manufacturer Rebate

Snow Performance 300 UHO Water Methanol Pumps

Snow Performance 300 UHO water methanol injection pumps offer unsurpassed pressure, technology, and reliability. All 300 Ultra-High Output psi pumps are individually tested to ensure quality and reliability. Features: * Dual EPDM seals offer greater psi ratings to be achieved--safer and longer * Proprietary internal wiring offers lower amperage draw than similar looking models * Built-in thermal breaker allows pump to run constantly without damaging pump internals

Not Yet Reviewed

$204.09

Manufacturer Rebate

Snow Performance VC-50 Water/Methanol Injection Controllers

Snow Performance VC-50 water/methanol injection controllers progressively command injection between two boost points--start and full. Adjustable between 1 to 50 psi, the controllers will begin injection at the starting point set and progressively increase injection volume with boost until it reaches the max injection point set. They come with heads-up boost gauge/water-methanol controller display. Manage the performance of your forced induction application with Snow Performance VC-50 water/methanol injection controllers.

3.0 out of 5 stars ( 2 )

$312.99

Manufacturer Rebate

Snow Performance Boost Cooler Stage-2 Water/Methanol Injection Systems

In gasoline engines, as with any intercooler, Snow Performance Boost Cooler Stage-2 water/methanol injection systems suppress detonation so that more power-producing timing can be utilized. Water, with its high latent heat of vaporization, cools the intake charge and combustion. Methanol cools the charge and combustion, but also acts like an extremely high-octane fuel (some researchers claim as high as 120 octane) and adds more oxygen to combustion. These systems contain everything needed to start making big horsepower! They're designed for use in naturally aspirated carbureted gasoline vehicles.

4.0 out of 5 stars ( 9 )

$520.83

—

$937.99

Manufacturer Rebate

Snow Performance Replacement Water Injection Pumps

These Snow Performance replacement water injection pumps are designed to keep your water injection system operating safely and efficiently. Whether you're replacing a pump or you need to upgrade to a bigger one, the Snow Performance replacement water injection pumps provide reliable delivery for your water injection system.

3.25 out of 5 stars ( 4 )

$204.99

Manufacturer Rebate

Snow Performance Electronic Solenoids

Snow Performance electronic solenoids are designed for use with the Snow carburetor plate nozzle adapter. They include a wiring harness, a plastic solenoid with 1/8 in. NPT female threaded attachments, and necessary fittings. The solenoids should be mounted after the throttle plate to keep from siphoning at idle, or if the nozzle must be mounted lower than the reservoir to keep from gravity feeding.

4.17 out of 5 stars ( 12 )

$73.00

Manufacturer Rebate

Snow Performance Water Injection Nozzles

These Snow Performance water injection nozzles feature a unique design that provides the best possible atomization. They have integrated 100-micron filters, so they will keep larger particles out of the system. Available in a variety of flow rates, these Snow Performance water injection nozzles can support a wide range of engines from 150-1,500 hp.

4.69 out of 5 stars ( 13 )

$31.23

—

$31.99

Manufacturer Rebate

Snow Performance VC-30 Water/Methanol Injection Controllers

Snow Performance VC-30 progressive controllers proportionally inject more or less water/methanol according to boost pressure. Doing this gives an accurate delivery allowing cooling and performance improvements over a wide range for improved drivability and cooling benefits. The VC-30 controllers include a digital display and manifold absolute pressure sensor, and the start and full points are adjustable for engagement and the delivery curve to match what your engine requires. Snow Performance VC-30 progressive controllers are especially helpful for direct-injected engines to remove 100 percent of carbon build-up on the valves, and is recommend for all street/strip driven gas forced induction vehicles using a turbo or centrifugal supercharger looking for cooling over a wide range.

3.67 out of 5 stars ( 3 )

$180.36

Manufacturer Rebate

Snow Performance Multi-Pump Relay Modules

The Snow Performance multi-pump relay modules are the ideal solution for simplifying the wiring of high-performance multi-pump fuel systems. Designed to support multiple fuel pump upgrades, these compact modules integrate three individually fused 30-amp relay circuits into a single, easy-to-install unit, reducing wiring complexity while improving reliability Fully potted for superior resistance to vibration and moisture, these relay modules feature convenient set-screw input, output, and trigger terminals that eliminate the need for additional connectors and minimize potential wiring failures. Whether you're upgrading a street, strip, or race application, the Snow Performance multi-pump relay modules are the dependable link between power and performance, delivering clean, power management for demanding fuel system setups.

Not Yet Reviewed

$272.87

Manufacturer Rebate

Snow Performance Reservoirs

These reservoirs from Snow Performance are perfect for trunk or remote mounting. They come with rubber insulators, quick connect fittings, and extra tubing. They're a must for road racing applications or where high duty cycle/horsepower mandates higher volume on board.

3.75 out of 5 stars ( 4 )

$58.13

—

$312.50

Manufacturer Rebate

Snow Performance Check Valves

Snow Performance check valves are high-flow inline water methanol valves that offer superior safety and flow compared to other water methanol check valves on the market. They are custom-made with 100 percent methanol-resistant stainless steel springs and EPDM seals, ensuring zero corrosion even with high concentrations of methanol. The aluminum valves are available in different sizes and finishes—even in quick-connect models.

5.0 out of 5 stars ( 2 )

$31.24

Manufacturer Rebate

Snow Performance Boost Cooler Stage-1 Water/Methanol Injection Systems

In gasoline engines, as with any intercooler, Stage-1 Boost Coolers suppress detonation, so more power-producing boost and timing can be utilized. Water, with its high latent heat of vaporization, cools the intake charge and combustion. Methanol cools the charge and combustion, but also acts like an extremely high-octane fuel (some researchers claim as high as 120 octane) and adds more oxygen to combustion. These systems contain everything needed to start making big hp! They're designed for use in gasoline (6-15 psig boost) supercharged/turbocharged vehicles. Systems include: * 300 psi high-volume pump * Adjustable boost pressure switch * 3 qt. reservoir * Two nozzles sized to your FWHP and boost levels * Bosch relay and all the electrical parts * Fittings, tubing, etc. for installation

4.44 out of 5 stars ( 9 )

$375.00

—

$718.23

Manufacturer Rebate

Snow Performance Boost Cooler Stage-3 Diesel Water/Methanol Injection Systems

In diesel engines, the effect of these Snow Performance Stage-3 Diesel water/methanol injection systems is threefold: 1. The intercooling effect provides more available air and all the benefits of a higher positive pressure ratio (more power-giving fuel can be utilized safely without high-combustion temperatures); 2. The combustion of water provides more power on the power stroke; 3. Methanol acts as an additional fuel for more power. These systems are designed for applications over 350 hp/25 psig boost. The Snow Stage-3 Diesel kit features a new digital variable controller with a 2d map programmed into it's microprocessor that takes both boost and exhaust gas temps into account in regulating injection. The net effect is smooth power in all engine load states with no combustion quench resulting in a true turn-on-and-forget system. The controller is dash mounted and includes read-outs for boost, exhaust gas temp, and pump output for full visibility. Features include: * A larger 220 psi pump * Heavy-duty digital variable controller (25-100 psi) for max power and cooler EGTs * Great for smooth power at all boost/rpm levels * Expect 80 RWHP and 250 degree exhaust gas temperature reductions

3.0 out of 5 stars ( 3 )

$1,041.68

—

$1,250.99

Manufacturer Rebate

Snow Performance Nozzle Holder Elbows

Snow Performance nozzle holder elbows give you the option to mount your water/methanol nozzles at a 90 degree angle. These fittings are ideal if you're adding nozzles to your current system or just rerouting what you have. For water/methanol injection system replacement parts, Snow Performance will keep you connected.

Not Yet Reviewed

$10.72

Manufacturer Rebate

Snow Performance Boost Switches

Snow Performance offers all of the spare parts that you may need for use with your Snow Performance Boost Cooler kits. These boost switches are constructed from steel and plastic and have a natural finish.

5.0 out of 5 stars ( 6 )

$36.99

Manufacturer Rebate

Snow Performance Fittings

Snow Performance offers wide range of fittings that are ideal for plumbing your water/methanol systems. These quality fittings are offered in different sizes, styles, and finishes to deliver reliability, smooth flow and ease of installation. Order the fitting that is best suited to your application needs.

4.4 out of 5 stars ( 5 )

$5.20

—

$10.99

Manufacturer Rebate

Snow Performance Dual Nozzle Upgrade Kits

Snow Performance dual nozzle upgrade kits allow you to add an additional nozzle to be mounted in any Snow Performance Boost Cooler kit. They include a tee splitter, a junction piece with quick-connect fittings, a nozzle holder, and a section of hose. The Snow Performance dual nozzle upgrade kits are perfect for applications that need more flow than one nozzle can provide, or to get even distribution for a dual plenum/throttle body/carburetor setup.

3.89 out of 5 stars ( 9 )

$41.66

—

$312.50

Manufacturer Rebate

Snow Performance Water Methanol Filters

Snow Performance water methanol filters are designed to be placed on the inlet or vacuum side of the pump. The 100 micron replacement models help prevent debris from entering the pump without restricting the flow of methanol.

5.0 out of 5 stars ( 1 )

$61.99

Manufacturer Rebate

Snow Performance Direct Port Hardline Upgrade Kits

Snow Performance offers direct port hardline upgrade kits to directly mount a nozzle into each cylinder—perfect for those running high-horsepower applications that depend on the water-methanol for tuning. Each kit comes with a distribution block, high-flow solenoid upgrade, and all plumbing to install a nozzle in each cylinder. Select the kit for your application needs.

Not Yet Reviewed

$309.24

—

$371.09

Manufacturer Rebate

Snow Performance Boost Cooler Stage-1 Diesel Water/Methanol Injection Systems

In diesel engines, the effect of Snow Performance Stage-1 diesel water/methanol injection systems is threefold. First, the intercooling effect provides more available air and all the benefits of a higher positive pressure ratio—more power-giving fuel can be utilized safely without high-combustion temperatures. Second—the combustion of water provides more power on the power stroke. And third—the Methanol acts as an additional fuel for more power. Select the Snow Performance boost cooler Stage-1 diesel water/methanol injection system designed for your application needs.

1.0 out of 5 stars ( 2 )

$416.99

—

$520.99

Manufacturer Rebate

Snow Performance Water-Methanol Injection Plates

Snow Performance water-methanol injection plates are the easiest way to mount the Snow water-meth nozzles on your throttle body. Simply fit this spacer between the throttle body and intake manifold—and enjoy custom placement of two 1/8 in. NPT ports. Each anodized billet aluminum plate features O-rings on both sides, eliminating the need to seal your throttle body with silicone.

3.67 out of 5 stars ( 3 )

$119.78

—

$124.99

Manufacturer Rebate

Snow Performance Boost Cooler Stage-3 2D Map Progressive Water/Methanol Injection Systems

Snow Performance boost cooler stage-3 2D map progressive water/methanol injection systems bring true 2D mapped water/methanol injection delivery to your direct fuel injected and forced induction vehicles. These create a 2D injection map based off boost and fuel pressure sensor input to deliver an extremely accurate amount of water/methanol when the engine needs it most. Bringing fuel pressure into the mix allows the injection curve to be extended past specific boost points for greater range/control. The stage 3 boost cooler controller is designed to mount on the steering column or the dash so no additional gauge pods need to be purchased and functions as a boost gauge, water/methanol controller, and fuel system monitor all in one! Proven to reduce the air inlet temperature by up to 100 degrees and increase octane by 25 points for maximum HP and cooling. Comes with adjustable stage 3 controller, -4 AN fittings, and, stainless steel braided line to mount pump/tank in the engine bay of your vehicle.

Not Yet Reviewed

$833.34

Page 1 of 3
Next