Availability
Scott Drake offers neutral safety switches to replace your damaged, missing, or faulty original. They're available for a variety of transmission applications from the 1960s and '70s. These quality reproductions are factory-style, so they will fit your vehicle without any modifications.
( 24 )
$70.15
Engine components need room to function properly. Scott Drake transmission to block spacer plates provide sufficient area for your flywheel, starter, and ring gear operation. These steel plates are precision-cut for the correct fit in your classic car's engine. Not too little, not too much; Scott Drake spacer plates locate your engine components in just the right place.
( 53 )
$70.15
—
$89.19
Cure your adjustment woes with automatic transmission kickdown kits from Scott Drake. These reproduction kits are a direct fit for the specified application—ensuring exact shift points during the lifespan of your transmission with a properly adjusted throttle valve cable. The kickdown cables have plenty of flexibility, and the 9-piece kits include a cable, lever, spring, and bracket, along with all the hardware for simple installation.
( 5 )
$54.69
Scott Drake drum brake hubs enable you to easily replace your worn-out parts with brand spankin' new steel plates. They are available with either four or five holes for wheel studs, depending on your vehicle.
( 3 )
$98.95
Complete and ready to go, Scott Drake automatic transmission shifter assemblies include the reverse lockout mechanism. They offer sturdy construction with great chrome to "shift" your interior's style! These replacements are available for a variety of mid-1960s muscle car applications.
( 1 )
$263.95
Protect your clutch parts from dust, dirt, mud, water, snow, and ice. Scott Drake clutch lever dust boots cover the opening on your engine bellhousing. As with any rubber part located near heat, your stock boots will dry rot and become brittle and less effective over time. These replacements are available in a variety of styles to accommodate a variety of applications from the 1960s and '70s.
( 13 )
$30.89
Scott Drake offers these clutch forks for a variety of applications. These clutch release forks are made from quality materials and designed for reliable performance.
( 13 )
$95.55
—
$99.95
Scott Drake clutch linkage brackets allow the clutch equalizer bar to rotate front to back. These equalizer pivot mounts are made from the original Ford prints and are stamped from heavy-gauge steel for strength. They're available in different styles for fitment on nearly a hundred Ford and Mercury applications from the 1960s and '70s.
( 12 )
$70.15
Scott Drake automatic transmission master rebuild kits rebuild your tired and leaking automatic transmission. The kits include all that you need, from the paper gaskets to the steel clutch plates, to do the job right. Service your classic with Scott Drake automatic transmission master rebuild kits. Included parts: * Paper gaskets * Pan gasket * Rubber O-rings * Rubber lip seals * Metal clad seals * Sealing rings * Friction clutches * Steel clutch plates * Bushings
( 13 )
$162.95
—
$164.95
Get a classic look without breaking the bank! The Scott Drake line of reproduction transmission fluid dipsticks is manufactured from quality materials, ensuring a proper fit.
( 17 )
$21.37
—
$22.55
Scott Drake bellhousing spacers are great transmission accessories to create more clearance for your clutch. They're made from steel for long-lasting performance. Ensure proper clearance and smooth operation with Scott Drake bellhousing spacers, available for a variety of applications.
Not Yet Reviewed
$54.95
A sloppy transmission can pose a safety issue. Scott Drake automatic transmission shifter replacement parts are available to tighten up a loose shifter and correct other critical malfunctions on your stock shifter. We carry a large selection of Mustang components from Scott Drake, an industry leader in vintage Mustang replacement parts.
( 12 )
$2.32
—
$117.95
Scott Drake differential vents will replace your old vents and help your axle equalize atmospheric pressure, keeping excessive debris from contaminating the differential. These steel vents are strongly made for years of use; they screw into the threaded hole in the axle, while also securing the brake line and hose.
( 17 )
$18.99
Is your classic car's shifter feeling a bit loose and sloppy? A little tension from Scott Drake shift and super shift lever rebuild kits will eliminate the slack. These manual transmission kits are available for 3 and 4-speed shifters and include the insulators, springs, and trunnions needed. The super kits also include shoulder bolts. Why allow the "play" to worsen? Tighten up that wobbly, loose shifter with Scott Drake shifter rebuild kits.
( 10 )
$27.31
—
$40.41
Increase your transmission cooling with a Scott Drake deep transmission pan. These pans are one inch deeper than a stock pan, allowing for an extra two quart capacity.
( 5 )
$35.29
Do you need a bushing or spring? A bracket or retainer? Scott Drake clutch linkage components will help you to service your clutch—including the equalizer bar and related parts. Small components can be just as important as larger ones, and many of Scott Drake's clutch linkage components offer the correct original designs for a hassle-free fit. They're especially useful for 1960s and '70s era muscle car applications.
( 23 )
$2.50
—
$87.95
Keep dirt and debris out of your bellhousing! These Scott Drake reproduction plates are manufactured out of quality materials, ensuring a proper fit.
( 27 )
$16.95
—
$57.55
On Sale
When it's time for a rebuild or to swap the transmission out for a 5-speed, Scott Drake slip yokes are the best bet for your Mustang. These yokes are specifically designed for your vehicle and will provide exceptional service. When it's time to rebuild or strengthen your yoke, go with the company synonymous with Ford--get Scott Drake slip yokes.
( 9 )
$249.95
$137.95
—
$162.95
When it comes time to rejuvenate or rebuild your classic Mustang, Scott Drake has automatic transmission covers that will put a smile on your face. These die-cast zinc covers feature chrome plating with correct details and paint. They are exact reproductions and include the shift dial and shift seal. Make your Mustang look and feel like new with Scott Drake Mustang automatic transmission shifter covers.
( 5 )
$55.89
—
$61.85
If hard shifting and minor gear grinding have you worried about a complete transmission rebuild, relax—Scott Drake clutch cable kits might be all you need to resolve the problem. With these kits, there's no need to remove the clutch pedal; simply install the adjustable bracket that bolts to the pedal, along with a firewall support plate and "tool free" cable adjuster. No welding is needed; Scott Drake clutch cable kits also require less maintenance and are easier to install than hydraulic systems
( 9 )
$373.95
—
$411.95
Correct, not "close"--Scott Drake shifter linkage rods will be a perfect fit for your classic. They include the connector that is often worn and they are painted dark gray to prevent rust. Keep your shifts smooth with accurate Scott Drake shifter linkage rods.
( 3 )
$55.89
—
$90.39
Scott Drake shifter levers stand out with factory detailing and triple chrome plating. They include a cable and T-lever. Choose quality workmanship and looks for your classic--choose Scott Drake shifter levers.
( 2 )
$199.95
Scott Drake clutch fork pivots offer the fit and function required to maintain smooth shifts in your classic. They have a couple of choices for applications, but both are quality heavy-duty metal construction and include the proper hardware. Repair and restore your classic's performance with the help of Scott Drake clutch fork pivots.
( 1 )
$29.43
—
$37.90
Scott Drake rear-end vent hose kits allow the rear-end of your classic ride to breathe. Their vent hose kits run from the brake junction block up to the body and include attaching hardware.
( 4 )
$15.62
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
