Availability
Samlex America DC/AC Pure Sine Wave Power Inverters provide clean, stable power for computers, radio equipment, home theaters, and other applications that are sensitive to AC voltage irregularities. These inverters are available with a choice of input voltages from 12 to 48 Vdc. They also provide an array of output connections to suit every need, from direct distribution panel wiring to single or multiple outlets. Also available are pure sine wave inverters that are microprocessor-controlled and incorporate a built-in transfer switch. These industrial-grade inverters are capable of driving highly reactive and capacitive loads at start-up. Line-synchronized operation allows the transfer from the power grid to the battery backup to be almost instantaneous! Perhaps you're doing something a bit more commercial? Some Samlex America inverters are assembled as 19 in. 1U rack-mount packages. They include a powerful digital signal processor that allows for the easy programmability of the main parameters on the LCD display and the keypad on the front panel, or they may be interfaced to a PC via RS-232. Whether you're looking for a modest 150 watt inverter to power your laptop or a massive 3,000 watt unit to supply your home, you'll find that the lineup of available Samlex America DC/AC Pure Sine Wave Power Inverters has just the right product!
( 1 )
$144.90
—
$970.80
Samlex America DC/AC Modified Sine Inverters are ideal for powering tools, water and air pumps, incandescent lighting systems, and kitchen appliances from your car, truck, boat, RV, solar energy system, or battery bank. Use them anywhere that does not require a "pure" sine wave. Generally speaking, modified sine wave inverters are more economical than their "pure" sine wave counterparts. Whether you are looking for a tiny 100 Watt inverter or a substantial 3,000 Watt unit, you'll find that the lineup of economical Samlex America DC/AC Modified Sine Inverters has just the right product to suit your needs!
( 4 )
$40.30
—
$542.70
These Samlex America Switching DC/DC Converters offer high-efficiency switch-mode step-down DC/DC conversion. These SDC Series of down-converters change an input voltage of 24 VDC nominal; actually a range of 20 VDC to 35 VDC, to a highly-regulated output voltage of 13.8 VDC. These converters are non-isolated and provide no galvanic isolation between their input and output. Therefore, these units are meant for use in negative-ground systems. Features include overvoltage/short-circuit protection; temperature compensated current limiting, output-side overvoltage protection, input-side overvoltage/ transient protection and input-side reverse polarity protection. Some possible applications include industrial equipment, heavy trucks, buses, marine vehicles, mobile radio equipment, lighting systems and AM / FM / Audio systems. These Samlex America Switching DC/DC Converters are designed for heavy duty applications with output ratings up to 60A… and are very robustly-built!
Not Yet Reviewed
$108.70
—
$173.70
These Samlex America Step-Up DC-DC Converters offer high-efficiency switched-mode step-up DC/DC conversion. These up-converters change an input voltage of 13.8 Vdc nominal--actually, a range of 9 Vdc to 18 Vdc--to a highly regulated output voltage of up to 27.5 Vdc. These converters are non-isolated and provide no isolation between their negative input and output. Therefore, these units are meant for use in negative-ground systems. Features include overvoltage and short-circuit protection, temperature compensated current limiting, output-side overvoltage protection, input-side overvoltage and transient protection, and input-side reverse polarity protection. Some possible applications for these Samlex America Step-Up DC-DC Converters include general engineering, industrial equipment, heavy trucks, buses, marine vehicles, specialized mobile radio equipment, and aviation systems.
Not Yet Reviewed
$132.00
—
$183.80
Samlex Solar portable and foldable solar battery charging kits are designed to charge all types12 V lead-acid batteries. Battery types may include wet cells, SLA, AGM, Gel and VRLA; all of which use lead-acid chemistry. The kits can be folded neatly into their included carrying case for easy storage while the kit is not in use. Their kits are perfect for charging and maintaining any 1 2V battery system, including the following applications: * Automotive, recreation vehicles, trailers * Boats and marine craft * Motorcycles * Cabins and cottages * Camping sites * Construction and farm equipment * Material handling equipment * All-terrain vehicles (ATV) and snowmobiles * Disaster/emergency preparedness operations * Your special application Portable charging kit features: * Durable integrated design with high-efficiency Polycrystalline solar modules * Integrated 10A Series Type PWM Solar Charge Controller * MSK-135 consists of three 45 watt solar panels connected in parallel (135 Watts) * MSK-90 consists of two 45 watt solar panels connected in parallel (90 watts) * Support legs with angle adjustment * Panels are built with strong anodized aluminum frames and high-transparency solar glass for maximum light permeability and high efficiency * Folds away into stylish carrying case for quick transport or storage * Each array includes a cushioned metal handle Samlex Solar is well known, internationally, for the quality of their solar products. Be prepared to keep your batteries topped off by contacting DX Engineering for your own Samlex Solar Portable Solar Battery Charging Kits.
( 1 )
$528.40
—
$671.70
Samlex America Inverter Installation Kits make setting up your new power inverter easy. These kits provide a safe and reliable connection to your battery bank! Kits contain a pair of heavy-duty cables that are correctly sized for the application and a corresponding fuse assembly. bank. with a fuse holder, and all of the required hardware. What could be easier? The cables feature annealed and tinned copper conductors of high strand counts to ensure maximum flexibility and corrosion resistance. The cable insulation is layered against abrasion, oils, acids, and heat. The insulation is designed to withstand a temperature range of -50C to 105C. That's a span of over 275 degrees Fahrenheit! The short version of this story is that anytime you need a quality installation kit for ANY brand of inverter, these Samlex America Inverter Installation Kits will make your work simple and trouble-free!
Not Yet Reviewed
$179.30
—
$626.70
Samlex EVO Series Programmable Remote Controls are intelligent remote controls designed specifically for use with the NEW Samlex Evolution Series of Inverter/Chargers. You may view valuable real-time activity on the informative 32 character LDC screen while the unit is operating: Output voltage, Frequency, Amps, Watts, Volt Amps, Power Factor, Battery Voltage, Battery Current, Solar Input Current and much more. Use these remotes to program various inverter and battery charging parameters. Save sets of parameters on a removable 16-GB SD Card (the SD card slot is located on the face of the EVO-RC remote). You may transfer saved parameters to other EVO inverter/chargers or insert the SD card into a computer and make parameter adjustments there. Log historic power consumption data, inverter functionality, battery charging activity, faults and all of the conditions leading up to faults. These remotes even allow you to analyze trends for more efficient use of off-grid resources. Samlex EVO Series Inverter/Chargers are among the world's most advanced off-grid inverters. Add one of these Samlex EVO Series Programmable Remote Controls to your inverter to unleash the awesome capabilities these inverters can provide. Order from Summit Racing today!
Not Yet Reviewed
$161.20
When you want to install, maintain, or expand your current Samlex solar power system, their Solar Parts and Accessories are what you need. From mounting hardware and tilt-mounts to fuses and fuse blocks, Samlex has you covered! Do you need cables and connectors to expand your existing charging kit? Samlex has them, too. Whether your planned solar panel expansion is serial or parallel, they have the cables and connectors you require. Remember, when you have need of parts for your solar power system, DX Engineering is your best source for Samlex Solar Parts and Accessories.
Not Yet Reviewed
$18.80
—
$187.70
EVOLUTION Series Inverter-Chargers include a pure sine wave inverter, adaptive battery charger and transfer relay – All in ONE unit. Samlex Evolution Series Inverter-Chargers provide reliable AC power wherever it's needed. They're great for use with boats, RVs, remote cabins and specialty vehicles; as well as alternative energy, back-up and emergency power applications. Using state-of-the-art technology, Samlex EVOLUTION (EVO) inverter/chargers operate at 165 million instructions per second with lightning fast load and response times. They have 9 points of physical protection monitoring (being scanned up to 10,000 times per second) to detect fault conditions and protect themselves in a vast range of adverse environments. * AC Inputs: Two separate AC inputs – one for grid (priority #1), one for generator (priority #2), connect simultaneously, no need to reconfigure when different power sources are available. Generator Input is specifically designed to have more tolerance for distortion, prevents unnecessary "rejection of AC input and switch to inverter" by tolerating distorted wave forms that can be produced by generators. Each AC input is programmable for voltage and frequency. User determines the min and max thresholds to switch from Grid or Generator to Inverter. Generator start can be initiated by "Status Relay" contact, can be programmed to activate when grid is lost. * Solar Input Connect a solar charge controller directly to the EVO though the Battery Charger external DC input. Seamlessly integrate solar charging. ONLINE Mode can be used to prioritize Batteries/Inverter over the grid, ideal for operating primarily on solar power (when the grid is available, but might be costly). * Battery Charger 3 or 4 stage charging with Equalization (must be manually initiated). Adaptive algorithm is used during Bulk to assess battery condition. Subsequent stages are then based on the condition of the battery rather than pre-set time periods for Absorption and Float. Prevents unnecessary charging, extends the life of batteries. Programmable; set battery voltage thresholds to initiate charging. * Transfer Switch Zero transfer time switched from Inverter to Grid. When the grid comes on, the inverter synchronizes with the wave form and then transfers instantly at zero crossing. Less than 16ms transfer when going from Grid to Inverter. When grid is lost, the transfer relay switches to inverter at the correct place in the wave form, the transfer takes less than 16ms. * Surge Capacity (Power Boost) The EVO has 3X surge power! Additionally, the EVO has large power overload allowances available for long periods of time. Increased inverter capacity means you can size your inverter smaller to handle heavy surge loads, reducing costs. * State-of-the-Art Technology EVOs operate at 165 million instructions per second producing lightning fast load and response times. They are practically indestructible because of 9 physical points of protection monitoring being scanned up to 10,000 times per second for adverse conditions. EVOs will detect fault conditions and initiate a healthy shutdown before any product damage can be done. An EVO-RC remote control (sold separately) may be used to capture detailed EVO performance data. It records all detected faults and the conditions leading up to faults. Data is stored on a removable 16GB SD Card (in the remote). Use data to analyze trends for more efficient use of system resources. EVOs use five temperature sensors placed throughout the unit to determine operation of 2 speed controlled cooling fans. Reduces unnecessary fan noise and energy consumption by only running when and where the fans are needed. Samlex EVOLUTION Series Inverter-Chargers intelligently integrate an AC Inverter, Battery Charger and Transfer Relay into an advanced and affordable off-grid power solution. They are now available from DX Engineering!
Not Yet Reviewed
$2,066.30
—
$2,522.00
Use Samlex Solar Panel Kits with a Samlex Solar Charge Controller for a flexible installation, configured the way you want it, or as an expansion panel for an existing solar-electric system. Samlex solar panels provide many benefits, including: High efficiency crystalline solar cells; a low-profile panel design; all-weather anodized aluminum and tempered-glass construction, and top-quality cables and mounting hardware. These panels may be tied together for higher-output installations. For example, use three 150 Watt panels for a 450 Watt system! Simply add a quality Samlex Solar charge controller of your choice to one of these panel kits and you'll have a complete solar battery-charging system. Use them for boats, RVs, rural cabins, or anywhere the power grid isn't conveniently available.
Not Yet Reviewed
$408.40
—
$474.00
Samlex Inverter Remote Controls are a very convenient addition to any power control installation. The remote controls range from a simple on-off switch with a power-indicator LED to full LCD displays showing power on-off, a power-output bar graph, the current battery voltage in tenths of a volt, and input or output faults. Some advanced LED displays also show power and voltage on LED bar graphs, plus over-voltage, under-voltage, over-temperature, and overload conditions. You choose the remote to match your inverter model and the information you want to display. Cabled installation is easy with the supplied cable and connectors. Whether you are replacing a damaged remote or adding functionality to your new or existing inverter, Samlex Inverter Remote Controls from DX Engineering will put you back in control!
( 1 )
$25.60
—
$41.20
Samlex Transfer Switches provide power grid flexibility when the grid is available. Whether you're using solar panels, batteries, or a generator to power your AC appliances when you're on the move, chances are you'll want to use the power grid when it's accessible. Connect a Samlex transfer switch to your generator, or to your inverter/battery bank, and have your AC source switched to the power grid automatically when you plug in. These transfer switches are ideal for RVs, boats, and any vehicle with an AC inlet. They have a rated capacity of 30 amps at 120 Vac, and are suitable for a 30 amp utility power cord and generator or an inverter of up to 3.6 KVA capacity. These switches can be installed on the line-side of the main breaker panel or on the load-side for switching dedicated circuits. Use Samlex America Transfer Switches from DX Engineering to automatically make the switch!
Not Yet Reviewed
$321.50
If you can't always be in the equipment room, but still need to monitor critical battery power, Samlex Battery Charger remote controls will help you keep an eye on things. Constructed to mount flush in a wall or console panel, these remotes will turn the battery charger on or off and indicate battery status, saving YOU a trip to the equipment room to physically check the charger. Green, yellow, and red LED indicators deliver four vital parameters of information--power on, float charge, charging, and bulk charge. The simplest and most and reliable way to remotely monitor a battery charger and the condition of the batteries! You can get your Samlex Battery Charger Remote Controls from DX Engineering, today!
Not Yet Reviewed
$44.20
Samlex Automatic Charge Isolators are specialized battery isolators that protect both the batteries and the load connected to them. They are normally used to isolate a starting battery and a reserve battery. However, if the voltage from the power source rises, driving the battery voltage high, the load and the utility battery will be disconnected from the excessive voltage. Rated at 160A, these charge isolators may be set up as a high-power switch, a starting battery assistant, a voltage dependent switch, and other uses. Samlex Automatic Charge Isolators will keep your batteries and your expensive electronic devices safe... so your charge card also remains secure.
( 1 )
$159.80
Samlex Battery Monitors are smart pieces of equipment which automatically detect battery voltages between 7V and 32V--ideal for 12 or 24 volt systems. Readily programmable with your desired alarm points, these battery monitors are small but powerful. Designed for flush mounting, these devices are only 2.5 in. square. With such compact size, they can be mounted almost anywhere. With only two connections to make, installation is easy. Battery monitoring is important in many areas--solar charging systems, communications installations, battery backup systems, aircraft, boat, and RV and UPS applications. Some applications are more critical than others, but knowing the condition of your batteries in any application can spare you some unwanted grief. When you need to keep an eye on your batteries from a distance, Samlex Battery Monitors from DX Engineering are like having X-ray vision.
Not Yet Reviewed
$60.20
—
$108.70
Samlex Solar Charger Controllers are used in conjunction with photo voltaic (PV) panels for uses such as automotive battery maintenance, RV applications, marine uses, and off-the-grid home battery storage systems. Samlex provides a wide range of controllers from 6A to 40A capacity. You may choose multi-stage, MPPT, or PWM controller types with series or shunt regulation. Displays vary from simple LED indicators to bar graphs and multi-function LCD readouts. Cruising our DX Engineering catalog will help you decide which controller will work best for you. Whether you need a basic controller for a small battery maintenance system or a heavy-duty, high-current controller for comfortable rural living, you'll find the right Samlex Solar Charger Controllers to provide the characteristics you seek.
Not Yet Reviewed
$65.60
—
$157.60
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
