Availability
S&S Cycle early Twin Cam gear drive cam chest replacement kits are designed to upgrade your early 1999-2006 Twin Cam to 2007-16 style camshafts and oil pump. Your engine will receive increased performance from the higher lifts, optimized camshaft timing, and from more consistent oil flow and pressure. By eliminating the chains, gear drive camshafts keep the valve events at precise timing and free up parasitic loss. Order the kit recommended for your specific Harley-Davidson© street bike. Kit components include: * Forged cam plate * Forged 3-stage oil pump * Inner and outer gear * Premium lifters * Quickee pushrods * Pushrod tubes * Available with or without gear drive camshafts * Inner camshaft bearings * All necessary gaskets, O-rings, and hardware
Not Yet Reviewed
$1,499.95
—
$1,999.95
S&S Cycle Super E complete carburetor kits feature four fuel delivery ports for better throttle response, an O-ring sealed idle mixture screw, increased airflow for more power, and an adjustable accelerator pump for quick-throttle response and easy starting. S&S utilizes your factory dual cable system to facilitate installation and ensure safe operation. These direct replacement kits also have a variable-position enrichment starting system. Super E and Super E Shorty kits are available for a wide range of Harley-Davidson® bikes from 1955 and up.
( 2 )
$799.95
—
$899.95
With S&S Cycle's wide selection of Harley-Davidson® parts, you're sure to find the parts you're looking for, including head bolt kits. These kits include steel 12-point head bolts and washers that are designed to exceed the needs of your high performance engine.
( 1 )
$21.95
—
$199.95
You thought it couldn't get better, but it did! S&S Cycle Super E carburetors have four fuel delivery ports for better throttle response, and a smoother transition from the low/intermediate system to the main jet. They've also added an O-ring seal around the idle mixture screw to eliminate the possibility of air leakage and to help prevent the screw from vibrating out of adjustment. Super E carburetors feature adjustable accelerator pumps and special variable-position enrichment systems for quick throttle response and easy starting. These "super" carburetors are direct replacements and use your factory dual cable system for safe operation. The carbs are available in standard and shorty models. Get increased airflow for more power with S&S Cycle Super E carburetors.
Not Yet Reviewed
$499.95
—
$514.95
S&S Cycle billet oil pumps are designed and built for your V-Twin. They feature a smoother design from beautiful strong billet and pressure relief towers that are .300 in. shorter than your OEM oil pump. Kits may include: * Pump with cover * Mounting bolts * Supply and return gears * Driveshaft with keys and snap rings * Check ball and spring * Pressure relief valve and spring * Check ball and release valve cover screws with O-rings * Miscellaneous hose fittings, plugs, screws, and gaskets
Not Yet Reviewed
$499.95
S&S Cycle 124 in. (standard compression) Hot Set-Up cylinder kits package pistons and cylinders for use as replacements or as the basis for a new engine build. The pistons are a flat dome design, and the cylinders are machined with the stock bolt pattern intended for use in stock crankcases. Select the appropriate kit for your Big Twin. S&S cylinder and piston kit contents and notes: * S&S 4 1/8 in. bore cylinders -- Durable wrinkle black powdercoat finish * Forged flat domed pistons, rings, wrist pins * Head and base gaskets * Designed for 4 5/8 in. flywheels, resulting in 124 in. displacement * Cylinders can be used with stock or S&S cylinder heads with stock bolt pattern
Not Yet Reviewed
$1,534.95
—
$1,679.95
S&S Cycle cylinder studs are the perfect replacement for your OEM or S&S cases. These steel head studs are black oxide coated and strong enough to use on the largest of V-twin engines. So next time you do a top end on your Harley-Davidson®, update those head studs with S&S cylinder studs.
( 1 )
$99.95
S&S Cycle Late Twin cam chain drive cam chest upgrade kits contain everything needed to replace it all! Your engine will receive increased performance from the higher lifts, optimized camshaft timing, and from more consistent oil flow and pressure. Kits can be installed without the removal of your rocker box covers. They're available for a variety of Harley-Davidson© street bikes from 2006 and up. Kit components include: * Forged cam plate * Forged 3-stage oil pump * Premium lifters * Hydraulic chain tensioners * Quickee pushrods * Pushrod tubes * Chain drive camshafts * Inner camshaft bearings * All necessary gaskets, O-rings, and hardware
Not Yet Reviewed
$1,499.95
—
$2,060.95
S&S Cycle 110 in. Power Packages are the ideal combination of performance and savings to transform your Twin Cam HD without breaking the bank. Bump the early Twin Cam from late 96ci or 103ci to 110ci, as well as add matched cams/cam plate/oil pump and everything else a high performance cam chest needs to reliably make big power. Features: * 4 in. bore bolt on cylinder and piston kit * 10.5:1 compression * Wrinkle black finish * S&S 585 Easy Start cams in either gear or chain version * TC3 oil pump * TC3 cam plate * S&S cam chain tensioners or outer cam drive gears * Quickee adjustable pushrods with tubes * S&S precision tappets * Low-friction ductile cast iron liner * Bolts in with no machining, balancing, or splitting the crankcases * Cylinders fit to pistons--no machining required * All parts required to upgrade to gear drive cam or hydraulic tensioners in one easy to order part number
Not Yet Reviewed
$3,345.95
—
$3,467.95
If you have an upcoming project that involves one of the big twin-style crankcases, check out S&S Cycle engine stands. They provide an economical way to hold an engine on a work bench, for shipping or for display. They're constructed from heavy-gauge stamped steel and sport "S&S" laser-cut into both ends. These engine stands wear a bulletproof blue powdercoated finish to help deter corrosion and minor abrasions. For proven performance, S&S Cycle products deliver.
Not Yet Reviewed
$199.95
S&S Cycle breather reed valve assemblies improve oil scavenging and reduce oil carryover. Plus, they'll make your bike run better. The steel breather reeds of these valve assemblies are normally closed. As they open and close again during the stroke cycle, a slight vacuum is maintained in the crankcase, greatly improving oil scavenging. Enjoy your riding experience even more after you install S&S Cycle breather reed valve assemblies.
Not Yet Reviewed
$165.95
S&S Cycle standard adjustable pushrods help to assure consistent valvetrain operation under all conditions. The pushrods are made from rigid chromoly steel tubing and offer a simple, trouble-free installation. You can purchase just the pushrods or as a set with pushrod covers, O-rings, and cover keepers. Replace the stock, non-adjustable pushrods in your stock or high performance application with S&S Cycle standard adjustable pushrods, available for a wide range of Harley-Davidson® bikes from 1984 and up.
( 1 )
$152.95
—
$279.95
S&S Cycle Late Twin Cam Easy Start chain drive cam chest upgrade kits contain everything needed to replace it all! Your engine will receive increased performance from the higher lifts, optimized camshaft timing, and from more consistent oil flow and pressure. Kits can be installed without the removal of your rocker box covers. Easy Start kits allow the stock starter to start any engine regardless of compression ratio! Order the kit recommended for your particular Harley-Davidson© street bike. Kit components include: * Forged cam plate * Forged 3-stage oil pump * Premium lifters * Hydraulic chain tensioners * Quickee pushrods * Pushrod tubes * Easy Atart chain drive camshafts * Inner camshaft bearings * All necessary gaskets, O-rings, and hardware
Not Yet Reviewed
$2,225.95
—
$2,529.95
S&S Cycle Super Stock cylinder head kits feature stock-appearing cylinder heads with improved performance. These heads work well with engines of stock displacement but are ideal for engines with a little larger stroke or bore. They are compatible with stock rocker boxes, intake manifolds, and exhaust. The S&S high-performance valve springs allow for camshafts with larger lifts. Super Stock aluminum cylinder head kits are available in multiple finishes depending on application and they contain all the parts needed for installation except where noted.
Not Yet Reviewed
$1,695.95
—
$2,149.95
Easily installed, easily removed--S&S Cycle Quickee adjustable pushrods are designed for a simple, trouble-free installation that does not require removal of the gas tank, rocker assemblies, or even the rocker box cover! Innovative Quickees feature threaded adjusters that screw into the pushrods until the threads disengage and the adjuster simply slides into the pushrods, making your installation or removal easy. Then, once the pushrods are installed and adjusted, the locknut keeps the adjuster from moving. They will work with stock and aftermarket cams, as well as stock pushrod covers. S&S proven performance makes life easier with their Quickee adjustable pushrods.
( 1 )
$209.95
—
$336.95
S&S Cycle precision tappets are high performance replacements for S&S Cycle's previous standard and premium lifters for M8, Twin Cams, and late Sportster applications. Each precision tappet is hand assembled to exacting tolerances and designed for quiet operation and rapid pump up. Features and benefits: * Reduced valve train noise from start-up to shut down * Close tolerances for low leak-down rates * Fast pump up and superior high-rpm performance
Not Yet Reviewed
$279.95
S&S Cycle Hi-4N ignitions are one-piece machined aluminum housings that reduce vibration and improve heat dissipation and reliability. Features: * Improved kick-start algorithm designed to start as easily as points * BCD switches with solid detent * Legible markings allow easy and repeatable adjustments of mode, advance rate, and rev limit * Single-fire and dual-fire function built into a single module * Flexible wiring harness makes installation easier
Not Yet Reviewed
$411.95
—
$599.95
Whether you are rebuilding a classic or attempting to eliminate a mysterious leak, S&S Cycle V-series engine gasket kits will help you get that new-seal feel that your ride deserves. Their kits are available in various sets, allowing you to do as much or as little as you desire. No matter the project, you can find the gaskets for the job in S&S kits. They are available for various models and in varying engine level kits to fit any cycle application you wish to tackle.
Not Yet Reviewed
$91.95
—
$239.95
The S&S Cycle Stealth Air Stinger air cleaner kits take the existing air cleaner and replaces the air smoothing stinger with a similarly shaped filter element. More filter surface equals a 55 percent gain over a factory filter, especially in Harley-Davidson® Milwaukee-Eight (M8) models. S&S Cycle offers applications for most Harley-Davidson® models ranging from 2001 up to current year. Each kit includes a cotton gauze air filter with a stylish air cleaner cover. The covers are offered in different styles, in your choice of chrome or gloss black finishes to complement your motorcycle's aesthetics. Some kits come with an aluminum anodized round ring. The Air Stinger filter element is washable and designed to last for years. Select the kit designed specifically for your HD® bike's setup.
Not Yet Reviewed
$236.95
—
$407.95
Experience the new-and-improved S&S Cycle Super G carburetors! With a huge 2 1/16 in. bore and four fuel delivery ports instead of three, your bike is set for high performance on the street. Super G carbs serve up the benefits of better throttle response, along with a smoother transition from the low/intermediate system to the main jet. S&S added an O-ring seal around the idle mixture screw to eliminate the possibility of air leakage and to help prevent the screw from vibrating out of adjustment. Rounding out each package is an adjustable accelerator pump, special variable-position enrichment system, and the ability to use your factory dual cable system for safe operation.
Not Yet Reviewed
$499.95
.S&S Cycle compression release assemblies can help you service and maintain your Harley-Davidson® Big Twin. These replacement parts enable you to buy just the components you need, not an entire new compression release kit.
Not Yet Reviewed
$193.95
S&S Cycle high-output single-fire ignition coils are a perfect complement to the their IST or Super Stock ignition systems. These coils are actually two separate coils in a single package, and work well with all big twin and Harley-Davidson® Sportster models which have been converted to use single-fire electronic ignitions. The exterior is made of durable injection-molded material. The primary terminals are brass studs with nuts that accept 10-gauge ring terminals. The high-voltage connections have sockets for the most popular style of spark plug wires. Get S&S Cycle high-output single-fire coils to fire-up your bike!
( 2 )
$193.95
S&S Cycle Teardrop air cleaner kits offer classic looks matched with performance. Efficient and free-flowing, these kits feature dimpled aluminum chrome covers with directional air cones on the inside to create smooth paths of airflow. All the while, their uniquely designed back plates feature air horn style radiused entryways to reduce turbulence. Wrangle some additional horsepower and timeless style for your bike with S&S Cycle Teardrop air cleaner kits.
( 4 )
$316.95
—
$399.95
S&S Cycle Super Stock generator-style crankcases for Big Twin engines with stock bores are designed with a stock-like appearance and incorporate updated design features that improve overall engine strength and reliability. Select the crankcase to fit your engine. Features and benefits: * Pre-clearance for strokes up to and including 5 in. * Motor mounts on crankcases for knucklehead engines are machined to fit stock 1936-47 frames. An adapter plate is included for 1948 and later-style frames * All cases are designed for late style generator, two brush type with 5/16 in. mounting bolts to eliminate early generator cradle/mounting strap bosses for simplicity and economics * Timken sprocket shaft main bearing, in all years, instead of stock-straight roller bearings; resulting in better flywheel assembly stability, placement and longer engine life * Kits include crankcase assembly, all required hardware and bearings for installation Note: All S&S crankcases use Timken style sprocket shaft bearings and 1958 and later pinion bearings. These cases will not accept stock 1957 and earlier flywheel assemblies.
Not Yet Reviewed
$2,152.95
—
$2,255.95
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
