Availability
S&S Cycle custom throttle cables are designed for use on any 2-cable carburetor installations on bikes with 1 in. O.D. handlebars. For proven performance, order the S&S Cycle custom throttle cables designed for your Harley-Davidson® model.
Not Yet Reviewed
$81.95
Whether you are rebuilding a classic or doing a custom build, using high-quality flanges and gaskets is vital to maintaining efficiency and compression. S&S Cycle manifold flanges are built to be reliable components. The last thing you want to do is to disassemble that engine twice, so use the right parts the first time. S&S Cycle manifold flanges are engineered for the stresses of nearly any custom build or rebuild you decide to take on; find a set for your application here today.
Not Yet Reviewed
$169.95
From cylinder head gasket kits to breather filters for a stock rocker box, valve stems to valve guides, O-rings, and more, S&S Cycle can provide you with everything you need to create a performance-driven, head-turning setup. S&S Cycle remains a respected name known for their commitment to delivering high-quality, high-performance solutions for Harley-Davidson® motorcycle enthusiasts, as well as custom motorcycle builders worldwide.
Not Yet Reviewed
$101.95
You can customize the performance of your ride by tuning your engine carburetors to your riding style. S&S Cycle master jet kits give you their full range of jet diameters, giving you a chance to change your mixture leaner or richer in most any application. This can help accommodate different riding styles, altitudes, weather, or rider builds. Humidity and higher temperatures will make you run rich, so changing to a smaller jet can help keep your bike at peak efficiency. While dry air and lower temperatures can make you run lean, so changing to a bigger jet can improve your performance. Take control of your carbs and fine-tune your machine with these S&S Cycle master jet kits. Features include: * One each intermediate jets (.025, .0265, .028, .0295, .031, .032, and .033 in.) * One each main jets (.062, .064, .066, .068, .070, .072, .074, .076, .078, .080, .082, and .084 in.)
Not Yet Reviewed
$112.95
You can customize the performance of your ride by tuning your engine carburetors to your riding style. S&S Cycle high-range jet kits give you the high range of jet diameters, giving you a chance to change your mixture leaner or richer in some stock and all performance applications. This can help accommodate different riding styles, altitudes, weather, or rider builds. Humidity and higher temperatures will make you run rich, so changing to a smaller jet can help keep your bike at peak efficiency. While dry air and lower temperatures can make you run lean, changing to a bigger jet can improve your performance. Take control of your carbs and fine-tune your machine with these S&S Cycle high-range jet kits. Features include: * One each intermediate jets (.0295, .031, .032, .and 033 in.) * One each main jets (.072, .074, .076, .078, .080, .082, and .084 in.)
Not Yet Reviewed
$71.95
Customize the performance of your motorcycle by tuning your engine to a specific riding style! S&S Cycle low-range jet kits allow you to change your carburetor fuel mixture, running leaner or richer, in most stock or moderate applications. This flexibility helps accommodate not only different styles, but also altitudes, weather, and rider build. For instance, humidity and higher temperatures will make your bike run rich, so changing to a smaller jet diameter can help keep you cruising at peak efficiency. Take control of your carb, fine-tuning with a set of brass S&S Cycle low-range jets! These kits include: * One each intermediate jets (.025, .0265, .028, and .0295 in.) * One each main jets (.062, .064, .066, .068, .070, .072, and .074 in.)
Not Yet Reviewed
$71.95
S&S Cycle cylinder studs are the perfect replacement for your OEM or S&S cases. These steel head studs are black oxide coated and strong enough to use on the largest of V-twin engines. So next time you do a top end on your Harley-Davidson®, update those head studs with S&S cylinder studs.
( 1 )
$99.95
S&S Cycle billet oil pumps are designed and built for your V-Twin. They feature a smoother design from beautiful strong billet and pressure relief towers that are .300 in. shorter than your OEM oil pump. Kits may include: * Pump with cover * Mounting bolts * Supply and return gears * Driveshaft with keys and snap rings * Check ball and spring * Pressure relief valve and spring * Check ball and release valve cover screws with O-rings * Miscellaneous hose fittings, plugs, screws, and gaskets
Not Yet Reviewed
$499.95
Easily installed, easily removed--S&S Cycle Quickee adjustable pushrods are designed for a simple, trouble-free installation that does not require removal of the gas tank, rocker assemblies, or even the rocker box cover! Innovative Quickees feature threaded adjusters that screw into the pushrods until the threads disengage and the adjuster simply slides into the pushrods, making your installation or removal easy. Then, once the pushrods are installed and adjusted, the locknut keeps the adjuster from moving. They will work with stock and aftermarket cams, as well as stock pushrod covers. S&S proven performance makes life easier with their Quickee adjustable pushrods.
( 1 )
$209.95
—
$336.95
S&S Cycle standard adjustable pushrods help to assure consistent valvetrain operation under all conditions. The pushrods are made from rigid chromoly steel tubing and offer a simple, trouble-free installation. You can purchase just the pushrods or as a set with pushrod covers, O-rings, and cover keepers. Replace the stock, non-adjustable pushrods in your stock or high performance application with S&S Cycle standard adjustable pushrods, available for a wide range of Harley-Davidson® bikes from 1984 and up.
( 1 )
$174.95
—
$249.95
S&S Cycle Teardrop air cleaner kits offer classic looks matched with performance. Efficient and free-flowing, these kits feature dimpled aluminum chrome covers with directional air cones on the inside to create smooth paths of airflow. All the while, their uniquely designed back plates feature air horn style radiused entryways to reduce turbulence. Wrangle some additional horsepower and timeless style for your bike with S&S Cycle Teardrop air cleaner kits.
( 3 )
$329.95
—
$398.95
S&S Cycle roller rocker arms were designed for superior strength and to eliminate the failure-prone stress areas found in other rockers. These replacement arms are forged from 8620 steel, heat-treated, and then shot-peened for additional strength. They feature 3/4 in. long bronze bushings, compared to the more common 1/2 in. long bushings or needle bearings. S&S Cycle roller rocker arms are available in 1.500:1 ratio, 1.625:1 ratio and 1.725:1 ratio. Order the set recommended for your bike model.
Not Yet Reviewed
$652.95
S&S Cycle stealth air cleaner kits are for the rider who wants to go fast. The backing plate has a smooth radius entry to the throttle body or carburetor. The air filter is made of cotton gauze and is reusable and washable and it also features an air directional stinger cone that creates a smooth path for air to go into the intake. These kits are available with your choice of different S&S covers. These kits can be ordered without the cover so you can use your stock air cleaner cover if you want that sneaky concealed look. If you feel you need more power, a high-flow filter is also available for purchase separately. Upgrade your engine's breathing with the S&S Cycles stealth air cleaner kits. Select the kit designed and suited to your application needs.
( 2 )
$195.95
—
$367.95
S&S Cycle Late Twin Cam Easy Start chain drive cam chest upgrade kits contain everything needed to replace it all! Your engine will receive increased performance from the higher lifts, optimized camshaft timing, and from more consistent oil flow and pressure. Kits can be installed without the removal of your rocker box covers. Easy Start kits allow the stock starter to start any engine regardless of compression ratio! Order the kit recommended for your particular Harley-Davidson© street bike. Kit components include: * Forged cam plate * Forged 3-stage oil pump * Premium lifters * Hydraulic chain tensioners * Quickee pushrods * Pushrod tubes * Easy Atart chain drive camshafts * Inner camshaft bearings * All necessary gaskets, O-rings, and hardware
Not Yet Reviewed
$2,225.95
—
$2,529.95
S&S Cycle breather reed valve assemblies improve oil scavenging and reduce oil carryover. Plus, they'll make your bike run better. The steel breather reeds of these valve assemblies are normally closed. As they open and close again during the stroke cycle, a slight vacuum is maintained in the crankcase, greatly improving oil scavenging. Enjoy your riding experience even more after you install S&S Cycle breather reed valve assemblies.
Not Yet Reviewed
$165.95
S&S Cycle offers Street Performance .585 in. valve spring kits to upgrade your bike's performance—so you don't have just another "me too" motorcycle. Order the valve spring kit designed for your make and model. Features and specifications: * Available for fitment on a variety of Harley-Davidson® and Buell models * Kit contains springs, top and bottom collars, keepers, and shims * Accommodates camshaft lift to 0.585 inches * Suitable for high performance applications * Coil springs reduce the risk of valve float
Not Yet Reviewed
$163.95
S&S Cycle Super Stock cylinder head kits feature stock-appearing cylinder heads with improved performance. These heads work well with engines of stock displacement but are ideal for engines with a little larger stroke or bore. They are compatible with stock rocker boxes, intake manifolds, and exhaust. The S&S high-performance valve springs allow for camshafts with larger lifts. Super Stock aluminum cylinder head kits are available in multiple finishes depending on application and they contain all the parts needed for installation except where noted.
Not Yet Reviewed
$1,995.95
S&S Cycle precision tappets are high performance replacements for S&S Cycle's previous standard and premium lifters for M8, Twin Cams, and late Sportster applications. Each precision tappet is hand assembled to exacting tolerances and designed for quiet operation and rapid pump up. Features and benefits: * Reduced valve train noise from start-up to shut down * Close tolerances for low leak-down rates * Fast pump up and superior high-rpm performance
Not Yet Reviewed
$279.95
Whether you are rebuilding a classic or attempting to eliminate a mysterious leak, S&S Cycle V-series engine gasket kits will help you get that new-seal feel that your ride deserves. Their kits are available in various sets, allowing you to do as much or as little as you desire. No matter the project, you can find the gaskets for the job in S&S kits. They are available for various models and in varying engine level kits to fit any cycle application you wish to tackle.
Not Yet Reviewed
$112.95
S&S Cycle Super E complete carburetor kits feature four fuel delivery ports for better throttle response, an O-ring sealed idle mixture screw, increased airflow for more power, and an adjustable accelerator pump for quick-throttle response and easy starting. S&S utilizes your factory dual cable system to facilitate installation and ensure safe operation. These direct replacement kits also have a variable-position enrichment starting system. Super E and Super E Shorty kits are available for a wide range of Harley-Davidson® bikes from 1955 and up.
( 2 )
$799.95
—
$899.95
S&S Cycle Hi-4N ignitions are one-piece machined aluminum housings that reduce vibration and improve heat dissipation and reliability. Features: * Improved kick-start algorithm designed to start as easily as points * BCD switches with solid detent * Legible markings allow easy and repeatable adjustments of mode, advance rate, and rev limit * Single-fire and dual-fire function built into a single module * Flexible wiring harness makes installation easier
Not Yet Reviewed
$411.95
—
$599.95
S&S Cycle 97 in. big bore kits will increase the displacement of 88 in. engines to 97 in., are easy to install, and require no machining or re-balancing. Using an 11-fin design, these pre-finished cylinders closely resemble the OEM shape and are ready to install. Order an S&S Cycle 97 in. big bore kit—and take your stock engine case as big as it'll go! Features of the S&S Cycle 97 in. big bore kits: * The 97 in. big bore kits for 88 in. motors yield excellent results with stock cylinder heads * Feature the same silver or black wrinkle powder-coat as stock, so they match the stock finish of the engine * Specifications: 3.927 in. bore, 4 in. stroke, 97 in. displacement, and 9.7:1 compression ratio with stock heads (9.3:1 compression ratio with S&S 89cc heads or 10.7:1 with S&S 79cc heads) * Feature the largest bore (3.927 in.) that can safely be used in a cylinder with stock spigot diameter * Included S&S cylinders feature a much stronger cast iron liner to stand up to the added power * Easy installation: no need to bore or split existing cases, just swap the cylinders *Kit includes cylinders, pistons, rings and gaskets (head, base and exhaust) * For best performance, appropriate camshafts, performance air cleaner, performance exhaust and fuel system tuning is required
Not Yet Reviewed
$1,249.95
S&S Cycle 107 in. big bore kits are easy to install and require no machining or re-balancing. These are the largest bores that can be fit in your stock engine case. This is the largest bore that can be fit in a stock engine case. Stock engine height is maintained so there are no manifold or frame fitment issues. Using an 11-fin design, the pre-finished cylinders closely resemble the OEM shape and are ready to install. Take your stock engine case as big as it'll go with S&S Cycle 107 in. big bore kits! Product features include: * CP pistons feature a 3cc pop-up dome for slightly higher compression * Cylinders feature an increased fin area for better heat dissipation * Centrifugal cast gray liner features 40,000 psi tensile strength for superior wear and performance
Not Yet Reviewed
$1,305.95
Inspired by S&S Pro Stock drag race engines, S&S Cycle 4 in. Sidewinder big bore kits utilize a ductile cast iron liner wrapped in cast aluminum for optimum thermal conductivity and performance. These bolt-in kits do not require machining, re-balancing, or engine removal, and include just about everything you'll need to complete the installation. S&S Cycle 4 in. Sidewinder kits offer the biggest cylinder bore that can be installed in a stock crankcase without machining! Features: * Low-friction ductile cast iron liner * 10.5:1 compression * Bolts in with no machining, balancing, or splitting the crankcases * 88 in. engines are boosted to 100 in. * 96 in. and 103 in. engines are boosted to 110 in. * Complete kits include cylinders, pistons, gaskets, and instructions * Wrinkle black and silver cylinders that match stock finish
Not Yet Reviewed
$1,549.95
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
