HARLEY-DAVIDSON S&S Cycle

S&S Cycle Super E Complete Carburetor Kits

S&S Cycle Super E complete carburetor kits feature four fuel delivery ports for better throttle response, an O-ring sealed idle mixture screw, increased airflow for more power, and an adjustable accelerator pump for quick-throttle response and easy starting. S&S utilizes your factory dual cable system to facilitate installation and ensure safe operation. These direct replacement kits also have a variable-position enrichment starting system. Super E and Super E Shorty kits are available for a wide range of Harley-Davidson® bikes from 1955 and up.

5.0 out of 5 stars ( 2 )

$795.95

—

$895.95

S&S Cycle Late Twin Cam Chain Drive Cam Chest Upgrade Kits

S&S Cycle Late Twin cam chain drive cam chest upgrade kits contain everything needed to replace it all! Your engine will receive increased performance from the higher lifts, optimized camshaft timing, and from more consistent oil flow and pressure. Kits can be installed without the removal of your rocker box covers. They're available for a variety of Harley-Davidson© street bikes from 2006 and up. Kit components include: * Forged cam plate * Forged 3-stage oil pump * Premium lifters * Hydraulic chain tensioners * Quickee pushrods * Pushrod tubes * Chain drive camshafts * Inner camshaft bearings * All necessary gaskets, O-rings, and hardware

Not Yet Reviewed

$1,522.95

—

$1,924.95

S&S Cycle 98 in. Big Bore Kits

S&S Cycle 98 in. big bore kits are a fantastic upgrade if your Harley® is just a bit tired. The thicker and beefier cylinders mean that the engine will run cooler and you'll love the forged pistons that come with the kits. These are the largest bores that can be fit in your stock engine case. The cylinder and piston kits make going to the max bore size easy. There is no machining required and stock engine height is maintained. These kits come with nearly everything needed to get the most out of the added cu. in. to your stock engine. You won't believe how much power these kits produce! Features and specifications: * Kit yields excellent results with stock cylinder heads * Easy installation—no need to bore or split existing cases, just swap the cylinders * Available in a choice of either black or silver powdercoat finish with polished fins * Increased fin area for better heat dissipation * Valve pocket recessed in S&S pistons are enlarged for oversize valves and higher lift cams

Not Yet Reviewed

$1,386.95

S&S Cycle Cylinder Studs

S&S Cycle cylinder studs are the perfect replacement for your OEM or S&S cases. These steel head studs are black oxide coated and strong enough to use on the largest of V-twin engines. So next time you do a top end on your Harley-Davidson®, update those head studs with S&S cylinder studs.

5.0 out of 5 stars ( 1 )

$99.95

S&S Cycle Head Bolt Kits

With S&S Cycle's wide selection of Harley-Davidson® parts, you're sure to find the parts you're looking for, including head bolt kits. These kits include steel 12-point head bolts and washers that are designed to exceed the needs of your high performance engine.

5.0 out of 5 stars ( 1 )

$21.95

—

$224.95

S&S Cycle Billet Oil Pumps

S&S Cycle billet oil pumps are designed and built for your V-Twin. They feature a smoother design from beautiful strong billet and pressure relief towers that are .300 in. shorter than your OEM oil pump. Kits may include: * Pump with cover * Mounting bolts * Supply and return gears * Driveshaft with keys and snap rings * Check ball and spring * Pressure relief valve and spring * Check ball and release valve cover screws with O-rings * Miscellaneous hose fittings, plugs, screws, and gaskets

Not Yet Reviewed

$445.95

—

$499.95

S&S Cycle Breather Reed Valve Assemblies

S&S Cycle breather reed valve assemblies improve oil scavenging and reduce oil carryover. Plus, they'll make your bike run better. The steel breather reeds of these valve assemblies are normally closed. As they open and close again during the stroke cycle, a slight vacuum is maintained in the crankcase, greatly improving oil scavenging. Enjoy your riding experience even more after you install S&S Cycle breather reed valve assemblies.

Not Yet Reviewed

$165.95

S&S Cycle Super Stock Cylinder Head Kits

S&S Cycle Super Stock cylinder head kits feature stock-appearing cylinder heads with improved performance. These heads work well with engines of stock displacement but are ideal for engines with a little larger stroke or bore. They are compatible with stock rocker boxes, intake manifolds, and exhaust. The S&S high-performance valve springs allow for camshafts with larger lifts. Super Stock aluminum cylinder head kits are available in multiple finishes depending on application and they contain all the parts needed for installation except where noted.

Not Yet Reviewed

$1,699.95

—

$2,149.95

S&S Cycle Quickee Adjustable Pushrods

Easily installed, easily removed--S&S Cycle Quickee adjustable pushrods are designed for a simple, trouble-free installation that does not require removal of the gas tank, rocker assemblies, or even the rocker box cover! Innovative Quickees feature threaded adjusters that screw into the pushrods until the threads disengage and the adjuster simply slides into the pushrods, making your installation or removal easy. Then, once the pushrods are installed and adjusted, the locknut keeps the adjuster from moving. They will work with stock and aftermarket cams, as well as stock pushrod covers. S&S proven performance makes life easier with their Quickee adjustable pushrods.

1.0 out of 5 stars ( 1 )

$209.95

—

$336.95

S&S Cycle Precision Tappets

S&S Cycle precision tappets are high performance replacements for S&S Cycle's previous standard and premium lifters for M8, Twin Cams, and late Sportster applications. Each precision tappet is hand assembled to exacting tolerances and designed for quiet operation and rapid pump up. Features and benefits: * Reduced valve train noise from start-up to shut down * Close tolerances for low leak-down rates * Fast pump up and superior high-rpm performance

Not Yet Reviewed

$279.95

S&S Cycle Hi-4N Ignitions

S&S Cycle Hi-4N ignitions are one-piece machined aluminum housings that reduce vibration and improve heat dissipation and reliability. Features: * Improved kick-start algorithm designed to start as easily as points * BCD switches with solid detent * Legible markings allow easy and repeatable adjustments of mode, advance rate, and rev limit * Single-fire and dual-fire function built into a single module * Flexible wiring harness makes installation easier

Not Yet Reviewed

$411.95

—

$599.95

S&S Cycle Standard Adjustable Pushrods

S&S Cycle standard adjustable pushrods help to assure consistent valvetrain operation under all conditions. The pushrods are made from rigid chromoly steel tubing and offer a simple, trouble-free installation. You can purchase just the pushrods or as a set with pushrod covers, O-rings, and cover keepers. Replace the stock, non-adjustable pushrods in your stock or high performance application with S&S Cycle standard adjustable pushrods, available for a wide range of Harley-Davidson® bikes from 1984 and up.

5.0 out of 5 stars ( 1 )

$152.95

—

$249.95

S&S Cycle V-Series Engine Gasket Kits

Whether you are rebuilding a classic or attempting to eliminate a mysterious leak, S&S Cycle V-series engine gasket kits will help you get that new-seal feel that your ride deserves. Their kits are available in various sets, allowing you to do as much or as little as you desire. No matter the project, you can find the gaskets for the job in S&S kits. They are available for various models and in varying engine level kits to fit any cycle application you wish to tackle.

Not Yet Reviewed

$94.95

—

$239.95

S&S Cycle Compression Release Assemblies

.S&S Cycle compression release assemblies can help you service and maintain your Harley-Davidson® Big Twin. These replacement parts enable you to buy just the components you need, not an entire new compression release kit.

Not Yet Reviewed

$193.95

S&S Cycle Super Stock Generator-Style Crankcases

S&S Cycle Super Stock generator-style crankcases for Big Twin engines with stock bores are designed with a stock-like appearance and incorporate updated design features that improve overall engine strength and reliability. Select the crankcase to fit your engine. Features and benefits: * Pre-clearance for strokes up to and including 5 in. * Motor mounts on crankcases for knucklehead engines are machined to fit stock 1936-47 frames. An adapter plate is included for 1948 and later-style frames * All cases are designed for late style generator, two brush type with 5/16 in. mounting bolts to eliminate early generator cradle/mounting strap bosses for simplicity and economics * Timken sprocket shaft main bearing, in all years, instead of stock-straight roller bearings; resulting in better flywheel assembly stability, placement and longer engine life * Kits include crankcase assembly, all required hardware and bearings for installation Note: All S&S crankcases use Timken style sprocket shaft bearings and 1958 and later pinion bearings. These cases will not accept stock 1957 and earlier flywheel assemblies.

Not Yet Reviewed

$2,195.95

Not Yet Reviewed

$1,643.95

HARLEY-DAVIDSON S&S Cycle Parts and Accessories