HARLEY-DAVIDSON FXSTDSE2 SCREAMIN EAGLE SOFTAIL DEUCE 2 S&S Cycle

S&S Cycle Early Twin Cam Chain Drive Cam Chest Upgrade Kits

S&S Cycle early Twin Cam chain drive cam chest replacement kits are designed to upgrade your early 1999-2006 Twin Cam to 2007-16 style camshafts and oil pump. Your engine will receive increased performance from the higher lifts, optimized camshaft timing, and from more consistent oil flow and pressure. Kits can be installed without the removal of your rocker box covers. Order the kit recommended for your specific Harley-Davidson© street bike. Kit components include: * Forged cam plate * Forged 3-stage oil pump * Premium lifters * Hydraulic chain tensioners * Inner and outer camshaft bearings * Quickee pushrods * Pushrod tubes * Available with or without chain drive camshafts * All necessary gaskets, O-rings, and hardware

Not Yet Reviewed

$1,712.70

—

$1,924.95

S&S Cycle Street Performance .585 Valve Spring Kits

S&S Cycle offers Street Performance .585 in. valve spring kits to upgrade your bike's performance—so you don't have just another "me too" motorcycle. Order the valve spring kit designed for your make and model. Features and specifications: * Available for fitment on a variety of Harley-Davidson® and Buell models * Kit contains springs, top and bottom collars, keepers, and shims * Accommodates camshaft lift to 0.585 inches * Suitable for high performance applications * Coil springs reduce the risk of valve float

Not Yet Reviewed

$163.99

S&S Cycle Rocker Cover Gasket Kits

Rocker covers were born of necessity--to keep oil in and dirt out of the rocker arm, ensuring that the intake and exhaust valves operate efficiently. S&S Cycle rocker cover gasket kits help seal the joint between the rocker cover and the rest of the engine, thus preventing leaks. Choose the S&S Cycle rocker cover gasket kits for your powersports vehicles dating from the 1960s through today.

Not Yet Reviewed

$71.99

—

$144.95

S&S Cycle Roller Rocker Arms

S&S Cycle roller rocker arms were designed for superior strength and to eliminate the failure-prone stress areas found in other rockers. These replacement arms are forged from 8620 steel, heat-treated, and then shot-peened for additional strength. They feature 3/4 in. long bronze bushings, compared to the more common 1/2 in. long bushings or needle bearings. S&S Cycle roller rocker arms are available in 1.500:1 ratio, 1.625:1 ratio and 1.725:1 ratio. Order the set recommended for your bike model.

Not Yet Reviewed

$649.95

S&S Cycle Pushrod Cover Cap Springs

S&S Cycle offers pushrod cover cap springs for a wide range of Harley-Davidson© street bikes from 1936 and up. These OE-style replacements are machined from factory materials and specs to ensure proper fitment and performance. The springs are an original part of S&S adjustable pushrod cover kits (P/N 17947-36).

Not Yet Reviewed

$7.95

S&S Cycle Early Twin Cam Chain Drive Camshaft Kits

S&S Cycle Early Twin Cam chain drive camshaft kits are an affordable way to increase performance. These kits allow you to reuse many stock cam drive components, saving you money on parts. Complete kits include the cams, gear cover gasket, cam bearings, and instructions. Go with the less expense and more performance of S&S Cycle Early Twin Cam chain drive camshaft kits.

Not Yet Reviewed

$399.95

—

$418.95

S&S Cycle Time-Saver Adjustable Pushrods

S&S Cycle time-saver adjustable pushrods eliminate the need to disassemble the top end and remove the rocker arms to change pushrods or camshafts, reducing installation time by up to 75 percent. S&S Cycle time-saver adjustable pushrods feature larger 9mm diameter chromoly tubing that provides superior strength and minimizes pushrod flex. The single adjuster end provides pushrod lengths from 9.5 to 11.5 in. for stock height and taller engines. Select the pushrods designed for your motorcycle.

Not Yet Reviewed

$214.95

S&S Cycle Cam Chain Tensioners

S&S Cycle offers you superior valve train control for your motorcycle with their cam chain tensioners. They provide a thicker shoe, a larger piston, direct chain oiling, and tighter tolerances for improved stability and longer wear life over the stock cam chain tensioners. Order the S&S cam chain tensioners designed for your bike.

Not Yet Reviewed

$175.99

S&S Cycle Throttle Cable Guides

Set up your Big Twin with S&S Cycle throttle cable guides. These chrome plated steel components are available in two styles to fit CV and non-CV carburetors. Route your cables properly and professionally with S&S Cycle throttle cable guides.

Not Yet Reviewed

$40.95

S&S Cycle Rocker Cover Seals

S&S Cycle rocker cover seals are created from premium materials for exceptional durability and leak-free performance. They are available to fit S&S rocker boxes. Select the gasket needed for your motorcycle.

Not Yet Reviewed

$19.99

S&S Cycle Early Twin Cam Easy Start Chain Drive Camshaft Kits

S&S Cycle Early Twin Cam Easy Start chain drive camshaft kits offer more performance for less money and more time to enjoy riding. These kits allow your stock starter to start any engine. Plus, some kits reuse stock components and can be used with stock valve springs. Most Easy Start kits include the cams, gear cover gasket, cam bearings, and instructions. Installation doesn't take long and S&S offers many choices to meet your engine size and compression ratio. An easier way to increase performance without emptying your wallet--S&S Cycle Early Twin Cam Easy Start chain drive camshaft kits.

Not Yet Reviewed

$540.95

S&S Cycle Early Twin Cam Gear Drive Camshaft Kits

Step up the performance of your Twin Cam with affordable S&S Cycle Early Twin cam gear drive camshaft kits. Some kits allow you to use stock springs, and the complete kits include a gear drive camshaft set and inner gears, an outer cam drive gear kit, and a camshaft installation kit. Performance doesn't have to leave you with empty pockets. S&S Cycle Early Twin Cam gear drive camshaft kits can save you time and money, while providing the added power that you want.

Not Yet Reviewed

$948.95

S&S Cycle Outer Camshaft Ball Bearings

S&S Cycle outer camshaft ball bearings are high-strength, precision-made OEM replacements for the stock camshaft outer bearings that mount in cam plates of specific Big Twin engines. Recommended when installing cams, they will provide the proper fit and performance, just like the originals they are replacing.

Not Yet Reviewed

$18.99

S&S Cycle 97 in. Big Bore Kits

S&S Cycle 97 in. big bore kits will increase the displacement of 88 in. engines to 97 in., are easy to install, and require no machining or re-balancing. Using an 11-fin design, these pre-finished cylinders closely resemble the OEM shape and are ready to install. Order an S&S Cycle 97 in. big bore kit—and take your stock engine case as big as it'll go! Features of the S&S Cycle 97 in. big bore kits: * The 97 in. big bore kits for 88 in. motors yield excellent results with stock cylinder heads * Feature the same silver or black wrinkle powder-coat as stock, so they match the stock finish of the engine * Specifications: 3.927 in. bore, 4 in. stroke, 97 in. displacement, and 9.7:1 compression ratio with stock heads (9.3:1 compression ratio with S&S 89cc heads or 10.7:1 with S&S 79cc heads) * Feature the largest bore (3.927 in.) that can safely be used in a cylinder with stock spigot diameter * Included S&S cylinders feature a much stronger cast iron liner to stand up to the added power * Easy installation: no need to bore or split existing cases, just swap the cylinders *Kit includes cylinders, pistons, rings and gaskets (head, base and exhaust) * For best performance, appropriate camshafts, performance air cleaner, performance exhaust and fuel system tuning is required

Not Yet Reviewed

$1,287.95

S&S Cycle Early Twin Cam Easy Start Gear Drive Camshaft Kits

S&S Cycle Early Twin Cam Easy Start gear drive camshaft kits offer more performance for less money, and more time to enjoy riding. The Easy Start kits allow your stock starter to start any engine and most can be used with stock valve springs. Plus, they are designed to greatly improve valve timing accuracy by eliminating timing chain lash. Twin Cam kits include cams with inner gears and installation kits. Installation doesn't take long and S&S offers many choices to meet your engine size and compression ratio. Here's an easier way to increase performance without emptying your wallet--S&S Cycle Early Twin Cam Easy Start gear drive camshaft kits.

Not Yet Reviewed

$1,070.95

S&S Cycle Standard Adjustable Pushrods

S&S Cycle standard adjustable pushrods help to assure consistent valvetrain operation under all conditions. The pushrods are made from rigid chromoly steel tubing and offer a simple, trouble-free installation. You can purchase just the pushrods or as a set with pushrod covers, O-rings, and cover keepers. Replace the stock, non-adjustable pushrods in your stock or high performance application with S&S Cycle standard adjustable pushrods, available for a wide range of Harley-Davidson® bikes from 1984 and up.

5.0 out of 5 stars ( 1 )

$152.95

—

$249.95

S&S Cycle Super G Manifolds

S&S Cycle Super G manifolds are available in several options. They may have provisions for VOES lines and MAP sensors (where applicable). Ensure balanced air distribution across the cylinders for better performance; select the Super G manifold designed for your engine.

Not Yet Reviewed

$195.95

S&S Cycle Custom Throttle Cables

S&S Cycle custom throttle cables are designed for use on any 2-cable carburetor installations on bikes with 1 in. O.D. handlebars. For proven performance, order the S&S Cycle custom throttle cables designed for your Harley-Davidson® model.

Not Yet Reviewed

$81.95

S&S Cycle 4 in. Sidewinder Big Bore Kits

Inspired by S&S Pro Stock drag race engines, S&S Cycle 4 in. Sidewinder big bore kits utilize a ductile cast iron liner wrapped in cast aluminum for optimum thermal conductivity and performance. These bolt-in kits do not require machining, re-balancing, or engine removal, and include just about everything you'll need to complete the installation. S&S Cycle 4 in. Sidewinder kits offer the biggest cylinder bore that can be installed in a stock crankcase without machining! Features: * Low-friction ductile cast iron liner * 10.5:1 compression * Bolts in with no machining, balancing, or splitting the crankcases * 88 in. engines are boosted to 100 in. * 96 in. and 103 in. engines are boosted to 110 in. * Complete kits include cylinders, pistons, gaskets, and instructions * Wrinkle black and silver cylinders that match stock finish

Not Yet Reviewed

$1,540.95

S&S Cycle Chain Drive Cam Installation Kits

S&S Cycle chain driven installation kits provide you with bearings, a gear cover gasket, and instructions. Complete your cam install correctly with the correct performance motorcycle parts for your American V-Twin from S&S Cycle.

Not Yet Reviewed

$164.95

S&S Cycle Super Stock Cylinder Head Kits

S&S Cycle Super Stock cylinder head kits feature stock-appearing cylinder heads with improved performance. These heads work well with engines of stock displacement but are ideal for engines with a little larger stroke or bore. They are compatible with stock rocker boxes, intake manifolds, and exhaust. The S&S high-performance valve springs allow for camshafts with larger lifts. Super Stock aluminum cylinder head kits are available in multiple finishes depending on application and they contain all the parts needed for installation except where noted.

Not Yet Reviewed

$1,795.95

S&S Cycle Head Bolt Kits

With S&S Cycle's wide selection of Harley-Davidson® parts, you're sure to find the parts you're looking for, including head bolt kits. These kits include steel 12-point head bolts and washers that are designed to exceed the needs of your high performance engine.

5.0 out of 5 stars ( 1 )

$142.95

S&S Cycle Super E and G Teardrop Air Cleaner Kits

S&S Cycle Super E and G Teardrop air cleaner kits offer trademark looks matched with performance. These kits feature S&S Cycle's classic teardrop covers, constructed from aluminum and chromed for great presentation. The specially design dimpled covers not only look good, but also feature directional air cones on the inside to create smooth paths of airflow. Plus, the uniquely designed back plates feature air horn style radiused entryways to reduce turbulence. You'll have an efficient, easy path for intake air to follow into your carburetor. Maximize airflow, possibly add a few horses, and definitely add timeless style with S&S Cycle Super E and G Teardrop air cleaner kits.

Not Yet Reviewed

$395.95

S&S Cycle Oil Filters

S&S Cycle oil filters are constructed out of a sturdy steel canister, which houses the finest filtering media and internal components available. The filter media has traps to catch the smallest particles possible but not restrict flow. The filters are available in a black or chrome finish to accent your ride properly. With S&S Cycle oil filters you'll keep your oil clean and your engine protected.

4.5 out of 5 stars ( 2 )

$183.95

HARLEY-DAVIDSON FXSTDSE2 SCREAMIN EAGLE SOFTAIL DEUCE 2 S&S Cycle Parts and Accessories