Selected Filters


Loading...

Availability


HARLEY-DAVIDSON FXR3 S&S Cycle Parts and Accessories

Part Groups

Results 1 - 24 of 46

S&S Cycle Super E and G Air Cleaner Back Plates

S&S Cycle offers replacement back plates for the S&S air cleaner on your Super E or G carburetor. These accessories are made of a high-quality aluminum with a chrome plated finish for looks and performance. The back plates are available for nearly a hundred Harley-Davidson® bike applications from 1991 and up.

Not Yet Reviewed

$66.76

S&S Cycle Hi-4N Ignitions

S&S Cycle Hi-4N ignitions are one-piece machined aluminum housings that reduce vibration and improve heat dissipation and reliability. Features: * Improved kick-start algorithm designed to start as easily as points * BCD switches with solid detent * Legible markings allow easy and repeatable adjustments of mode, advance rate, and rev limit * Single-fire and dual-fire function built into a single module * Flexible wiring harness makes installation easier

Not Yet Reviewed

$411.95

—

$539.96

S&S Cycle Cylinder Studs

S&S Cycle cylinder studs are the perfect replacement for your OEM or S&S cases. These steel head studs are black oxide coated and strong enough to use on the largest of V-twin engines. So next time you do a top end on your Harley-Davidson®, update those head studs with S&S cylinder studs.

5.0 out of 5 stars ( 1 )

$89.96

S&S Cycle Street Performance .585 Valve Spring Kits

S&S Cycle offers Street Performance .585 in. valve spring kits to upgrade your bike's performance—so you don't have just another "me too" motorcycle. Order the valve spring kit designed for your make and model. Features and specifications: * Available for fitment on a variety of Harley-Davidson® and Buell models * Kit contains springs, top and bottom collars, keepers, and shims * Accommodates camshaft lift to 0.585 inches * Suitable for high performance applications * Coil springs reduce the risk of valve float

Not Yet Reviewed

$163.99

S&S Cycle V-Series Engine Gasket Kits

Whether you are rebuilding a classic or attempting to eliminate a mysterious leak, S&S Cycle V-series engine gasket kits will help you get that new-seal feel that your ride deserves. Their kits are available in various sets, allowing you to do as much or as little as you desire. No matter the project, you can find the gaskets for the job in S&S kits. They are available for various models and in varying engine level kits to fit any cycle application you wish to tackle.

Not Yet Reviewed

$116.95

—

$224.95

S&S Cycle Roller Rocker Arms

S&S Cycle roller rocker arms were designed for superior strength and to eliminate the failure-prone stress areas found in other rockers. These replacement arms are forged from 8620 steel, heat-treated, and then shot-peened for additional strength. They feature 3/4 in. long bronze bushings, compared to the more common 1/2 in. long bushings or needle bearings. S&S Cycle roller rocker arms are available in 1.500:1 ratio, 1.625:1 ratio and 1.725:1 ratio. Order the set recommended for your bike model.

Not Yet Reviewed

$649.95

S&S Cycle Pushrod Cover Cap Springs

S&S Cycle offers pushrod cover cap springs for a wide range of Harley-Davidson© street bikes from 1936 and up. These OE-style replacements are machined from factory materials and specs to ensure proper fitment and performance. The springs are an original part of S&S adjustable pushrod cover kits (P/N 17947-36).

Not Yet Reviewed

$7.95

S&S Cycle Super E and G Teardrop Air Cleaner Kits

S&S Cycle Super E and G Teardrop air cleaner kits offer trademark looks matched with performance. These kits feature S&S Cycle's classic teardrop covers, constructed from aluminum and chromed for great presentation. The specially design dimpled covers not only look good, but also feature directional air cones on the inside to create smooth paths of airflow. Plus, the uniquely designed back plates feature air horn style radiused entryways to reduce turbulence. You'll have an efficient, easy path for intake air to follow into your carburetor. Maximize airflow, possibly add a few horses, and definitely add timeless style with S&S Cycle Super E and G Teardrop air cleaner kits.

Not Yet Reviewed

$395.95

S&S Cycle Exhaust Gaskets

S&S Cycle exhaust gaskets are offered in a variety of styles to fit countless Harley-Davidson® applications. Whether your original seal needs replaced or you're installing a new aftermarket exhaust system, these gaskets will help control unwanted noise and fume leaks--delivering long-lasting performance. Order the model recommended for your bike.

Not Yet Reviewed

$8.99

S&S Cycle Magnetic Drain Plugs

Metal particles suspended in oil can ruin an engine, transmission, and primary. Catch the remaining floating metal fragments by using S&S Cycle magnetic drain plugs, and save your drivetrain. Although it's the job of the oil filter to contain the majority of particles in your oil, in some cases they still circulate when they are microscopic. S&S Cycle magnetic drain plugs will recover those specks and keep your engine clean..

5.0 out of 5 stars ( 2 )

$15.95

S&S Cycle Rocker Cover Gasket Kits

Rocker covers were born of necessity--to keep oil in and dirt out of the rocker arm, ensuring that the intake and exhaust valves operate efficiently. S&S Cycle rocker cover gasket kits help seal the joint between the rocker cover and the rest of the engine, thus preventing leaks. Choose the S&S Cycle rocker cover gasket kits for your powersports vehicles dating from the 1960s through today.

Not Yet Reviewed

$91.95

S&S Cycle Standard Forged Rocker Arms

S&S Cycle standard forged rocker arms are designed for superior strength and to eliminate the failure-prone stress areas found in other rockers. These replacement arms are forged from 8620 steel, heat-treated, and then shot-peened for additional strength. They feature 3/4 in. long bronze bushings, compared to the more common 1/2 in. long bushings or needle bearings. S&S Cycle roller arms are available in the stock 1.625:1 ratio and 1.725:1 ratio. Order the set recommended for your bike model.

Not Yet Reviewed

$84.95

—

$334.95

S&S Cycle Breather Reed Valve Assemblies

S&S Cycle breather reed valve assemblies improve oil scavenging and reduce oil carryover. Plus, they'll make your bike run better. The steel breather reeds of these valve assemblies are normally closed. As they open and close again during the stroke cycle, a slight vacuum is maintained in the crankcase, greatly improving oil scavenging. Enjoy your riding experience even more after you install S&S Cycle breather reed valve assemblies.

Not Yet Reviewed

$160.99

S&S Cycle Exhaust Flange Hardware

When upgrading your exhaust or replacing old fasteners on your motorcycle, S&S Cycle offers a variety of exhaust flange hardware to secure critical components for riding, jumping, or racing on any terrain.

Not Yet Reviewed

$19.99

S&S Cycle Sprocket Shaft Oil Seals

S&S Cycle sprocket shaft oil seals are small important components to prevent engine oil from leaking out of the transmission housing where the shaft rotates through the case. Prevent leaks by servicing your motorcycle engine with S&S sprocket shaft seals.

Not Yet Reviewed

$14.99

—

$61.95

S&S Cycle Throttle Cable Guides

Set up your Big Twin with S&S Cycle throttle cable guides. These chrome plated steel components are available in two styles to fit CV and non-CV carburetors. Route your cables properly and professionally with S&S Cycle throttle cable guides.

Not Yet Reviewed

$40.95

S&S Cycle Rocker Cover Seals

S&S Cycle rocker cover seals are created from premium materials for exceptional durability and leak-free performance. They are available to fit S&S rocker boxes. Select the gasket needed for your motorcycle.

Not Yet Reviewed

$19.99

S&S Cycle Evolution Camshafts

Do you feel like your high-mileage EVO Big Twin engine has lost its gusto? S&S Cycle Evolution camshafts can to tap in to the hidden potential of your motorcycle's engine. So, what can you expect after the upgrade? For starters, you can expect higher lift and increased valve timing for better performance! S&S cams are made in-house to quality standards and come in various compression ratios to meet your engine needs. S&S Cycle Evolution cams are performance-driven, easy to install, and affordable!

Not Yet Reviewed

$255.95

S&S Cycle Forged Piston and Ring Kits

S&S Cycle forged piston and ring kits include your rings, piston pin, and circlips. S&S Cycle has many years of experience producing quality pistons for motorcycles. These piston kits provide strong, lightweight pistons with optimized designs that improve engine efficiency and maximize your torque and throttle response.

5.0 out of 5 stars ( 1 )

$484.95

S&S Cycle Standard Adjustable Pushrods

S&S Cycle standard adjustable pushrods help to assure consistent valvetrain operation under all conditions. The pushrods are made from rigid chromoly steel tubing and offer a simple, trouble-free installation. You can purchase just the pushrods or as a set with pushrod covers, O-rings, and cover keepers. Replace the stock, non-adjustable pushrods in your stock or high performance application with S&S Cycle standard adjustable pushrods, available for a wide range of Harley-Davidson® bikes from 1984 and up.

5.0 out of 5 stars ( 1 )

$152.95

S&S Cycle Head Gaskets

S&S Cycle head gaskets are constructed from premium materials, such as micropore and copper, for quality sealing performance. Sold in convenient multi-packs, the gaskets are available in a variety of thicknesses and bore configurations for fitment on Harley-Davidson® models. Match up your bike with the correct S&S head gaskets to ensure leak-proof operation.

Not Yet Reviewed

$35.95

S&S Cycle V-Series Long Block Engines

Why rebuild that old stock Evo engine? Just replace it with S&S Cycle V-Series long block engines. These engines will save you unwanted down time and money by using your existing fuel or aftermarket ignition system. Tuning your carburetor or EFI system will be required, but definitely worth the extra effort. S&S Cycle V-Series long block engines are built using genuine S&S components, so you know this motor is built to last.

Not Yet Reviewed

$7,099.95

—

$7,999.95

S&S Cycle Billet Oil Pumps

S&S Cycle billet oil pumps are designed and built for your V-Twin. They feature a smoother design from beautiful strong billet and pressure relief towers that are .300 in. shorter than your OEM oil pump. Kits may include: * Pump with cover * Mounting bolts * Supply and return gears * Driveshaft with keys and snap rings * Check ball and spring * Pressure relief valve and spring * Check ball and release valve cover screws with O-rings * Miscellaneous hose fittings, plugs, screws, and gaskets

Not Yet Reviewed

$499.95

S&S Cycle Oil Pump Gasket Rebuild Kits

S&S Cycle oil pump gasket rebuild kits have what you need to keep your S&S oil pump in good working order. Whether your pump is high pressure or standard, S&S Cycle oil pump gasket rebuild kits will be a perfect fit. The kits include key and retaining ring.

Not Yet Reviewed

$15.99