Availability
Summit Bucks
Russell stainless steel braided fuel hose kits are quality-engineered to replace stock fuel hoses and come to you complete and ready to run. Their stainless steel outer braid is built tough to resist abrasion and corrosion and the kits are designed with anodized aluminum hose ends. Best of all, they easily connect to OE components for a very professional and reliable installation that lasts!
( 30 )
$21.95
—
$59.95
Summit Bucks
These Russell ProClassic II dual fuel inlet kits feature an all-black, nylon fiber braided outer cover over a chlorinated polyethylene (CPE) synthetic rubber inner line for abrasion resistance. The CPE inner liner incorporates a bonded, multi-braid stainless wire that improves the bend radius with less possibility of collapsing when the routing hoses are in tight areas. They are safe for use with fuel, oil, and antifreeze. To complement this new hose, the ProClassic II dual fuel inlet kits also feature aluminum black anodized hose ends. If a high-quality, traditional looking hose is what you're seeking, Russell ProClassic II dual fuel inlet kits are the answer.
( 9 )
$54.95
Summit Bucks
Since 1975, Russell Full Flow hose ends have been the choice of champions. Their unique taper design revolutionized hose assembly by not cutting into the inner hose liner, yet providing a positive grip on the hose to eliminate leakage or separation. They come available in several sizes and styles for any plumbing job.
( 361 )
$19.95
—
$33.95
Summit Bucks
Russell's dual fuel inlets for Holley and Demon carburetors are fully assembled and ready for installation. They feature stainless steel braided hose construction with anodized AN fittings and fuel bowl washers.
( 35 )
$54.95
—
$105.95
Summit Bucks
Russell AN to NPT adapter fittings are the third and final step to completing your hose assembly. The AN side of the fittings uses a 37 degree sealing angle that guarantees a positive seal at maximum operating pressures. These fittings are available in straight, 45 degree, and 90 degree styles. They come in your choice of blue anodized aluminum, "Endura" nickel plated aluminum, or stainless steel.
( 96 )
$6.95
—
$24.95
Summit Bucks
Russell dual fuel inlets for Holley and Demon carburetors are fully assembled and ready for installation. They feature lightweight Russel ProClassic hose construction with black anodized AN fittings, and fuel bowl washers.
( 25 )
$63.95
—
$64.95
Summit Bucks
Russell Transmission fittings are designed to replace OEM adapters in TH350, TH400, 700R4, 4L80 and additional applications that utilize 1/4" NPSM threads. This will allow you to connect your braided line to your transmission case without cracking your transmission case . Available in -6 AN and -8 AN fittings.
( 56 )
$12.95
PowerFlex Endura brake hose ends are made for use with PowerFlex brake line hose. They're manufactured from high-quality alloy steel. This provides the additional strength required to guarantee a quality high-pressure hose assembly.
( 6 )
$16.95
—
$19.95
Summit Bucks
Install remote mounted fuel or oil gauges in a snap with Russell gauge fitting kits. These gauge kits include lightweight aluminum block adapters and gauge adapters, plus 6 ft. hose assemblies crafted from braided stainless steel. Get connected for precise gauge readings with the right fittings--fuel and oil gauge fittings from Russell Performance.
( 15 )
$48.95
Summit Bucks
Replace your original fuel lines with Russell Performance pre-fitted fuel pump to carburetor kits. These universal, easy-to-install kits are available for several applications. Russel fuel hose kits include big bore carb bowl fittings, fuel pump adapters, two aluminum, red/blue anodized full flow hose ends and a pre-cut length of ProFlex braided hose. Do your plumbing right with Russell pre-fitted fuel pump to carburetor kits.
( 10 )
$39.95
—
$61.95
Summit Bucks
For the enthusiast looking for a quality performance hose, while also wanting to save assembly time and money, Russell Twist-Lok hose is the way to go. Easy to assemble, flexible and lightweight, it is ideal for most automotive applications where a stainless steel braided line is not necessary. This synthetic rubber hose is pressure-rated up to 250 psi and suitable for most fuel and oil systems. It's available in a variety of lengths, diameters, colors, and AN sizes.
( 52 )
$35.95
—
$2,003.99
Summit Bucks
Tube sleeves from Russell will make the installation of aftermarket steel or aluminum line to your factory hard lines a snap, saving you time and money. They are manufactured from aerospace aluminum and come available in either a protective anodized blue or new Endura finish.
( 14 )
$2.95
—
$10.95
Summit Bucks
Russell ProClassic carburetor adapter fittings are the third and final step to completing your hose assembly. The AN side of the fittings uses a 37 degree sealing angle that guarantees a positive seal at maximum operating pressures. They feature aluminum construction that has been black anodized for protection against corrosion. Adapt to any situation with one of these Russell ProClassic adapter fittings.
( 21 )
$9.95
—
$16.95
Russell brake adapter fittings are manufactured from quality steel for strength and durability. They are available in several styles to suit all of your brake system needs.
( 165 )
$6.95
—
$12.95
Summit Bucks
Russell Endura Full Flow hose ends duplicate the look of stainless steel without the expense. They feature extreme corrosion resistance, along with Russell's unique taper design. This design does not cut into the inner hose liner, for true reusability, and yet the ends provide a positive grip on the hose to eliminate leakage or separation, making them the choice of racing champions. They come available in several sizes and styles for any plumbing job.
( 47 )
$19.95
—
$20.95
Summit Bucks
Don't take chances. Russell carburetor inlet fittings are designed to ensure the reliability required in your fuel system. They're made in an assortment of designs to adapt AN-style hose to most carburetor inlets, as well as a number of fuel injection systems.
( 52 )
$7.95
—
$20.95
Summit Bucks
Russell aluminum fuel lines are an economical way to finish any performance fuel system. They're easy to form and come available in popular sizes to complement any street machine.
( 8 )
$68.95
Summit Bucks
Russell aluminum couplers are not only handy, but are offered in several great finishes--blue anodized, chrome, or Endura bright plated--to give your plumb job style to match their performance. Russell couplers are available for both AN and NPT thread applications.
( 80 )
$7.95
—
$14.95
Summit Bucks
This new Russell ProClassic hose is designed for racers and performance enthusiasts who want high-quality plumbing that is lighter and easier to assemble than traditional braided stainless steel hose. It features a lightweight nylon fiber braid over a durable synthetic rubber core with a maximum pressure rating of 350 psi. Russell ProClassic hose is capable of handling nearly every plumbing task on your vehicle and is safe for water, oil, and antifreeze. The hose is easy to cut, making for quick, easy assembly. Available in a variety of hose sizes and lengths, this Russell ProClassic hose can be used in many different areas.
( 68 )
$41.95
—
$2,537.99
Summit Bucks
Not only do you have a wide selection of different-sized Russell AN and NPT pipe thread reducers to choose from, but you also have a choice of finishes. You can get your aluminum reducers with the traditional blue anodized finish or with Russell's exclusive Endura finish, a very bright finish that resists corrosion.
( 25 )
$5.95
—
$19.95
Summit Bucks
Don't take chances. Russell AN to inverted flare fittings are designed to ensure the reliability required in your plumbing project. They're made in an assortment of designs to adapt AN-style fittings to a wide range of inverted flare applications.
( 78 )
$10.95
Summit Bucks
Russell AN flare caps prevent dirt and debris from entering externally threaded hose fittings and adapters. They are available in molded red plastic, anodized aluminum, and aluminum Endura nickel plated finishes. Protect your AN fittings by using one of the Russell AN flare caps.
( 25 )
$9.95
Summit Bucks
For high-pressure brake lines, Russell PowerFlex hoses are the preferred choice. When used in conjunction with PowerFlex hose ends, the end result is a durable and professional hose that resists leaks, providing years of service. With a PTFE inner liner featuring 308 stainless steel braid, and a 2,500 psi rating, what more can you ask for?
( 44 )
$51.95
—
$104.95
Summit Bucks
Russell AN to metric adapter fittings use a 37 degree sealing angle on the AN side, which guarantees a positive seal at maximum operating pressures. These adapters are available for a variety of AN hose and metric thread sizes.
( 104 )
$7.95
—
$14.95
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
