Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
Availability
Russell Twist-Lok Hose Ends
These Russell reusable hose ends utilize barb technology. They're 40 percent lighter than conventional hose ends because they're constructed of aluminum. Twist-Lok hose ends work with any Russell AN adapters and carb fittings, and are easy to assemble and disassemble.
( 67 )
$7.95
—
$8.95
Russell ProClassic AN to NPT Adapter Fittings
Russell ProClassic AN to NPT adapter fittings are the third and final step to completing your hose assembly. The AN side of the fittings uses a 37 degree sealing angle that guarantees a positive seal at maximum operating pressures. These fittings are available in straight, 45 degree, and 90 degree styles. They feature aluminum construction that has been black anodized for protection against corrosion. Adapt to any situation with one of these Russell ProClassic fittings.
( 37 )
$4.95
—
$8.95
Russell AN to NPT Adapter Fittings
Russell AN to NPT adapter fittings are the third and final step to completing your hose assembly. The AN side of the fittings uses a 37 degree sealing angle that guarantees a positive seal at maximum operating pressures. These fittings are available in straight, 45 degree, and 90 degree styles. They come in your choice of blue anodized aluminum, "Endura" nickel plated aluminum, or stainless steel.
( 99 )
$4.95
—
$8.95
Russell ProClassic Couplers
Russell ProClassic couplers help you to adapt your hose size to any situation. They are manufactured from aluminum and are black anodized for protection against corrosion. Available in different AN sizes, these Russell ProClassic couplers are perfect for your race car, street machine, or off-road vehicle.
( 21 )
$6.95
—
$8.95
Russell Barb to Male AN Fittings
Plumb your fuel system the easy way with Russell barb to male AN fittings. Simply thread the AN portion of the fitting into a hose end, and slide the proper size hose over the barb end with a clamp to secure it. Not only will they save you both time and money, their blue anodized finish will dress up your engine, too!
( 3 )
$6.95
—
$8.95
Russell AN to Metric Adapter Fittings
Russell AN to metric adapter fittings use a 37 degree sealing angle on the AN side, which guarantees a positive seal at maximum operating pressures. These adapters are available for a variety of AN hose and metric thread sizes.
( 104 )
$7.95
—
$9.95
Russell AN Flare Caps
Russell AN flare caps prevent dirt and debris from entering externally threaded hose fittings and adapters. They are available in molded red plastic, anodized aluminum, and aluminum Endura nickel plated finishes. Protect your AN fittings by using one of the Russell AN flare caps.
( 25 )
$8.95
—
$9.95
Russell Reducers
Not only do you have a wide selection of different-sized Russell AN and NPT pipe thread reducers to choose from, but you also have a choice of finishes. You can get your aluminum reducers with the traditional blue anodized finish or with Russell's exclusive Endura finish, a very bright finish that resists corrosion.
( 26 )
$3.95
—
$9.99
Russell ProClassic Plugs
Russell ProClassic plugs help you to plug off any open-threaded hole. They are manufactured from aluminum and are black anodized for protection against corrosion. Available in different AN sizes, these Russell ProClassic plugs are perfect for your race car, street machine, or off-road vehicle.
( 2 )
$7.95
—
$8.95
Russell ProClassic AN Cap Fittings
Russell ProClassic AN cap fittings use a 37 degree sealing angle that guarantees a positive seal at maximum operating pressures. They feature aluminum construction that has been black anodized for protection against corrosion.
( 7 )
$8.95
—
$9.95
Russell Couplers
Russell aluminum couplers are not only handy, but are offered in several great finishes--blue anodized, chrome, or Endura bright plated--to give your plumb job style to match their performance. Russell couplers are available for both AN and NPT thread applications.
( 82 )
$4.95
—
$9.99
Russell Bulkhead Nuts
Secure your bulkhead fittings into position the right way with these bulkhead nuts from Russell. They're available in your choice of blue anodized aluminum or corrosion-resistant Endura finish steel.
( 7 )
$5.95
—
$7.95
Russell Tube Seal Hose Clamps
Russell's Tube Seal hose clamps are designed to provide a finished hose end appearance with the ease of a hose clamp. The clamps come in chrome or a number of anodized finishes in a variety of sizes.
( 14 )
$4.95
—
$8.95
Russell Bulkhead Adapter Fittings
Don't let firewalls, panels, and other stuff keep you from getting your lines where they need to go. Connect 'em with these aluminum Russell bulkhead adapters, which are available in straight, 45 degree, and 90 degree versions in either blue anodized or "Endura" nickel plated finishes. You'll thank us for telling you about them.
( 14 )
$6.95
—
$8.95
Russell Plugs
These Russell plugs are the ticket for sealing open fittings or ports. These aluminum plugs are available in anodized blue or Russell's shiny Endura finish. They also come in several different sizes.
( 18 )
$2.95
—
$9.95
Russell 2-Piece Full Flow Swivel Hose End Sockets
Russell 2-piece Full Flow swivel hose end sockets feature the same polished and anodized look as their hose end companions, but are also available in red, purple, gray, orange, and black anodized finishes. This wide variety of socket color choices allows you to tailor the fuel system lines and plumbing to a specific look.
( 4 )
$5.95
—
$7.95
Russell NPT to Smooth Hose Adapters
If you have to connect a water line, oil cooler line, or some other form of conventional hose to a pipe thread fitting or boss, Russell has the solution you've been seeking. Their NPT to smooth hose adapters can do it for you in one fell swoop. They're made from quality aluminum to close tolerances and then given a bright anodized finish for good looks and corrosion protection.
( 14 )
$7.95
—
$9.95
Russell 2-Piece Full Flow Swivel Hose Ends
Russell's popular swivel hose ends are now available in a variety of color combinations to personalize any plumbing project. Their 2-piece full-flow swivel hose ends feature a blended 37 degree radius seat for optimum transition between hose ends and adapters. They are made from durable aluminum and feature a black anodized or polished mirror finish. These accessories swivel a full 360 degrees to allow for quick alignment of the hose end after assembly--and they're mandrel-bent, creating a smooth turn for superior flow.
( 2 )
$9.95
Russell Tube Sleeves
Tube sleeves from Russell will make the installation of aftermarket steel or aluminum line to your factory hard lines a snap, saving you time and money. They are manufactured from aerospace aluminum and come available in either a protective anodized blue or new Endura finish.
( 14 )
$4.95
—
$9.95
Russell ProClassic Tube Nuts
Russell 37 degree ProClassic tube nuts will make the installation of aftermarket steel or aluminum line to your factory hard lines a snap, saving you time and money. They are manufactured from aerospace aluminum and feature a black anodized finish for protection against corrosion. For no more hassling while trying to connect your hard line to braided hose, get one of these Russell ProClassic tube nuts. They'll get the job done and provide a leak-free seal every time.
( 7 )
$4.95
—
$6.95
Russell ProClassic Crimp Hose Ends
These Russell ProClassic crimp hose ends use push-together barb technology for quick hose pre-assembly. They are manufactured from the highest quality aluminum and are then black and clear anodized to give them a new high performance look. Russell ProClassic crimp hose ends use a swivel head design, allowing the fitting to rotate as you are tightening or assembling the hose, and a lightweight collar design. Choose between straight, 45 degree, or 90 degree configurations that are available in a variety of sizes to fit your specific hose diameter.
( 5 )
$7.95
—
$8.95
Russell Tube Nuts
Tube nuts from Russell will make the installation of aftermarket steel or aluminum line to your factory hard lines a snap, saving you time and money. They are manufactured from aerospace aluminum or steel and are available in either a protective anodized blue or a new Endura finish.
( 14 )
$4.95
—
$9.95
Russell ProClassic Carburetor Adapter Fittings
Russell ProClassic carburetor adapter fittings are the third and final step to completing your hose assembly. The AN side of the fittings uses a 37 degree sealing angle that guarantees a positive seal at maximum operating pressures. They feature aluminum construction that has been black anodized for protection against corrosion. Adapt to any situation with one of these Russell ProClassic adapter fittings.
( 21 )
$8.95
