Filters
The Detail Zone Telorvek Ford 5.0 Coyote EFI wiring harnesses make wiring your project easier. These wiring kits come with all of the sensor connections pre-installed on color-coded and printed wire, which attaches to the engine and transmission using the factory ECM. TDZ Telorvek harnesses create an exceptionally neat installation, along with the advantages of superior troubleshooting. The EFI systems include detailed instructions, and will support manual and 6R80 automatic transmissions. Trust Telorvek from Ron Francis and The Detail Zone to wire your next EFI project.
Not Yet Reviewed
$1,283.75
—
$1,309.95
The Detail Zone Telorvek Ford 5.0 EFI wiring harnesses are for 5.0s. Are you tired of tracing circuits, cutting, and soldering? TDZ Telorvek fuel injection wiring systems provide all that you need, plus plenty of wire and instructions for a neat and professional looking job. Detail Zone systems supply you with the necessary Ford connectors with fire-resistant, printed wire--20 ft. for each sensor! And since they're printed with sensor and terminal information, there's no guessing or hours spent trying to figure out where they go! Simply plug them into the sensors, cut them to length, attach the terminals, and connect them to Telorvek panel, which then connects to the ECM. Complete closed loop systems allow your engine to run like the factory units. Diagnostic scan tool connections and MIL circuits are included, and you can also use the panel as a breakout box to take the voltage readings of different circuits. Free yourself from exhausting hours of checking for the right wires--wire your ride with The Detail Zone Telorvek Ford 5.0 EFI wiring harnesses.
( 1 )
$1,131.85
Around for over 15 years, the Telorvek panel design is a link between the engine sensors and computer, allowing the adjustment of wire lengths to create an exceptionally neat installation, plus the advantage of superior troubleshooting and the ability to mount the computer anywhere inside the vehicle. When it comes to EFI wiring, Telorvek is the name to trust. The Detail Zone Telorvek GM LS Vortec EFI wiring harnesses give you full control over your wiring job. Designed for coil-on-plug based LS-1 iron block engines found in most Chevy and GM trucks and SUVs, the kits include the correct, new GM connectors as required, along with crosslink, fire-resistant wire. Each kit has 20 ft. of wire for each sensor allowing you to cut to the proper length, and the wires are color-coded and printed with the sensor and terminal they connect to. Telorvek systems are fully functional, closed loop system, which allows the engine to run like factory. Due to the complex anti-theft found in these computers, your ECM will need reprogrammed. The Detail Zone can provide a host of other services on the ECM, including removing all the emissions. Key features: * Telorvek panel is stainless steel construction * High-quality SAE relays and connectors * Color-coded and labeled wires * Simple, straightforward instructions * Sensor connections pre-installed * ECU reprogramming available (sold separately) * Perfect for engine swaps, hot rod, GM vehicles, and track cars
Not Yet Reviewed
$1,131.85
The Detail Zone puts you in control of your Ford wiring job with their Telorvek Ford 4.6/5.4 V8 Modular EFI wiring harnesses. Your 4.6 or 5.4 V8 Modular-powered ride will run like factory with these TDZ fully functional, closed-loop, fully scannable wiring systems. Installation starts with the Telorvek panels--your centrally located link between your engine sensors and computer. Detail Zone supplies all of the correct and necessary connections, terminals, and 20 ft. of fire-resistant wire--no predetermined wire lengths! Not only will you have plenty of length, but all wires are printed with sensor and terminal information, so there's no guessing which is which or where it goes! You'll have no more long hours spent tracing circuits, cutting, or soldering. The Telorvek panel is capable of being used as a breakout box required for diagnostic procedures to take voltage readings of different circuits. Take control of your project for a guess-free install and a trouble-free start-up with The Detail Zone Telorvek Ford 4.6/5.4 V8 Modular EFI wiring harnesses.
( 3 )
$1,131.85
—
$1,283.75
Wire your hot rod your way with The Detail Zone Telorvek EFI wiring harnesses for GM LS1—because TDZ Telorvek fuel injection systems offer freedom, flexibility, and factory operation! They provide freedom of wire routing to fit your needs, the flexibility to choose almost any location you desire for your ECM, and the factory run of a complete closed loop system with diagnostic scan tool connections and MIL circuits for OEM scanning. The Detail Zone EFI wiring systems include all of the correct and necessary GM connectors and 20 ft. of printed wire for each sensor. They are easy to install—simply attach them to the sensors, correct the length, install the terminals, and connect them to the Telorvek panel. The panel's factory installed connectors allow you to plug right into your ECM!
Not Yet Reviewed
$1,131.85
The Detail Zone Telorvek GM LT1 EFI wiring harnesses offer freedom, flexibility, and factory performance. And TDZ Telorvek panels are the heart of your professional wiring job--the connection between your engine sensors and computer. Freedom: GM sensor connectors are factory installed to 20 ft. lengths of wire for easier routing. You plug the connector into the sensor, run the wires to the Telorvek panel that has factory installed connectors, and then plug them into the factory computer. Flexibility: These Detail Zone systems allow the ECM to be put almost anywhere you desire! Factory: All systems are complete and operate the engine in a closed loop--like the factory units, with comparable gas mileage and drivability! Trust Telorvek GM LT1 EFI wiring harnesses from The Detail Zone for a neat installation and excellent operation.
Not Yet Reviewed
$1,019.15
The Detail Zone Telorvek Ford 5.8 EFI wiring harnesses make wiring your project easier. These wiring kits come with all of the sensor connections pre-installed on color-coded and printed wire, which attaches to the engine and transmission using the factory ECM. TDZ Telorvek harnesses create an exceptionally neat installation, along with the advantages of superior troubleshooting. The EFI systems include detailed instructions, and are set up for speed density. Trust Telorvek from Ron Francis and The Detail Zone to wire your next EFI project.
Not Yet Reviewed
$1,156.35
The Detail Zone Telorvek GM 4.6 Northstar EFI wiring harnesses will make wiring your Cadillac engine easier. These wiring kits come with all of the sensor connections pre-installed on color-coded and printed wire, which attaches to the engine and transmission using the factory ECM. TDZ Telorvek harnesses create an exceptionally neat installation, along with the advantages of superior troubleshooting. The EFI systems include detailed instructions, and include wiring for injectors and MAP sensor. Trust Telorvek from Ron Francis and The Detail Zone to wire your next EFI project.
Not Yet Reviewed
$1,019.15
Around for over 15 years, the Telorvek panel design is a link between the engine sensors and computer, allowing the adjustment of wire lengths to create an exceptionally neat installation, plus the advantage of superior troubleshooting and the ability to mount the computer anywhere inside the vehicle. When it comes to EFI wiring, Telorvek is the name to trust. The Detail Zone Telorvek Ford 3.5 Ecoboost EFI wiring harnesses come with all the sensor connections pre-installed on color-coded and printed wire which attaches to the engine and transmission using the factory ECM. These harnesses support manual and 6R80 automatic transmissions and come with detailed instructions as well as tech support. Please note: In 1996, Ford began installing Passive Anti-Theft Systems (PATS) in their ECMs. Short of installing all the components and sensors from the donor vehicle, the only way to defeat PATS is through an ECM reprogramming (sold separately).
Not Yet Reviewed
$1,283.75
Ron Francis EXPRESS wiring systems make high performance wiring easier--even if you're not a pro! Their Ford powered EXPRESS wiring systems are built for your custom wiring applications and are delivered with all of the connectors and wiring that you need for your complete car, including the starter, alternator, steering column, and even the cooling fan relay! Ron Francis systems start with a terminal block crafted from polished stainless steel and include only high-temperature, fire-resistant, color-coded wiring, along with the highest quality terminals to do your wiring job right. And add-on accessories are not a problem, as a multi-connection battery junction block is included to reduce the number of wires going to your starter. Plus, their clear, color-coded instructions make your installation clean and professional. You can achieve successful results when you wire your Ford with Ron Francis EXPRESS wiring systems.
( 4 )
$1,299.43
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
