Ridetech/Air Ride Technologies

The road-hugging stance, the comfortable and responsive ride, the adjustable ride height and articulation—these are just a few of the reasons you want an air suspension....

The road-hugging stance, the comfortable and responsive ride, the adjustable ride height and articulation—these are just a few of the reasons you want an air suspension. Follow the lead of professional installers across the country and count on Air Ride Technologies, now known as Ridetech, for your complete air suspension solution. Ridetech’s extensive research and development department keeps the company on the leading edge of technology, resulting in systems and kits that are durable, reliable, and efficient.

Individual Parts

Part Groups

Results 1 - 21 of 21

Ridetech Front Brake Retention Kits

Ridetech front brake retention kits allow your stock calipers and rotors to be used with their Tru-turn Systems. Kits include caliper brackets, steering stop, hubs, bearings, and hardware.

5.0 out of 5 stars ( 1 )

$395.00

Ridetech 1965-79 F-100/F-150 IFS Suspension Systems

Ridetech 1965-79 F-100/F-150 IFS suspension systems are bolt-in and super stout. Significantly more rigid and stronger than the original front suspension, kits are available with Ridetech tall pin or hub spindles, and each kit is designed so you can install it yourself with hand tools and a little elbow grease. Features, notes, and specs: * Replaces bulky, heavy, poor handling twin I-beam suspension with a substantial H-style design * Bolt-in cradle is super strong and strengthens the front of the truck while providing structural mounts for front control arms * Superb suspension geometry * Control arms are assembled with ball joints and Delrin® bushings for smooth, squeak-free, long-lasting performance * Upper control arm cross shaft allows for easy alignment and use of caster slugs * Adjustable steering stop on lower control arm * Increased camber gain with tall spindle, 5 to 8 degrees of caster for improved high-speed stability * Motor mount "loops" connect cradle to frame rails to reinforce frame * Front sway bar measures 1.5 in. x .250 in. wall and provides confident cornering and smooth ride * Adjustable bump stops * Rack and pinion steering conversion with 15.5 in. center-to-center bushing mounts for 79 to 93 Mustang-style steering rack * Billet adjustable tie rods * Bump steer has been virtually eliminated * High-quality satin black powdercoat finish * Entire system saves approximately 130 lbs. from front of the truck

Not Yet Reviewed

$3,995.00

—

$4,315.00

RideTech Subframes

Ridetech subframes deliver several key improvements over the original and some existing aftermarket subframes. Optimized suspension geometry, improved wheel and tire clearance, and rack and pinion steering technology, plus many more features will surely put Ridetech's subframes on the top of your builder's wish list. Select the kit with the preferred spindles. Features and benefits: * Optimized geometry provides improved roll center, Ackermann, camber gain, caster and bump steer * Lowers stance 1 to 3 in. and maintains factory track width while increasing wheel and tire clearance * 2 in. more tire clearance per side over stock subframe allows better turning radius with larger tires/wheels * Fits up to 6.5 in. BS with no modifications or reduction in turning radius * Rack and pinion steering upgrade provides improved steering feel, enhancing driver feedback * Modular design is compatible with coilovers or Shockwaves (sold separately) * Subframe features durable powdercoat finish for great, long-lasting good looks and corrosion resistance * Available with AFX pin or late model hub spindle design -- Hub spindle allows install of modern C5/C6 Corvette brakes and C5/C6/C7 hubs (hubs not included) -- Pin spindle is compatible with stock style brakes (including aftermarket kits that fit stock spindle) * One-piece billet 6061 T-6 aluminum upper control arms and steering arms add superior strength * Larger front sway bar controls body roll, improving weight transfer * Tubular lower control arms include eccentric adjustment for caster and camber adjustments * Alignment adjustments are made complete under the car --no adjustments inside engine bay * Multiple motor mount options * Included adjustable transmission crossmember compatible with most popular manual and automatic transmissions * Improved header clearance and exhaust routing allow for a variety exhaust solutions

Not Yet Reviewed

$6,495.00

—

$6,645.00

Ridetech 1961-65 Falcon TruTurn Front Suspension Systems

Ridetech 1961-65 Falcon TruTurn front suspension systems will bring your classic into the 21st century. Designed to give your Falcon excellent handling along with a lifetime of enjoyment, the TruTurn System features optimized ball joint angles and the elimination of rubber bushings, ridding the system of bushing deflection and providing free suspension movement through the entire range of travel. The geometry has also been optimized for excellent handling, drivability, and minimal bump steer. Ridetech Falcon front suspension systems are available with pin spindles or hub spindles that offer the same geometry improvements as the pin style, but add the performance and simplicity of late model Mustang hubs and brakes. Choose the ideal kit for your Ford Falcon. Additional notes: * Bump steer reduced to less than 1/16 in. * Complete steering upgrade includes: draglink, pitman arm, idler arm, and idler arm mount * Zero to over 7 degrees of caster possible * Hub spindle kit includes MUSCLEBar sway bar * Can be used with Ridetech's coilovers or Shockwaves

Not Yet Reviewed

$3,885.00

Ridetech Tru-turn Steering Systems

Ridetech Tru-turn steering systems resolve poor suspension geometry, bad bump steer, and clearance issues on your early Camaro/Nova front-end. These packages include taller overall spindles to improve camber gain, steering arms designed to correct bump steer, and drag link brackets that bolt to your OEM drag link. They relocate your inner tie rod and minimize bump steer, and their tie rod assemblies are designed to integrate with your new steering arms and center link for a bolt-on system. Ridetech also offers upgrade packages with the same components minus the spindles. Choose a "Tru" no-fab steering system for your muscle car. They're available for a variety of cars from the 1960s and '70s

4.17 out of 5 stars ( 6 )

$3,670.00

Ridetech 1979-93 Mustang SLA Front Suspension Systems

Ridetech 1979-93 Mustang bolt-in SLA (Short-Long-Arm) front suspension systems replace the stock McPherson strut design with a billet aluminum upper control arm, tubular lower arm and spindles with S550 Mustang hubs. The factory strut design offers very little camber gain and poor overall geometry. This design greatly improves negative camber gain, which positions the tire perpendicular to the pavement through the corners without the need for excessive static camber and overly stiff spring rates. Caster, roll center and Ackerman angles were also optimized. These suspension systems are compatible with either Ridetech coilovers or Shockwave air suspension (sold separately). SLA front suspension systems are available in two fitment styles: * To fit STOCK K-Members (except 84-86 SVO) * To fit many AFTERMARKET K-Members, including Maximum Motorsports, Team Z, AJE and UPR Additional product features: * Incorporates an upper control arm to induce much-needed negative camber gain * Caster, roll center, bump steer and Ackerman angles are optimized * Bolt-in frame surrounds create attachment points for the upper control arms and the shocks. This keeps the load on the frame rails for maximum strength and reduced NVH * Upper and lower arms feature Delrin© bushings infused with PTFE to minimize stiction and eliminate the need for lubrication * Spindles include Moog S550 Mustang rear hubs for maximum strength, consistent braking and reduced maintenance * Lower control arm design improves tire clearance and steering angle 30 degrees with up to a 275mm wide tire Fitment: * Uses S550 (15-23) or SN95 (94-04) Mustang brake systems (caliper brackets sold separately) * 17 in. minimum wheel diameter * Compatible with stock and most aftermarket sway bars Specifications: * Negative camber gain: 1.25 degrees/in. * Positive caster: 7-9 degrees * Bump steer: under .050 in. * Lowers ride height: 1-2 in. * 50 lbs. lighter than stock suspension * Stock track width

5.0 out of 5 stars ( 1 )

$3,300.00

—

$3,650.00

Ridetech 1967-69 Camaro/Firebird HQ Coil-Over Systems

Ridetech 1967-69 Camaro / Firebird HQ coilover systems include everything you need to upgrade your existing suspension and give your muscle car an aggressive lowered stance with modern drivability. The packages contain front upper and lower control arms, tall spindles, a front sway bar, a rear 4-link, and four HQ Series coilovers for every corner of your vehicle. Buying a complete suspension system removes all the guesswork. Ridetech has spent hours collecting data to find a perfect spring rate and components for your vehicle's performance and ride quality. Product features: * Tall "pin" spindles will induce more negative camber gain to maximize tire contact patch during cornering. They also offer a 2 in. drop—which allows for the use of longer shocks, creating more suspension travel. Compatible with all brake kits designed to fit the stock disc brake spindle. * Optional "hub" spindles offer the same geometry improvements as the pin spindle but add the performance and simplicity of late model Corvette hubs and brakes. Uses C5/C6/C7 Corvette hubs for maximum strength, consistent braking and reduced maintenance. (Hubs not included.) Compatible with C5/C6 Corvette brake systems, OE and aftermarket (caliper brackets included). Minimum 17 in. wheels. * Upper Strongarms feature corrected ball joint angles for the tall spindles. The upper ball joints have been moved back to allow additional caster settings to improve high-speed stability and steering feel. Offset slugs are also available for additional caster. Injection-molded Delrin© bushings with 13 percent PTFE reduce deflection and stiction. * Lower Strongarms feature a double sheer lower mount for increased strength. Ridetech has also dropped the lower shock mount to increase suspension travel and moved the lower ball joint forward to increase caster settings while keeping the wheel centered in the wheel opening. Injection-molded Delrin© bushings with 13 percent PTFE are used to reduce deflection and stiction. * HQ Series coilovers utilize an impact-forged aluminum body and monotube design to deliver excellent ride quality and handling. They allow fine-tuning of the ride quality and handling via the rebound adjustment knob, located at the top of the shock, for under-the-hood access. They come standard with a 1,000,0001 Mile Warranty. * Front sway bar reduces body roll and creates room for wider front tires. Includes billet aluminum frame straps (anodized black) and low friction bushings. * Bolt-on 4-link dramatically improves traction, handling, and ride quality. Installation does not require significant modifications to the floor pan and requires only minimal welding to the axle tube. Works with mini-tubs. All links are double adjustable with R-joint rod ends, which combine the best qualities of low friction movement, lateral stability, full range articulation, and quiet operation into one special street/strip bearing. Upgrades: * Tru-Turn System: The early Camaro/Nova front-ends have very poor suspension geometry; the tires lean outward around turns, the bump steer is terrible, and there's little room to run a wide wheel because of the OEM steering arm interference with the inside of the wheel. The Tru-Turn system resolves ALL these issues; the tires now lean INTO the turn, the bump steer is UNDER .050 in. through 5 in. of suspension travel, and you now have clearance to run up to a 10 in. wide wheel with a 275mm tire! Compatible with both the Ridetech "pin" and "hub" spindles. * Rear sway bar: The addition of the rear sway bar is for the true track car. Wide tires plus big horsepower typically mean faster corner speeds. The MUSCLEBar sway bar helps keep those rear tires hooked up through the corner. * Weld-on lower axle brackets are available for aftermarket axle housing without stock-style leaf spring pads. Part number 70010122 is sold separately.

Not Yet Reviewed

$6,125.00

Ridetech Brake Caliper Brackets

Ridetech front brake caliper brackets can help improve braking performance. Featuring heavy-duty steel construction and a durable black finish, each pair of brackets are stamped with a "D" and "P" for proper placement on driver and passenger sides. Ridetech includes caliper spacers, shims, and hardware to complete the job. Choose the caliper brackets designed for your vehicle.

Not Yet Reviewed

$150.00

Ridetech MOMENTUM Chassis Kits

Ridetech, a leader in air and coil-over suspension systems for more than 30 years, proudly announces the launch of its MOMENTUM chassis kits. This all-new platform gives classic muscle car enthusiasts a clean-slate foundation for their next project—delivering modern handling, increased performance, and design flexibility beyond the limits of factory frames. Builders can now enjoy the benefits of a fully engineered chassis while tailoring the suspension to their preferred style of driving, whether that's comfortable street cruising, high-performance autocross, or full track use. Key engineering highlights include: * Ridetech's MOMENTUM Chassis Series is a new platform for classic muscle cars, offering modern handling, optimized suspension, and modular options, initially for 1968-1972 models * Optimized suspension geometry—the chassis re-engineers pickup points to improve camber gain, caster, roll center, and Ackermann steering geometry * Enhanced stability—the chassis is significantly stiffer than a stock frame, which reduces flex and increases structural rigidity for more predictable handling * Improved cornering—a new integrated sway bar helps reduce body roll and improve balance, leading to sharper cornering and greater stability * Confidence-inspiring control—the design provides improved handling for both daily driving and more demanding situations like autocross or track events * Increased tire and wheel clearance—the chassis is engineered to accommodate larger, modern wheel and tire sizes that would not fit on a factory chassis * More aggressive fitment—allows for wider tires (e.g., up to 275mm front and 295mm rear) with room for larger fitments, especially when combined with mini tubs in the rear * Adjustable ride height—the system allows for roughly a 2-inch drop from stock but can be adjusted to the desired ride height * Kit offers modular suspension options that allow for air or coilover setups * Chassis is compatible with existing Ridetech A-body suspension components * Engine and transmission flexibility provides provisions for various motor mount plates (small block Chevy, Olds, Pontiac, Buick, GMLS, or Gen 5 LT) and features an adjustable crossmember that adapts to popular automatic and manual transmissions

Not Yet Reviewed

$19,650.00

Ridetech 1967-69 Camaro/Firebird HQ Air Suspension Systems

Ridetech offers HQ air suspension systems for 1967-69 Camaro and Firebird (GM F-Body) applications. These Air Ride adjustable suspensions enable you to raise or lower your muscle car at the push of a button. The systems include front and rear HQ Series Shockwaves with adjustable rebound, plus upper and lower Strongarm front control arms, tall spindles, a bolt-on 4-link, and a front MUSCLEBar sway bar. Air Ride provides ultra-low show stance with modern ride quality and handling—and includes several components that will dramatically improve the suspension geometry to give your classic muscle car modern drivability. Systems are available with "pin" or "hub" spindles. Product features: * Tall "pin" spindles will induce more negative camber gain to maximize tire contact patch during cornering. They also offer a 2 in. drop—which allows for the use of longer shocks, creating more suspension travel. Compatible with all brake kits designed to fit the stock disc brake spindle. * OR … "hub" spindles offer the same geometry improvements as the pin spindle but add the performance and simplicity of late-model Corvette hubs and brakes. Uses C5/C6/C7 Corvette hubs for maximum strength, consistent braking, and reduced maintenance. (Hubs not included). Compatible with C5/C6 Corvette brake systems, OE, and aftermarket (caliper brackets included). Minimum 17 in. wheels. * The upper Strongarms feature corrected ball joint angles for the tall spindles. The upper ball joints have been moved back to allow for additional caster settings to improve high-speed stability and steering feel. Offset slugs are also available for additional caster. Delrin© bushings with 13 percent PTFE are used to reduce deflection and stiction. * The lower Strongarms feature a double sheer lower mount for increased strength. Ridetech has also dropped the lower shock mount to increase suspension travel and moved the lower ball joint forward to increase caster settings while keeping the wheel centered in the wheel opening. Delrin© bushings with 13 percent PTFE are used to reduce deflection and stiction. * HQ Series Shockwaves utilize an impact forged aluminum body and monotube design to deliver excellent ride quality and handling. They allow fine-tuning of the ride quality and handling. The rebound knob is at the top of the shock for easy underhood access. * Front sway bar reduces body roll and creates room for wider front tires. Includes billet aluminum frame straps (anodized black) and low friction bushings. * The bolt-on 4-link dramatically improves traction, handling, and ride quality. Installation does not require significant modifications to the floor pan and requires only minimal welding to the axle tube. Works with mini-tubs. All links are double adjustable with R-joint rod ends, combining the best qualities of low friction movement, lateral stability, full range articulation, and quiet operation into one special street/strip bearing. Upgrades: * Early Camaro/Nova front-ends have very poor suspension geometry—the tires lean outward around turns, the bump steer is bad, and there's little room to run a wide wheel because of the OEM steering arm interference with the inside of the wheel. The Tru-Turn System resolves ALL these issues; the tires now lean INTO the turn, the bump steer is UNDER .050 in. through 5 in. of suspension travel, and you now have clearance to run up to a 10 in. wide wheel with a 275mm tire! Compatible with both the Ridetech "pin" and "hub" spindles. * The addition of the rear sway bar is for the true track car. Wide tires plus big horsepower typically means faster corner speeds. The MUSCLEBar sway bar helps keep those rear tires hooked up through the corner. * Compressor Sytems: Ridetech offers its Ridepro E5 air suspension control system as a pre-assembled, all-in-one module as the "Airpod"; or you can purchase the Ridepro E5 system as a component kit to install how you like.

Not Yet Reviewed

$6,165.00

—

$6,315.00

Ridetech 1973-79 Ford Complete Coilover Suspension Systems

Ridetech 1973-79 Ford complete bolt-on coilover suspension systems deliver the best handling for your classic truck—in a package that you can install yourself with hand tools and a little elbow grease. 1965-1979 FRONT SUSPENSION: * Removes bulky, heavy, poor handling twin I-beam suspension * Bolt-in cradle strengthens the front of the truck while providing structural mounts for front control arms; utilizes substantial "H" style design compared to other "I" style crossmembers. * Superb suspension geometry, built without compromise, vastly superior to adapted salvage yard "Crown-Vic suspension swaps" or "street rod style" / Mustang II front systems with optimized roll centers and anti-dive. * Delrin© bushings on upper and lower control arms provide smooth, squeak-free long life * Upper control arm cross-shaft allows for easy alignment and use of caster slugs * Adjustable steering stop on lower control arm * Utilizes Ridetech tall "pin" spindle, which uses "AFX brake kits." Many brake kits (including Wilwood) are dual drilled for 5 x 4.5 in. or 5 x 4.75. lug pattern * Optional "Hub" spindles offer the same geometry improvements as the pin spindles but add the performance and simplicity of late model Mustang hubs and brakes. Includes S550 2015-23 Mustang hubs for maximum strength, consistent braking and reduced maintenance. Compatible with 2015-23 Mustang brake systems, OE and aftermarket (caliper brackets included). Minimum 17 in. wheels. Hubs fit Ford car 5 x 4.5 in. lug pattern and include 14mm studs. * Brake kit for the stock 5 x 5.5″ lug pattern with Ridetech pin spindle are available as well * Increased camber gain with tall spindle, 5-8 degrees caster for improved high-speed stability * 63.5 in. in front width (wheel mount surface to wheel mount surface); provides options for "traditional" offset wheel choices (4 in. narrower than Crown Vic) * Fits 14 in. and larger wheels. If using more than 4.5 in. of backspacing, 18 in. wheels are required * Motor mount "loops" connect cradle to frame rails to reinforce frame * Motor mount options for Modular Ford, Ford FE, and Small Block Ford, Chevy LS / Small Block / Big Block * Front sway bar measures 1.5 in. x .250 wall and provides confident cornering and smooth ride * Adjustable bump stops * Rack and pinion steering conversion with 15.5 in. center to center bushing mounts for 1979-93 Mustang-style steering rack * Includes billet adjustable tie rods * Bump steer has been virtually eliminated * Adaptable to stock steering column using kit 12319505; includes column adapter, U-Joint and shaft. * High-quality satin black powdercoat finish * Entire system saves approximately 130 lbs. from the front of the truck Rear 4-LINK SUSPENSION: * Removes factory leaf spring suspension and bracketry * Complete parallel 4-link with panhard and C-notches * Works with coilover or Shockwave air suspension * Includes R-Joints on all links for smooth, bind-free, quiet operation and long life * Optimized roll center and anti-squat (60 percent anti-dive) for amazing traction and elimination of wheel hop * High-quality satin black powdercoat finish * Reduces rear weight by 50 lbs. * 1965-1972: No bed modification needed * 1973-1979: Slight bed support rail modification needed (not visible from the top side of the truck * Compatible with short bed and long bed trucks * Adjustable coilover suspension system

Not Yet Reviewed

$8,610.00

Ridetech 1965-72 Ford Complete Coilover Suspension Systems

Ridetech 1965-72 Ford complete bolt-on coilover suspension systems deliver the best handling for your classic truck—in a package that you can install yourself with hand tools and a little elbow grease. 1965-1979 FRONT SUSPENSION: * Removes bulky, heavy, poor handling twin I-beam suspension * Bolt-in cradle strengthens the front of the truck while providing structural mounts for front control arms; utilizes substantial "H" style design compared to other "I" style crossmembers. * Superb suspension geometry, built without compromise, vastly superior to adapted salvage yard "Crown-Vic suspension swaps" or "street rod style" / Mustang II front systems with optimized roll centers and anti-dive. * Delrin© bushings on upper and lower control arms provide smooth, squeak-free long life * Upper control arm cross-shaft allows for easy alignment and use of caster slugs * Adjustable steering stop on lower control arm * Utilizes Ridetech tall "pin" spindle, which uses "AFX brake kits." Many brake kits (including Wilwood) are dual drilled for 5 x 4.5 in. or 5 x 4.75. lug pattern * Optional "Hub" spindles offer the same geometry improvements as the pin spindles but add the performance and simplicity of late model Mustang hubs and brakes. Includes S550 2015-23 Mustang hubs for maximum strength, consistent braking and reduced maintenance. Compatible with 2015-23 Mustang brake systems, OE and aftermarket (caliper brackets included). Minimum 17 in. wheels. Hubs fit Ford car 5 x 4.5 in. lug pattern and include 14mm studs. * Brake kit for the stock 5 x 5.5″ lug pattern with Ridetech pin spindle are available as well * Increased camber gain with tall spindle, 5-8 degrees caster for improved high-speed stability * 63.5 in. in front width (wheel mount surface to wheel mount surface); provides options for "traditional" offset wheel choices (4 in. narrower than Crown Vic) * Fits 14 in. and larger wheels. If using more than 4.5 in. of backspacing, 18 in. wheels are required * Motor mount "loops" connect cradle to frame rails to reinforce frame * Motor mount options for Modular Ford, Ford FE, and Small Block Ford, Chevy LS / Small Block / Big Block * Front sway bar measures 1.5 in. x .250 wall and provides confident cornering and smooth ride * Adjustable bump stops * Rack and pinion steering conversion with 15.5 in. center to center bushing mounts for 1979-93 Mustang-style steering rack * Includes billet adjustable tie rods * Bump steer has been virtually eliminated * Adaptable to stock steering column using kit 12319505; includes column adapter, U-Joint and shaft. * High-quality satin black powdercoat finish * Entire system saves approximately 130 lbs. from the front of the truck Rear 4-LINK SUSPENSION: * Removes factory leaf spring suspension and bracketry * Complete parallel 4-link with panhard and C-notches * Works with coilover or Shockwave air suspension * Includes R-Joints on all links for smooth, bind-free, quiet operation and long life * Optimized roll center and anti-squat (60 percent anti-dive) for amazing traction and elimination of wheel hop * High-quality satin black powdercoat finish * Reduces rear weight by 50 lbs. * 1965-1972: No bed modification needed * 1973-1979: Slight bed support rail modification needed (not visible from the top side of the truck * Compatible with short bed and long bed trucks * Adjustable coilover suspension system

Not Yet Reviewed

$8,610.00

Ridetech 1964-66 Mustang Air Suspension Systems

Ridetech 1964-66 Mustang air suspension systems are the perfect choice to deliver modern ride quality and handling to your classic muscle car, while providing an ultra-low show stance. (To complete this air suspension system, a Ridetech compressor system is required/recommended.) Ridetech 1964-66 Mustang air suspension systems include: * Upper Strongarms: feature corrected ball joint angles for the tall spindles (the upper ball joint has been moved back to allow for additional caster setting, which improves high-speed stability and steering feel). Billet cross shafts are included, with a lowered mounting point to increase camber gain and correct suspension geometry; they house a stout double sheer lower shock mount * Lower Strongarms: feature a unique design that combines the control and strut rod into a stronger, more appealing one-piece design. (Additional caster is designed into the arms, and includes a robust bearing in aluminum housing at the front mount to replace the soft factory rubber units) * Tru-Turn System: includes tall spindles, which induce more negative camber gain to maximize tire contact patch during cornering (also includes steering arms, center link adapter, tie rods and adjusters—to virtually eliminate bump steer, correct Ackerman angle, and allow for wider tires). This spindle is designed for use with 1967-69 Camaro brake systems (compatible with OEM manual steering, and with the Borgenson power steering conversion box). * HQ Series Shockwaves: utilize an impact forged aluminum body and monotube design to deliver excellent ride quality and handling (they also allow fine-tuning of the ride quality and handling; the rebound knob is located at the top of the shock for underhood access). * Front MUSCLEBar: helps reduce body roll and includes the PosiLink end links that provide immediate engagement between the chassis and control arms * Bolt-on 4-link: installation does not require any major modifications to the floor pan, and requires only minimal welding to the axle tube; also works with minitubs. The R-joint rod ends combine the best qualities of low-friction movement, lateral stability, full-range articulation, and quiet operation into one special bearing that is as home on the street as it is on the racetrack.

Not Yet Reviewed

$8,130.00

Ridetech 1961-65 Falcon Complete Coilover Suspension Systems

The Ridetech complete coilover suspension system for the 1961-65 Ford Falcon was built front the ground up to bring the Falcon into the 21st century. Ford Falcons are awesome! However, over 60 years have passed since the first Falcon was built—and the OEM 155/13 in. tires just won't cut it in today's world. FRONT: Ridetech started with fitting 225/40-R18 tires (recommended backspace 5.00 in.-5.25 in.) and then built a tubular control arm setup to provide all the correct geometry to get them to work effectively. The steering was also completely updated to provide quick response and virtually no bump steer. To finish off the front suspension, Ridetech fitted a new MuscleBar sway bar that's heavy enough to take on the most aggressive of drivers. This suspension package for the Ford Falcon will absolutely stun you! * Includes new Ridetech spindles (compatible with 1967-69 Camaro brakes) * Optional "Hub" spindles offer the same geometry improvements as the pin spindles, but add the performance and simplicity of late model Mustang hubs and brakes. Includes S550 2015-23 Mustang hubs for maximum strength, consistent braking and reduced maintenance. Compatible with 2015-23 Mustang brake systems, OE and aftermarket (caliper brackets included). Minimum 17 in. wheels. Hubs fit Ford car 5 x 4.5 in. lug pattern and include 14mm studs. * Bump steer reduced to less than 1/16 in. * Mini-Starter required to clear Tru-Turn draglink adapter (not Included) * Complete steering upgrade includes: Draglink (may require mini-starter for clearance), pitman arm (1 in. steering box sector shaft), idler arm, idler arm mount—compatible with manual steering, can be adapted to use Borgeson power steering system * Zero to over 7 degrees of caster possible * 1 1/8 in. solid front sway bar – Rate 608 lbs.-in. * When equipped with 225/40 -R18 tires, standard ride height is 22.75 in. ground to the fender lip * Optional frame brace available to reinforce lower control arm mounts and subframe. Compatible with V8 engine mounts only. REAR: Ridetech chose to fix the rear suspension in much the same way they've done on many muscle cars originally equipped with leaf springs: swap in a 4-link. This rear bolt-on 4-link suspension system completely transforms the little Ford Falcon into a world-class handling machine, and at the same time provides an incredibly smooth ride and bind-free operation. Starting off, the rear will accept up to a 225/40-R18 with a recommended backspace 5.50 in. – 6.00 in. and provide a ride height 18 3/4 in. ground to the fender lip. * Adjustable 4-link bars, including R-Joints * Triangulated 4-link; no need for panhard bar and keeps rear end movement vertical * Bolt-in cradle * Upper control arm axle mounts require welding * Spacers included to fit multiple factory leaf spring mounts (2 in. and 3 in.) * 3 mounting holes for lower control arm at axle: 1 – Top hole: Anti-squat 74.4 percent, Instant Center 72.8 in., Roll Center 12.95 in. 2 – Middle Hole: Anti-Squat 108.1 percent, Instant Center 58.35 in., Roll Center 11.67 in. 3 – Bottom Hole: Anti-Squat 135.5 percent, Instant Center 50.25 in., Roll Center 10.35 in. HQ Coil-Over suspension system for 1961-65 Ford Falcon includes: * Front and rear HQ Series Coil-Overs * Front upper and lower Strongarm tubular control arms * TruTurn system * Front sway bar * Rear 4-link system. * Also fits convertibles!

Not Yet Reviewed

$8,135.00

Ridetech 1973-79 Ford Air Suspension Systems

Ridetech 1973-79 Ford air suspension systems enable you to achieve that ultra-low show stance while providing excellent ride quality and handling. The older classic Ford trucks were designed and built for a different era—back when the speed limit was 55 and trucks were meant to work hard. While the original twin I-beam front suspension was built "Ford tough" it wasn't exactly built to carve corners. So, Ridetech set out to design the best handling classic Ford suspension for the 1973-79 Ford trucks—and build it in a package that you can install yourself with hand tools and a little elbow grease. These Ridetech Ford air suspension packages feature matched components to upgrade the performance of your old Ford for ride quality and handling with adjustable vehicle height. Complete systems vary by application and use and may include tubular a-arms, 4-links, coilovers, Shockwaves, air springs, shock absorbers, coil springs, leaf springs, sway bars, bushings, ball joints and more. Choose the Ford air suspension system recommended for your year/make/model.

Not Yet Reviewed

$8,800.00

Ridetech 1961-65 Falcon Air Suspension Systems

Ridetech 1961-65 Falcon air suspension systems were built from the ground up to transform your old school Falcon into "new cool" for the 21st century. You will have the versatility to take your classic to the local cruise by yourself, load it down with friends, throw all your stuff in the trunk, or lay your Ford in the weeds and the air suspension will take care of leveling the car back out. The kits are offered with HQ or TQ Series Shockwaves. Ridetech did the homework, got the geometry right, and matched the best components to deliver a strong bolt-on suspension system that will make your little Ford Falcon handle super tight and responsive, yet be compliant, quiet, and comfortable. Ridetech 1961-65 Ford Falcon air suspension systems include: * Front and rear HQ or TQ Series Shockwaves * Front upper and lower Strongarm tubular control arms * TruTurn system * Front MUSCLEBar sway bar * Rear 4-link system

Not Yet Reviewed

$8,300.00

Ridetech 1964-66 Mustang Complete Coilover Suspension Systems

The Ridetech complete coilover suspension system for the 1964-66 Ford Mustang includes everything you need to give your vintage muscle car modern drivability. The package contains front upper and lower control arms, tall spindles, steering arms, inner and outer tie rods, front MUSCLEBar, a bolt-In 4=link system, and four HQ Series coilovers for every corner of your vehicle. The benefit of buying a complete suspension system is that it removes all the guesswork when purchasing a new suspension. Ridetech has spent hours collecting data to find a perfect spring rate and components for your vehicle's performance and ride quality—designed to lower your vehicle. * Upper Strongarms feature corrected ball joint angles for the tall spindles. The upper ball joint have been moved back to allow for additional caster setting to improve high-speed stability and steering feel. Billet cross-shafts are included that feature a lowered mounting point to increase camber gain and correct suspension geometry. They house a stout double sheer lower shock mount. * Lower Strongarms feature a unique design that combines the control arm and strut rod into a stronger, more appealing one-piece design. Additional caster is designed into the arms and includes a robust bearing in an aluminum housing at the front mount to replace the soft factory rubber units. * Tru-Turn System includes tall spindles which induce more negative camber gain to maximize tire contact patch during cornering. It also includes steering arms, center link adapter, tie rods and adjusters to virtually eliminate bump steer, correct Ackerman angle, and allow for wider tires. Includes heavy-duty frame rail brace. This spindle is designed for use with 1967-69 Camaro brake systems. Compatible with OEM manual steering AND with the Borgeson power steering conversion box. * Optional "Hub" spindles offer the same geometry improvements as the pin spindles, but add the performance and simplicity of late model Mustang hubs and brakes. Includes S550 2015-23 Mustang hubs for maximum strength, consistent braking and reduced maintenance. Compatible with 2015-23 Mustang brake systems, OE and aftermarket (caliper brackets included). Minimum 17 in. wheels. Hubs fit Ford car 5 x 4.5 in. lug pattern and include 14mm studs. * HQ Series coilovers utilize an impact forged aluminum body and monotube design to deliver excellent ride quality and handling. They allow fine-tuning of the ride quality and handling; the rebound knob is located at the top of the shock for underhood access. The shocks come standard with a 1,000,0001 Mile Warranty. Interested in Autocross or Road Course racing? Consider the TQ Series coilovers. * Front MUSCLEBar sway bar helps reduce body roll and includes the PosiLink end links that provide immediate engagement between the chassis and control arms. Includes billet aluminum frame straps (anodized black) and low-friction bushings. * Bolt-on 4-link dramatically improves traction, handling, and ride quality. Installation does not require significant modifications to the floor pan and requires only minimal welding to the axle tube. Works with mini-tubs. All links are double adjustable with R-Joint rod ends, which combine the best qualities of low friction movement, lateral stability, full range articulation, and quiet operation into one special bearing that is at home on the street as it is on the race track! * Weld-on lower axle brackets are available if using an aftermarket axle housing without stock-style leaf spring pads. (Part number 70010122, sold separately.)

Not Yet Reviewed

$7,670.00

—

$7,990.00

Ridetech 1965-72 Ford Air Suspension Systems

Ridetech 1965-72 Ford air suspension systems enable you to achieve that ultra-low show stance while providing excellent ride quality and handling. The older classic Ford trucks were designed and built for a different era—back when the speed limit was 55 and trucks were meant to work hard. While the original twin I-beam front suspension was built "Ford tough" it wasn't exactly built to carve corners. So, Ridetech set out to design the best handling classic Ford suspension for the 1965-72 Ford trucks—and build it in a package that you can install yourself with hand tools and a little elbow grease. These Ridetech Ford air suspension packages feature matched components to upgrade the performance of your old Ford for ride quality and handling with adjustable vehicle height. Complete systems vary by application and use and may include tubular a-arms, 4-links, coilovers, Shockwaves, air springs, shock absorbers, coil springs, leaf springs, sway bars, bushings, ball joints and more. Choose the Ford air suspension system recommended for your year/make/model.

Not Yet Reviewed

$8,800.00

Ridetech Drop Spindles

Ridetech drop spindles are manufactured from heavy-duty steel to give you great performance. They offer an economical way to lower your ride correctly by maintaining alignment and ride quality. The spindles are available in a variety of styles; order the pair recommended for your vehicle.

4.5 out of 5 stars ( 16 )

$475.00

Ridetech 1967-69 Camaro/Firebird TQ Air Suspension Systems

Ridetech 1967-69 Camaro/Firebird (GM F-Body) TQ air suspension systems provide ultra-low show stance with modern ride quality and handling. These packages include front and rear HQ Shockwaves, upper and lower Strongarms, tall spindles, bolt-on 4-link with double adjustable bars and front sway bar. Buying a complete suspension system removes all the guesswork! Ridetech has spent hours collecting data to find the perfect spring rate and components for your vehicle's performance and ride quality. Tubular upper and lower Strongarms feature injection-molded Delrin© bushings with 13 percent PTFE reduce deflection and stiction. Ball joint angles are corrected for the tall spindles and the positions altered to allow more caster while keeping the wheel centered in the wheel opening. The additional caster settings improve high-speed stability and steering feel. Offset slugs are also available for additional caster. The lower arms feature a double sheer lower mount that has been lowered for increased suspension travel. Additional details: * Tall "pin" spindles will induce more negative camber gain to maximize tire contact patch during cornering. They also offer a 2 in. drop—which allows for the use of longer shocks, creating more suspension travel. Compatible with all brake kits designed to fit the stock disc brake spindle. * Optional "hub" spindles offer the same geometry improvements as the pin spindle but add the performance and simplicity of late model Corvette hubs and brakes. Uses C5/C6/C7 Corvette hubs for maximum strength, consistent braking and reduced maintenance. (Hubs not included.) Compatible with C5/C6 Corvette brake systems, OE and aftermarket (caliper brackets included). Minimum 17 in. wheels. * Upper Strongarms feature corrected ball joint angles for the tall spindles. The upper ball joints have been moved back to allow additional caster settings to improve high-speed stability and steering feel. Offset slugs are also available for additional caster. Injection-molded Delrin© bushings with 13 percent PTFE reduce deflection and stiction. * Lower Strongarms feature a double sheer lower mount for increased strength. We have also dropped the lower shock mount to increase suspension travel and moved the lower ball joint forward to increase caster settings while keeping the wheel centered in the wheel opening. Injection-molded Delrin© bushings with 13 percent PTFE are used to reduce deflection and stiction. * TQ Series Shockwaves feature triple adjustable shock valving and are housed in an impact forged aluminum construction

Not Yet Reviewed

$8,485.00

Ridetech 1967-69 Camaro/Firebird TQ Coil-Over Systems

Ridetech 1967-69 Camaro / Firebird (GM F-Body) TQ coilover systems include everything you need to upgrade your existing suspension and give your muscle car an aggressive lowered stance with modern drivability. Each package contains front and rear HQ coilovers, front upper and lower Strongarms, tall spindles, bolt-on 4-link with double adjustable bars and front sway bar. Buying a complete suspension system removes all the guesswork. Ridetech has spent hours collecting data to find the perfect spring rate and components for your vehicle's performance and ride quality. Tubular upper and lower Strongarms feature injection-molded Delrin© bushings with 13 percent PTFE reduce deflection and stiction. Ball joint angles are corrected for the tall spindles and the positions altered to allow more caster while keeping the wheel centered in the wheel opening. The additional caster settings improve high-speed stability and steering feel. The lower arms feature a double sheer lower mount that's been lowered for increased suspension travel. Additional details: * Tall "pin" spindles will induce more negative camber gain to maximize tire contact patch during cornering. It also offers a 2 in. drop—which allows for the use of longer shocks, creating more suspension travel. Compatible with all brake kits designed to fit the stock disc brake spindle. * Optional "hub" spindles offer the same geometry improvements as the pin spindle but add the performance and simplicity of late model Corvette hubs and brakes. Uses C5/C6/C7 Corvette hubs for maximum strength, consistent braking and reduced maintenance. (Hubs not included.) Compatible with C5/C6 Corvette brake systems, OE and aftermarket (caliper brackets included). Minimum 17 in. wheels. * Upper Strongarms feature corrected ball joint angles for the tall spindles. The upper ball joints have been moved back to allow additional caster settings to improve high-speed stability and steering feel. Offset slugs are also available for additional caster. Injection-molded Delrin© bushings with 13 percent PTFE reduce deflection and stiction. * Lower Strongarms feature a double sheer lower mount for increased strength. We have also dropped the lower shock mount to increase suspension travel and moved the lower ball joint forward to increase caster settings while keeping the wheel centered in the wheel opening. Injection-molded Delrin© bushings with 13 percent PTFE are used to reduce deflection and stiction. * TQ "Track Quality" Series coilovers offer competition-grade handling with dual compression adjustment and rebound adjustment for precise tuning. Remote reservoirs provide consistent fluid temps in all environments, as well as easier access to compression tuning knobs.

Not Yet Reviewed

$8,115.00

Page 1 of 1