Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
Availability
Ridetech Ridepro E5 Air Ride Suspension Control Airpod Single Compressor Systems
Ridetech Ridepro E5 Air Ride Suspension Control Airpod single compressor systems are pre-wired solutions that mount in your vehicle as a single unit and adjust vehicle height at the push of a button while maintaining balanced air springs. With sophisticated pressure and height algorithms, Ridepro E5 control systems tune air ride suspension for proper handling and world-class ride quality, so that each time your turn the ignition key, Ridepro E5 self-adjusts to ride height and compensates for changes in load. And adjusting vehicle height is as simple as choosing one of three presets. You can also control the system wirelessly by simply connecting a compatible smartphone via Bluetooth and using the Ridepro E5 app. Ridetech Ridepro E5 Airpod systems feature and include: * Full color TFT LCD. 3.5 in. display with multi-touch capacitive touchscreen * 4-button silicone keypad with backlit symbols for quick vehicle height changes * "Ride Height On Start" automatic lift and level feature * Display and setup via control panel, smartphone app or laptop * Weatherproof ECM and heavy-duty connectors * Automatic weight compensation (with optional height sensors) * Bluetooth connectivity to most smartphones for wireless control * Airpod aluminum 3-gallon tank * Ridepro E5 digital control * Thomas compressor * 1/4 in. valves
Not Yet Reviewed
$2,615.00
Ridetech Ridepro E5 Ride Height Sensor Kits
Ridetech Ridepro-HP Ride Height sensor kits upgrade your existing Ridepro E5 pressure-based system. They work together to deliver the ultimate air suspension management systems measuring both pressure and ride height accurately. With the addition of Ridepro-HP, ride height and spring balance (loads) are established by comparing the position of the ride height sensor to the air pressure within each air spring. Your car is leveled with no cross loading, which is especially important for dynamic driving scenarios where quick transitions occur, such as high performance driving, sudden directional changes, and panic stops. Ridetech complete Ridepro-HP kits include and feature: * Four ride height sensors * Four ride height sensor linkage kits * Group harness * 1/4 in. sensor bolts with Nyloc nuts and flat washers * Mounting tabs, heat shrink tubes, and installation guide * Easy installation * Heavy-duty ride height sensors * Bendable linkage rods with rubberized rod ends * Weatherproof connectors and wiring harnesses
( 1 )
$523.00
Ridetech Spanner Wrenches
Spanner wrenches are a must-have tool for adjusting your coilover shock absorbers. Ridetech's wrenches grip the retainer under the spring to spin it and adjust the coil spring up or down. By loosening the small bolt holding the collar, you can turn it with the wrench; no need to unbolt the top of the shock. Correct adjustment of the coil spring preload is a critical step toward improved suspension and handling. Ridetech machined spanner wrenches can be used manually or as an attachment on your 3/8 in. ratchet.
( 16 )
$20.00
Ridetech HQ 1000 Series Shockwave Shocks
Ridetech HQ 1000 Series Shockwave shocks are meant for use on independent front and/or rear applications weighing 1,500 to 2,500 lbs. per axle. The (HQ) stands for handling quality, and they are a step up from Ridetech's RQ shocks. The HQ 1000 Series features single-adjustable shock valving and an impact-forged body/monotube design for superior ride quality and durability. They're available in a wide range of stroke lengths and mounting styles to fit a large variety of applications. Whether you are doing a high-end build or just a personal project, use Ridetech for your suspension system to experience outstanding performance and superior handling.
( 7 )
$945.00
Ridetech Ridepro 3 Gallon Analog Compressor Systems
Ridetech Ridepro Analog compressor systems use a 3 gallon compressor leveling system with 1/4 inch air valve, manual 4 way switches, and gauges. This 3 gallon tank and single compressor design is recommended for vehicles under 3500 pounds. This system includes a separate aluminum 3 gallon tank, Ridepro air valve block, 1/4 inch air lines, fittings, and wiring. Control your air ride equipped vehicle height with this affordable air suspension leveling system. Ridepro analog compressor systems utilizes a high quality solenoid air valve system, manual switches, analog gauges, and dependable electric components to provide simple and reliable air suspension leveling control.
( 4 )
$1,370.00
Ridetech Ridepro E5 Air Ride Suspension Control Single Compressor Systems
Ridetech Ridepro E5 Air Ride Suspension Control single compressor systems adjust vehicle height at the push of a button while maintaining balanced air springs. With sophisticated pressure and height algorithms, Ridepro E5 control systems tune air ride suspension for proper handling and world-class ride quality, so that each time your turn the ignition key, Ridepro E5 self-adjusts to ride height and compensates for changes in load. And adjusting vehicle height is as simple as choosing one of three presets. You can also control the system wirelessly by simply connecting a compatible smartphone via Bluetooth and using the Ridepro E5 app. RideTech RidePro E5 single systems feature and include: * Full color TFT LCD. 3.5 in. display with multi-touch capacitive touchscreen * 4-button silicone keypad with backlit symbols for quick vehicle height changes * "Ride Height On Start" automatic lift and level feature * Display and setup via control panel, smartphone app or laptop * Weatherproof ECM and heavy-duty connectors * Automatic weight compensation (with optional height sensors) * Bluetooth connectivity to most smartphones for wireless control * Aluminum 3-gallon tank * Ridepro valves * Thomas compressor * 1/4 in. air lines and fittings * Perfect for vehicles up to 3,500 lbs.
Not Yet Reviewed
$2,415.00
Ridetech HQ Coilover Kits
Ridetech HQ coilover kits are designed with handling performance and ride quality in mind. They feature impact-forged aluminum threaded body monotube, gas-pressurized shocks that have been clear anodized for corrosion protection. Other features include: oversized rod guides for maximum strength and durability; Delrin coilover spring washers for easy spring retainer adjustments; stainless steel mounting brackets; and CNC-machined billet hardware. The shocks include Hyperco springs (made with high-tensile premium cold-wound steel) that have a durable powdercoat finish. The unique pinch-clamp height adjusters offer finer threads for easy height adjustment. Order the kit designed for your specific vehicle.
( 15 )
$988.00
—
$3,685.00
Ridetech MUSCLEBar Sway Bars
Ridetech has upgraded the traditional notion of sway bars with their MUSCLEBar. Using precision CNC tubing benders, investment cast steel bar ends, and Delrin lined mount bushings, Ridetech produces sway bars with unheard of dimensional and rate accuracy. MUSCLEBar features: * Precision CNC-bent tubing for accurate and repeatable fitment * Exact bar rates included with each bar * Delrin-lined frame mount bushings allow easy and predictable rotation over the stiction of polyurethane or rubber * Investment cast steel bar ends offer performance and appearance improvements over the traditional manufacturing * Easy installation spherical end links with barrel lock nuts * Compatible with OE manual steering, OE power steering, and aftermarket power steering conversions
( 24 )
$375.00
—
$595.00
Ridetech 1979-93 Mustang Independent Rear Suspension Systems
Transform your Fox Body's handling with a Ridetech 1979-93 Mustang Independent Rear Suspension System. It's no secret that independent rear suspensions (IRS) are superior in almost every way over a stick axle. The biggest concerns are cost and ease of installation. This independent rear suspension system replaces the stock live design with tubular upper and lower control arms utilizing custom-made spindles with S550 Mustang hubs. Camber, roll center, and toe angles were also optimized for greatly increased handling. The bolt-in design requires no welding for installation, as the IRS cradle is designed to mount to the rear frame rails and modified factory mounting points. If you want to optimize the rear suspension of your Fox Body Mustang, do it with this highly engineered IRS system so you can hit the track or street with confidence. Key features and benefits: * High-quality, no compromises manufacturing * Durable powdercoat finish for great looks and corrosion resistance * 100 percent bolt-in design requires minimal modifications * Lowers stance approximately 2 inches—reduces center of gravity without adversely affecting suspension geometry * Reduces upsprung weight creates premium ride quality * Low roll center (5 in.)—one degree of camber gain and zero bump steer inspires confident cornering for improved suspension geometry over OE suspension design and much more enjoyable to drive * 50 percent anti-squat provides excellent traction * Delrin control arm bushings eliminate deflection—no wheel hop, and no noise and no lubrication of bushings required * Retains factory track width * Compatible with mini-tubs (cradle attaches to the inside of the frame rails) * Modular design—works with Ridetech coil-overs or Shockwaves (sold separately), HQ and TQ (Triple Adjustable) versions are also available * Spindles include Moog S550 Mustang rear hubs for maximum strength, consistent braking and reduced maintenance Fitment Information: * Uses S550 (2015+) Mustang differential (not included)—new units can be purchased from Ford Performance, and Takeout units are also available * Uses shortened S550 (2015+) Mustang axles (not included)—standard strength are available from Ridetech * Allows direct bolt-on of both stock SN95 Cobra (1999-2004) or S550 (2015+) rear OE or aftermarket brakes via Ridetech caliper brackets. * Works with 1999-2004 Cobra cat-back exhaust * Requires shortened drive shaft and pinion flange to U-joint adapter (use Sonnax part T35-ALFY-09 or T35-ALFY-10) * Works with Ridetech coilovers or Shockwaves, sold separately * Optional adjustable rate rear sway bar is available for additional fine-tuning
Not Yet Reviewed
$4,500.00
Ridetech 1979-93 Mustang SLA Front Suspension Systems
Ridetech 1979-93 Mustang bolt-in SLA (Short-Long-Arm) front suspension systems replace the stock McPherson strut design with a billet aluminum upper control arm, tubular lower arm and spindles with S550 Mustang hubs. The factory strut design offers very little camber gain and poor overall geometry. This design greatly improves negative camber gain, which positions the tire perpendicular to the pavement through the corners without the need for excessive static camber and overly stiff spring rates. Caster, roll center and Ackerman angles were also optimized. These suspension systems are compatible with either Ridetech coilovers or Shockwave air suspension (sold separately). SLA front suspension systems are available in two fitment styles: * To fit STOCK K-Members (except 84-86 SVO) * To fit many AFTERMARKET K-Members, including Maximum Motorsports, Team Z, AJE and UPR Additional product features: * Incorporates an upper control arm to induce much-needed negative camber gain * Caster, roll center, bump steer and Ackerman angles are optimized * Bolt-in frame surrounds create attachment points for the upper control arms and the shocks. This keeps the load on the frame rails for maximum strength and reduced NVH * Upper and lower arms feature Delrin© bushings infused with PTFE to minimize stiction and eliminate the need for lubrication * Spindles include Moog S550 Mustang rear hubs for maximum strength, consistent braking and reduced maintenance * Lower control arm design improves tire clearance and steering angle 30 degrees with up to a 275mm wide tire Fitment: * Uses S550 (15-23) or SN95 (94-04) Mustang brake systems (caliper brackets sold separately) * 17 in. minimum wheel diameter * Compatible with stock and most aftermarket sway bars Specifications: * Negative camber gain: 1.25 degrees/in. * Positive caster: 7-9 degrees * Bump steer: under .050 in. * Lowers ride height: 1-2 in. * 50 lbs. lighter than stock suspension * Stock track width
( 1 )
$3,300.00
—
$3,650.00
Ridetech Airpod Covers
Ridetech Airpod covers keep your system under cover and your trunk looking good. These heavy-duty covers provide a professional, aesthetic look for your 3 or 5-gallon Ridetech Airpod compressor. The covers are easy to install for a clean, sleek appearance.
( 1 )
$155.00
Ridetech HQ Series Shockwave Air Shocks
Having the proper suspension plays a big part in the outcome on the track--Ridetech HQ Series Shockwave air shocks are just what you've been looking for to add that desired performance to your vehicle! They improve ride quality over steel springs and provide a huge range of tuning options. Ridetech HQ Series Shockwave air shocks' mounting styles accommodate a wide variety of applications with more configuration options than ever before. They feature aluminum impact-forged construction for leak-free operation, and a monotube design for superior oil control, ride quality, and handling. You no longer have to settle for less when you have Ridetech HQ Series Shockwave air shocks on your vehicle! Features include: * Adjustable ride height--lower and raise the vehicle quickly without sacrificing drivability or durability * For longevity, the air spring is made from same high-quality rubber that 18-wheelers use * Available in a wide range of stroke lengths * Easy and precise single rebound shock valving adjustment with 26 clicks * Large rubber external bump stop to prevent harsh bottoming out * 5/8 in. hardened shaft is precision ground and straightened to a tolerance of .001 in. for increased durability and performance * Billet end cap with integrated debris wiper to prevent seal damage * Oversized rod guide improves piston rod stability * Integral internal bump stop prevents extension crashing * Hard coat external anodizing for lasting beauty and performance * Teflon piston wiper and progressive valving provide consistent piston/bore contact for repeatable performance * Monotube bore is cathode anodized for wear resistance * Specially-contoured composite gas separator cup optimizes dead length and ensures proper nitrogen/oil separation * Long-lasting KEVLAR® -lined bearings allow wide articulation with low noise
( 3 )
$945.00
—
$1,995.00
Ridetech HQ Coilover Shocks
Ridetech HQ coilover shocks are designed with handling performance and ride quality in mind. They feature impact-forged aluminum threaded body monotube, gas-pressurized shocks that have been clear anodized for corrosion protection. Other features include: oversized rod guides for maximum strength and durability; Delrin coilover spring washers for easy spring retainer adjustments; stainless steel mounting brackets; and CNC-machined billet hardware. The shocks include Hyperco springs made with high-tensile premium cold wound steel and finished with a durable powdercoat finish. The unique pinch-clamp height adjusters offer finer threads for easy height adjustment. Order the model designed for your specific vehicle.
Not Yet Reviewed
$840.00
Summit Bucks
Ridetech Strongarms Tubular Control Arms
Ridetech Strongarm tubular control arms are designed to stiffen up your vehicle's chassis, while providing a smoother ride. They feature a tubular design that offers maximum strength—and are available for a variety of front and rear positions. The control arms include bushings and factory-installed ball joints (front), making installation easier. Get optimum suspension geometry with a set of Ridetech Strongarm tubular control arms; order the kit recommended for your vehicle.
( 19 )
$295.00
—
$385.00
Ridetech Shockwave 7000 Air Shocks
The 4 in. diameter of these Ridetech Shockwave 7000 air shocks allows for placement in a smaller space. The softer spring rate and load capacity offer an even better ride for lighter weight vehicles. Make your vehicle ride smoothly on air with a set of Ridetech Shockwave 7000 air shocks.
( 1 )
$995.00
Ridetech 1979-89 Mustang Air Suspension Systems
Ridetech 1979-89 Mustang air suspension systems provide the perfect solution to the perfect stance at the perfect price. These systems will also improve the ride quality and handling with an emphasis on function and safety for your classic. Ridetech Mustang air suspension systems feature: * Front and rear HQ Series Shockwaves * Rear upper and lower Strongarms
Not Yet Reviewed
$3,670.00
Ridetech Air-over-leaf Systems
Ridetech Air-over-leaf systems are completely bolt-on and require little or no modification to your vehicle. They offer great ride quality and extra load capacity without reengineering your vehicle. These systems lower vehicle ride height and improve handling by removing either one or two leaf springs. The Ridetech Air-over-leaf systems have included mounting hardware to maintain ground clearance, driveline angles, tire clearance, and load capacities.
( 3 )
$475.00
Ridetech TQ Series Shockwave Air Shocks
Ridetech TQ Series Shockwave air shocks mount just like coilovers on most vehicles—replacing the coil spring with an adjustable air spring for a huge range of tuning options. Shockwaves deliver exceptional ride quality, handling, and the ride stance you prefer. They're available for hundreds of car and truck applications. Order the shocks designed for your specific year, make, and model.
Not Yet Reviewed
$2,105.00
Ridetech Ford Mustang Level 2 Suspension Systems
Change the suspension dynamic of your vehicle with one of these Ridetech Ford Mustang Level 2 suspension systems. They feature a front pair of Airstruts with strut mount bearings and a rear Shockwave kit. The systems include Ridetech's Ridepro e2 4-way controller with a single compressor, a 3 gallon tank, and a digital gauge display.
Not Yet Reviewed
$3,685.00
Ridetech TQ Coilover Struts
Ridetech TQ Track Quality coilover struts aren't just replacements; they are designed with handling and ride quality in mind. They're available for front or rear, upper or lower mount. Order the model recommended for your vehicle. Ridetech TQ coilover struts feature: * Steel monotube strut design * Oversized rod guides for maximum strength and durability * Extruded aluminum clamp mount with integrated stainless brake line, ABS for bolt-on installation * Nitro carburized finish for lasting durability * Billet upper mounting bracket with built-in camber/caster adjustment. * Integrated thrust bearing * Adjustable ride height
Not Yet Reviewed
$1,995.00
Ridetech TQ Coilover Shocks
Track quality—Ridetech TQ coilover shocks offer a performance level for competition. TQ coilovers feature a single rebound adjustment and a dual stage—high speed and low speed—compression adjustment. Ridetech also designed these monotube aluminum shocks with a remote reservoir that is connected with a 30 in. braided line for easy installation in a variety of applications. These supreme shocks are surrounded by powdercoated high-tensile premium steel CNC cold-wound springs that offer less weight, more resistance to bowing, and increased travel. There's ride quality, handling quality, and now track quality from Ridetech—the TQ series of coilover shocks for winning performance on road courses, race tracks, and extreme environments. Other premium features: * Impact-forged aluminum body * Anodized finished * CNC-machined billet hardware * Larger piston * Double sealed rod guide * 5/8 in. chrome shock shaft
Not Yet Reviewed
$1,960.00
Ridetech Coolride Systems
These Coolride systems have the greatest application coverage and versatility of all of Ridetech's systems. They will raise and lower the vehicle, improve the handling, and offer a terrific ride. On a front system, the shock is usually relocated to the outboard side of the lower control arm. A weld-on bracket mounts the top of the shock to the frame rail. On a rear system, the air spring and shock absorber will normally go in the stock locations. These Coolride systems consist of an air spring, a shock absorber, and all of the necessary mounting bracketry and hardware.
( 2 )
$495.00
Ridetech Brake Caliper Brackets
Ridetech front brake caliper brackets can help improve braking performance. Featuring heavy-duty steel construction and a durable black finish, each pair of brackets are stamped with a "D" and "P" for proper placement on driver and passenger sides. Ridetech includes caliper spacers, shims, and hardware to complete the job. Choose the caliper brackets designed for your vehicle.
Not Yet Reviewed
$170.00
