Availability
RideTech Corvette coilover suspension systems include MuscleBar sway bars, Delrin control arm bushings, and powdercoated conversion brackets. The 100 percent bolt-on kit will significantly improve your Corvette's handling, while giving you control over ride-height adjustment. RideTech engineers custom-tailored the system's HQ Series shock absorber valving for modern, world-class ride quality. Rebound adjustment knobs help you fine-tune ride and handling to your driving style and tire selection. For the ultimate track experience, upgrade to the TQ Series coilovers with a remote reservoir for high and low speed compression adjustments. RideTech's CNC-bent MuscleBar sway bars increase bar rate over stock, allowing for more comfortable, compliant coil spring rates. MuscleBars feature investment cast bar ends that perfectly engage end-link bushings as your Corvette's cornering loads change. Delrin-lined mounting bushings never squeak or need lubricating. The same is true for the kit's Delrin A-arm bushings. Overall, the C4 Corvette coilover conversion systems offer tremendous bang for the buck with real-world improvements. They're a game changer for the C4 Corvette platform. (Included shock absorbers carry a 1,000,001 mile warranty.)
Not Yet Reviewed
$7,770.00
RideTech bolt-on 4-link systems provide a lowered ride height with smooth handling. They include the link bars with rubber bushings, powdercoated brackets, and optional front upper or lower controls arms, depending on the vehicle application. The suspension systems require no welding or cutting, making installation easy. Order the kit designed for fitment on your year/make/model.
( 8 )
$575.00
—
$2,595.00
RideTech drop spindles are manufactured from heavy-duty steel to give you great performance. They offer an economical way to lower your ride correctly by maintaining alignment and ride quality. The spindles are available in a variety of styles; order the pair recommended for your vehicle.
( 15 )
$450.00
—
$475.00
RideTech StrongArm tubular control arms are designed to stiffen up your vehicle's chassis, while providing a smoother ride. They feature a tubular design that offers maximum strength—and are available for a variety of front and rear positions. The control arms include bushings and factory-installed ball joints (front), making installation easier. Get optimum suspension geometry with a set of RideTech StrongArm tubular control arms; order the kit recommended for your vehicle.
( 17 )
$205.00
—
$1,995.00
RideTech HQ coilover kits are designed with handling performance and ride quality in mind. They feature impact-forged aluminum threaded body monotube, gas-pressurized shocks that have been clear anodized for corrosion protection. Other features include: oversized rod guides for maximum strength and durability; Delrin coilover spring washers for easy spring retainer adjustments; stainless steel mounting brackets; and CNC-machined billet hardware. The shocks include Hyperco springs (made with high-tensile premium cold-wound steel) that have a durable powdercoat finish. The unique pinch-clamp height adjusters offer finer threads for easy height adjustment. Order the kit designed for your specific vehicle.
( 14 )
$668.50
—
$1,040.00
RideTech steering kits are available for a wide range of vehicles, from 1955 and up. They contain tie rod ends, billet tie rod adjusters, idler arms, center links, pitman arms, and more (as applicable; see photo for kit contents). The parts are built to OE specs for a perfect fit, machined to premium quality standards for great performance. Each steering kit is conveniently packaged with everything needed for your application.
( 36 )
$230.00
—
$385.00
RideTech 1963-70 C10 complete coilover systems deliver handling quality. These HQ Series systems are suitable for most high performance applications. They offer rebound adjustment to help you fine tune the ride quality and handling of your truck. RideTech 1963-70 C10 complete coilover systems include: * Front and rear HQ Series coilovers * Front upper and lower StrongArms * Rear StrongArms * Drop spindles * Front MuscleBar
Not Yet Reviewed
$7,120.00
RideTech RidePro E5 Air Ride Suspension Control dual compressor systems are pre-wired solutions that mount in your vehicle as a single unit and adjust vehicle height at the push of a button while maintaining balanced air springs. With sophisticated pressure and height algorithms, RidePro E5 control systems tune air ride suspension for proper handling and world-class ride quality, so that each time your turn the ignition key, RidePro E5 self-adjusts to ride height and compensates for changes in load. And adjusting vehicle height is as simple as choosing one of three presets. You can also control the system wirelessly by simply connecting a compatible smartphone via Bluetooth and using the RidePro E5 app. RideTech RidePro E5 systems feature and include: * Full color TFT LCD. 3.5 in. display with multi-touch capacitive touchscreen * 4-button silicone keypad with backlit symbols for quick vehicle height changes * "Ride Height On Start" automatic lift and level feature * Display and setup via control panel, smartphone app or laptop * Weatherproof ECM and heavy-duty connectors * Automatic weight compensation (with optional height sensors) * Bluetooth connectivity to most smartphones for wireless control * Aluminum 5-gallon tank * RidePro E5 digital control * Two Thomas compressors * 1/4 in. air lines and fittings * Perfect for vehicles over 3,500 lbs.
Not Yet Reviewed
$2,665.00
RideTech ShockWave 8000 air shocks feature tapered sleeve air spring bellows. This allows for a softer spring rate, longer travel, and a lower load capacity that is more appropriate for a rear installation. They are designed for rear installations on a solid rear axle where the total rear vehicle weight is 1,500-2,400 lbs. Improve handling and ride quality with these RideTech ShockWave 8000 air shocks.
( 1 )
$927.33
RideTech has upgraded the traditional notion of sway bars with their MuscleBar. Using precision CNC tubing benders, investment cast steel bar ends, and Delrin lined mount bushings, Ridetech produces sway bars with unheard of dimensional and rate accuracy. MusceBar features: * Precision CNC-bent tubing for accurate and repeatable fitment * Exact bar rates included with each bar * Delrin-lined frame mount bushings allow easy and predictable rotation over the stiction of polyurethane or rubber * Investment cast steel bar ends offer performance and appearance improvements over the traditional manufacturing * Easy installation spherical end links with barrel lock nuts * Compatible with OE manual steering, OE power steering, and aftermarket power steering conversions
( 24 )
$260.00
—
$575.00
RideTech RidePro Analog compressor systems use a 5-gallon compressor leveling system with 1/4 inch air valve, manual 4 way switches, and gauges. This 5-gallon tank and dual compressor design is recommended for vehicles 3500 pounds or more. This system includes a separate aluminum 5-gallon tank, RidePRO air valve block, 1/4 inch air lines, fittings, and wiring. Control your air ride equipped vehicle height with this affordable air suspension leveling system. RidePro analog compressor systems utilizes a high-quality solenoid air valve system, manual switches, analog gauges, and dependable electric components to provide simple and reliable air suspension leveling control.
Not Yet Reviewed
$1,620.00
RideTech HQ 7000 Series Shockwave air shocks feature a completely redesigned internal area, single-adjustable shock valving, and an impact forged body and monotube design for superior ride quality and durability. They also have easy and precise valve adjustment with 24 rebound clicks. So, if you're looking for some high-quality suspension parts for your ride, RideTech HQ 7000 Series Shockwave air shocks have you covered.
( 5 )
$945.00
RideTech StrongArm suspension systems utilize an offset trailing arm with a "trussed" design which allows maximum tire width while providing the utmost in strength. The rear trailing arms have PTFE bearings, and the strut rods are outfitted with R-joint rod ends to combine the best qualities of low-friction movement, lateral stability, full range articulation, and quiet operation into one special bearing that is as home on the street as it is on the racetrack. When combined with the tubular rear crossmember, the trailing arms place the coilovers to the rear of the axle for better motion ratio and damping control while providing additional height adjustment via the movable lower coilover mounts. Features and benefits: * Lowers vehicle ride height * Mounting hardware to maintain ground and tire clearance, driveline angles, and load capacities * Bolt-on installation (no fabrication required) * Greatly improved handling performance * Ultimate ride quality
Not Yet Reviewed
$2,555.00
RideTech RidePro-HP Ride Height sensor kits upgrade your existing RidePro E5 pressure-based system. They work together to deliver the ultimate air suspension management systems measuring both pressure and ride height accurately. With the addition of RidePro-HP, ride height and spring balance (loads) are established by comparing the position of the ride height sensor to the air pressure within each air spring. Your car is leveled with no cross loading, which is especially important for dynamic driving scenarios where quick transitions occur, such as high performance driving, sudden directional changes, and panic stops. RideTech complete RidePro-HP kits include and feature: * Four ride height sensors * Four ride height sensor linkage kits * Group harness * 1/4 in. sensor bolts with Nyloc nuts and flat washers * Mounting tabs, heat shrink tubes, and installation guide * Easy installation * Heavy-duty ride height sensors * Bendable linkage rods with rubberized rod ends * Weatherproof connectors and wiring harnesses
( 1 )
$525.00
RideTech R-joint control arm bushings feature a revolutionary design that resolves prevalent issues with other types of rod ends and bushings. They provide low-friction movement, full-range articulation, and a self-cleaning design that requires no lubrication. These bushings outlive all-metal versions that can be compromised by dirt and moisture. They provide better lateral stability than rubber, and eliminate rotational movement friction spikes and noise common with polyurethane. Whether you're on the street or the race track, you'll want the innovative advantage of RideTech R-joint control arm bushings. Features, items, and specs: * Articulates in 3 planes: 360 degree axial rotation and 30 degrees of total lateral rotation * Precision-machined 17-4 investment cast stainless steel housing with rolled threads * Polished stainless ball and RTX10 composite cage allow consistent low-friction movement * Spring-loaded closure to keep mechanism tight and rattle-free for life
( 10 )
$130.00
—
$175.00
Spanner wrenches are a must-have tool for adjusting your coilover shock absorbers. RideTech's wrenches grip the retainer under the spring to spin it and adjust the coil spring up or down. By loosening the small bolt holding the collar, you can turn it with the wrench; no need to unbolt the top of the shock. Correct adjustment of the coil spring preload is a critical step toward improved suspension and handling. RideTech machined spanner wrenches can be used manually or as an attachment on your 3/8 in. ratchet.
( 16 )
$20.00
RideTech 1965-79 F-100/F-150 IFS suspension systems are bolt-in and super stout. Significantly more rigid and stronger than the original front suspension, kits are available with RideTech tall pin or hub spindles, and each kit is designed so you can install it yourself with hand tools and a little elbow grease. Features, notes, and specs: * Replaces bulky, heavy, poor handling twin I-beam suspension with a substantial H-style design * Bolt-in cradle is super strong and strengthens the front of the truck while providing structural mounts for front control arms * Superb suspension geometry * Control arms are assembled with ball joints and Delrin® bushings for smooth, squeak-free, long-lasting performance * Upper control arm cross shaft allows for easy alignment and use of caster slugs * Adjustable steering stop on lower control arm * Increased camber gain with tall spindle, 5 to 8 degrees of caster for improved high-speed stability * Motor mount "loops" connect cradle to frame rails to reinforce frame * Front sway bar measures 1.5 in. x .250 in. wall and provides confident cornering and smooth ride * Adjustable bump stops * Rack and pinion steering conversion with 15.5 in. center-to-center bushing mounts for 79 to 93 Mustang-style steering rack * Billet adjustable tie rods * Bump steer has been virtually eliminated * High-quality satin black powdercoat finish * Entire system saves approximately 130 lbs. from front of the truck
Not Yet Reviewed
$3,995.00
—
$4,315.00
RideTech StreetGrip coil springs deliver ride quality and crisp handling. These dual-rate springs will allow your vehicle to move smoothly and effectively over small road irregularities via compliant spring rates. When your vehicle compresses the springs far enough, through large bumps or cornering, the transition to the firmer spring rates will control the bump or body roll. Even though RideTech StreetGrip springs work best as a complete system, the coil springs are compatible with other OEM components and will offer incremental performance improvements. Order the pair designed for your application.
( 19 )
$245.00
—
$285.00
RideTech HQ Series shocks influence your vehicle's handling for better performance. Your shocks are the brains of your suspension, and Ride Tech Q-Series monotube shocks out-think your OEM shocks with a wide rebound adjustment range. This allows you to tune your ride to specific driving tastes. Their larger piston and more efficient oil flow path provide cooler operating temperatures for more consistent performance. Upgrade your factory shocks and enjoy a smarter suspension—with the handling quality of RideTech HQ Series shocks, available in universal and vehicle-specific applications.
( 45 )
$255.00
—
$1,170.00
Ride Tech rear coilover upgrade packages include everything needed to give your muscle car a lowered stance with dramatically improved handling and ride quality. The systems contains rear StrongArms and either single-adjustable HQ Series or triple-adjustable TQ Series coilover shocks. Component features: * Rear StrongArms--provide added strength to help get the power to the pavement. They utilize R-Joint Technology to provide smooth operation and reduce roll bind. Lower arms feature a double sheer mount for the coilovers locating them in place of the stock springs, keeping the load where it belongs. * HQ Series coilovers--impact forged aluminum body and monotube design to deliver excellent ride quality and handling. They allow fine-tuning of the ride quality and handling. * TQ Series coilovers--remote reservoir triple-adjustable shocks feature rebound adjustment along with dual stage (high-speed and low-speed) compression adjustment. High-speed adjustment allows tuning for impact harshness and low-speed adjustment allows tuning of cornering characteristics, perfect for use on the autocross, road course, and drag strip.
( 1 )
$1,410.00
—
$2,910.00
If you need to replace OEM control arm bushings and don't have a press, make RideTech control arm bushing removal and installation tools your solution. These tools are made from top-quality materials and aid in the removal of stock upper and lower control arm bushings and the installation of RideTech Delrin bushings--with just simple hand tools.
( 57 )
$80.00
—
$135.00
RideTech front brake retention kits allow your stock calipers and rotors to be used with their TruTurn Systems. Kits include caliper brackets, steering stop, hubs, bearings, and hardware.
( 1 )
$395.00
RideTech E-coated center links feature the same ball joint technology that made them famous, ensuring that your vehicle retains crucial alignment settings for miles to come. They are built to strict tolerances using the latest innovations in steering technology, ensuring crisp, predictable handling. Center links are the critical connection between the driver side and passenger side steering. RideTech center links will maintain that connection for improved performance.
( 11 )
$85.00
—
$125.00
RideTech ball joint wedge plates correct the ball joint angles to prevent bind that occurs after lowering the upper control arm mounting holes (commonly known as the Shelby Drop). They are for use with stock upper control arms, and are offered for cars that have either 3-hole ball joints or 4-hole ball joints.
( 5 )
$140.00
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
