Availability
These CoolRide systems have the greatest application coverage and versatility of all of RideTech's systems. They will raise and lower the vehicle, improve the handling, and offer a terrific ride. On a front system, the shock is usually relocated to the outboard side of the lower control arm. A weld-on bracket mounts the top of the shock to the frame rail. On a rear system, the air spring and shock absorber will normally go in the stock locations. These CoolRide systems consist of an air spring, a shock absorber, and all of the necessary mounting bracketry and hardware.
( 2 )
$525.00
—
$775.00
RideTech AIRoverLeaf systems are completely bolt-on and require little or no modification to your vehicle. They offer great ride quality and extra load capacity without reengineering your vehicle. These systems lower vehicle ride height and improve handling by removing either one or two leaf springs. The RideTech AIRoverLeaf systems have included mounting hardware to maintain ground clearance, driveline angles, tire clearance, and load capacities.
( 3 )
$670.00
RideTech RidePro-HP Ride Height sensor kits upgrade your existing RidePro E5 pressure-based system. They work together to deliver the ultimate air suspension management systems measuring both pressure and ride height accurately. With the addition of RidePro-HP, ride height and spring balance (loads) are established by comparing the position of the ride height sensor to the air pressure within each air spring. Your car is leveled with no cross loading, which is especially important for dynamic driving scenarios where quick transitions occur, such as high performance driving, sudden directional changes, and panic stops. RideTech complete RidePro-HP kits include and feature: * Four ride height sensors * Four ride height sensor linkage kits * Group harness * 1/4 in. sensor bolts with Nyloc nuts and flat washers * Mounting tabs, heat shrink tubes, and installation guide * Easy installation * Heavy-duty ride height sensors * Bendable linkage rods with rubberized rod ends * Weatherproof connectors and wiring harnesses
( 1 )
$525.00
RideTech offers StreetGrip Delrin® control arm bushings and cross shaft sets as direct replacements for worn factory rubber bushings and control arms on popular GM muscle cars. OE rubber bushings allow too much deflection on the control arms; whereas poly bushings resist smooth rotation and impose stiction. With Delrin® bushings, you get predictable and controlled movement. This allows the shocks and springs to do their intended job of providing suspension compliance, ride quality, and performance handling. Sets include bushings, control arm shafts, and other varying components. Order the set to fit your application needs.
( 1 )
$525.00
—
$625.00
RideTech HQ Series shock kits provide a nice stance for your truck—while also correcting shock length and angle to maintain appropriate compression travel and dampening via new lower mounting brackets. Shock absorbers are the brains of your suspension; nothing influences how your auto rides and handles more than its shock absorbers. Their primary function is to control the oscillations of your vehicle's springs, thereby keeping your tires in contact with the road. To best accomplish that objective, Ridetech shock absorbers utilize monotube design which allows for a larger piston and more precise valving. The design is superior to twin tubes shocks with respect to damping and reliability. HQ Series shocks are rebound adjustable shock absorbers and offer exceptional quality—thanks to impact-forged, hard-anodized bodies and heavy-duty shafts. Order the kit recommended for your vehicle.
Not Yet Reviewed
$585.00
—
$640.00
RideTech RidePro-HP ride height sensors are the ultimate upgrade to your existing RidePro-X pressure-based system. These units work by comparing the position of the ride height sensor to the air pressure within each spring, giving you the best ride experience. The easy-to-install kits include: * Four height sensors * Four height sensor linkage kits * Wiring harness * Installation hardware
Not Yet Reviewed
$575.00
Clearance
RideTech HQ coilover kits are designed with handling performance and ride quality in mind. They feature impact-forged aluminum threaded body monotube, gas-pressurized shocks that have been clear anodized for corrosion protection. Other features include: oversized rod guides for maximum strength and durability; Delrin coilover spring washers for easy spring retainer adjustments; stainless steel mounting brackets; and CNC-machined billet hardware. The shocks include Hyperco springs (made with high-tensile premium cold-wound steel) that have a durable powdercoat finish. The unique pinch-clamp height adjusters offer finer threads for easy height adjustment. Order the kit designed for your specific vehicle.
( 14 )
$890.00
$668.50
RideTech HQ Series 4-Link coilovers feature a monotube gas pressure design that offers fade-free performance. Their springs are made of high-tensile premium steel that's CNC cold-wound. They weigh less, are more resistant to bowing, and have increased travel with a durable powdercoated finish. Machined from impact-forged aluminum for superior strength, these shocks feature a large piston that provides outstanding ride quality, a double-sealed rod guide with a dust cover that eliminates oil leakage, and an anodized finish that protects against corrosion. RideTech HQ Series 4-Link coilovers give hot rodders the ultimate in ride quality, handling, and performance. Order the kit designed for fitment on your vehicle application.
( 7 )
$620.00
RideTech offers rear lowering kits for a wide range of vehicles. They include all the necessary parts to drop the back end of your truck, such as leaf shackle hangers, axle brackets, and Delrin® leaf spring bushings. Order the rear lowering kit recommended for your specific application.
Not Yet Reviewed
$675.00
RideTech R-Joints combine all of the benefits of lateral stability, low-friction movement, full-range articulation, and quiet operation into one bearing. Their cast stainless steel housing and special Derlin AF compound will leave you with long-life durability and no need for lubrication. R-Joints also utilize a spring-loaded closure that keeps the mechanism tight and rattle-free! Upgrade your rod ends today with these RideTech R-Joints.
( 4 )
$640.00
RideTech StrongArm tubular control arms are designed to stiffen up your vehicle's chassis, while providing a smoother ride. They feature a tubular design that offers maximum strength—and are available for a variety of front and rear positions. The control arms include bushings and factory-installed ball joints (front), making installation easier. Get optimum suspension geometry with a set of RideTech StrongArm tubular control arms; order the kit recommended for your vehicle.
( 17 )
$525.00
—
$795.00
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
