Availability
RideTech drop spindles are manufactured from heavy-duty steel to give you great performance. They offer an economical way to lower your ride correctly by maintaining alignment and ride quality. The spindles are available in a variety of styles; order the pair recommended for your vehicle.
( 15 )
$315.00
—
$475.00
RideTech StrongArm tubular control arms are designed to stiffen up your vehicle's chassis, while providing a smoother ride. They feature a tubular design that offers maximum strength—and are available for a variety of front and rear positions. The control arms include bushings and factory-installed ball joints (front), making installation easier. Get optimum suspension geometry with a set of RideTech StrongArm tubular control arms; order the kit recommended for your vehicle.
( 17 )
$315.00
—
$380.00
RideTech RidePro-HP Ride Height sensor kits upgrade your existing RidePro E5 pressure-based system. They work together to deliver the ultimate air suspension management systems measuring both pressure and ride height accurately. With the addition of RidePro-HP, ride height and spring balance (loads) are established by comparing the position of the ride height sensor to the air pressure within each air spring. Your car is leveled with no cross loading, which is especially important for dynamic driving scenarios where quick transitions occur, such as high performance driving, sudden directional changes, and panic stops. RideTech complete RidePro-HP kits include and feature: * Four ride height sensors * Four ride height sensor linkage kits * Group harness * 1/4 in. sensor bolts with Nyloc nuts and flat washers * Mounting tabs, heat shrink tubes, and installation guide * Easy installation * Heavy-duty ride height sensors * Bendable linkage rods with rubberized rod ends * Weatherproof connectors and wiring harnesses
( 1 )
$525.00
RideTech has upgraded the traditional notion of sway bars with their MuscleBar. Using precision CNC tubing benders, investment cast steel bar ends, and Delrin lined mount bushings, Ridetech produces sway bars with unheard of dimensional and rate accuracy. MusceBar features: * Precision CNC-bent tubing for accurate and repeatable fitment * Exact bar rates included with each bar * Delrin-lined frame mount bushings allow easy and predictable rotation over the stiction of polyurethane or rubber * Investment cast steel bar ends offer performance and appearance improvements over the traditional manufacturing * Easy installation spherical end links with barrel lock nuts * Compatible with OE manual steering, OE power steering, and aftermarket power steering conversions
( 24 )
$260.00
—
$495.00
RideTech steering kits are available for a wide range of vehicles, from 1955 and up. They contain tie rod ends, billet tie rod adjusters, idler arms, center links, pitman arms, and more (as applicable; see photo for kit contents). The parts are built to OE specs for a perfect fit, machined to premium quality standards for great performance. Each steering kit is conveniently packaged with everything needed for your application.
( 35 )
$270.00
—
$360.00
RideTech HQ Series shocks influence your vehicle's handling for better performance. Your shocks are the brains of your suspension, and Ride Tech Q-Series monotube shocks out-think your OEM shocks with a wide rebound adjustment range. This allows you to tune your ride to specific driving tastes. Their larger piston and more efficient oil flow path provide cooler operating temperatures for more consistent performance. Upgrade your factory shocks and enjoy a smarter suspension—with the handling quality of RideTech HQ Series shocks, available in universal and vehicle-specific applications.
( 45 )
$255.00
RideTech StreetGrip coil springs deliver ride quality and crisp handling. These dual-rate springs will allow your vehicle to move smoothly and effectively over small road irregularities via compliant spring rates. When your vehicle compresses the springs far enough, through large bumps or cornering, the transition to the firmer spring rates will control the bump or body roll. Even though RideTech StreetGrip springs work best as a complete system, the coil springs are compatible with other OEM components and will offer incremental performance improvements. Order the pair designed for your application.
( 19 )
$265.00
—
$285.00
Most vintage OEM front sway bars were calibrated with tires and cornering loads that were radically less capable than today. Ride Tech increases the diameter of the sway bars to minimize body roll through the corners and optimize handling. Incorporated into the polyurethane frame bushings is a Delrin insert to eliminate stiction and allow the sway bar to move freely and improve ride quality. In addition, many stock sway bar designs create bind and poor sway bar geometry when the vehicle is lowered. Ride Tech's beefy end link-style StreetGrip sway bars eliminate that bind, correct the geometry, and reduce body roll. Where applicable, adding a rear sway bar drastically decreases body roll and increases stability. RideTech StreetGrip rear sway bars are a direct bolt-on to your OE suspension or as part of a complete StreetGrip suspension package.
( 2 )
$395.00
What a difference a few minutes can make! RideTech control arm bushing kits deliver a direct-fit Delrin system that's easy to install and offers lasting performance. Within minutes, you can swap out all of your control arm bushings for upgrades with the right stiffness, lower friction, and excellent stability—enabling you to take corners with confidence. It's a simple modification with big rewards; replace your old loose, spongy factory rubber bushings with a set of Delrin control arm bushings from RideTech for unrivaled control. Order the kit tailored for your specific vehicle application. RideTech control arm bushing kits feature points: * Bushing design eliminates control arm shift * Reduction in deflection creates more consistent and predictable handling * Trunnion design captures bushings from both sides, increasing strength and rigidity * Designed to resist binding at extreme alignment settings * CNC-machined 4130 chromoly trunnions
( 5 )
$340.00
—
$450.00
RideTech adjustable panhard bar and lowering block kits include a full-length adjustable panhard bar and lowering blocks. These kits will allow you to secure your axle in place for more predictable handling, while the lowering blocks are designed to help reduce ride height for more stable cornering. Incorporating the panhard bar mount into the lowering block allows for the use of a longer bar and corrects the bar geometry to minimize lateral axle movement and allows the axle to be centered at a lowered ride height. This also lowers the roll center to reduce body roll. The patented R-joint rod ends combine the best qualities of low friction movement, lateral stability, full range articulation, and quiet operation into one special bearing that is as home on the street as it is on the racetrack!
Not Yet Reviewed
$435.00
RideTech frame braces increase the structural rigidity of your truck or SUV by triangulating the original frame rails and crossmember. These steel reinforcements are powdercoated black to resist the elements, and are available for a wide range of applications. Order a pair to stiffen the chassis and improve the handling on your vehicle.
( 2 )
$335.00
RideTech offers C-Notch kits for a wide range of vehicles. These heavy-duty C-Notches are unlike anything else on the market—significantly longer than other designs and with reinforcements in multiple planes. They provide ample axle clearance while maintaining frame strength, both torsionally and longitudinally, even when carrying a load. Their bolt-in design increases overall suspension travel and frame strength on lowered vehicles. Grade 8 hardware, template, and installation instructions are included. Order the C-Notch kit recommended for your application.
Not Yet Reviewed
$315.00
RideTech trailing arm chassis braces connect the upper trailing arm crossmember to the lower trailing arm frame bracket, providing additional strength for high horsepower applications. The double adjustable design of the braces allow for fine fitment adjustments and omits the need for slotted holes which can slip. The braces are constructed from durable steel wall tubing, the strongest design on the market, and the brace ends are counter sunk and angle cut allowing use of shorter bolts to improve clearance, strength, aesthetics and ease of installation. The adjuster is machined from stainless steel, and tubes are black powdercoated for maximum durability. Increase stiffness of your vehicle's chassis and add additional control arm support with RideTech trailing arm chassis braces.
Not Yet Reviewed
$295.00
RideTech Wishbone brace kits are designed to give the added rear suspension support required for higher horsepower V8 applications and are for use with RideTech's Wishbone rear suspension systems. Per RideTech, they have encountered inconsistencies in the welding on the OEM gas tank crossmembers that can affect the overall strength of the crossmember. For peace of mind, they recommend using their Wishbone brace kits on high-horsepower or V8-swapped trucks.
( 1 )
$450.00
RideTech LevelTow load leveling air spring systems maximize your vehicle's safe load-carrying capacity, stability, ride quality, and brake effectiveness. LevelTow air springs provide load support through the use of air pressure that can automatically adjust for changing loads. The no-drill installation is designed specifically for this application utilizing existing holes and mounts between the frame and suspension. These RideTech systems come standard with a 30 ft. of airline and Schrader manual inflation valves.
Not Yet Reviewed
$480.00
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
