Rhodes Race Cars at Summit Racing

Rhodes Race Cars Pro Series Anti-Roll Bars

Get one of these Rhodes Race Cars Pro Series anti-roll bar/sway bar kits for your ride, and let the performance begin! They are available in 24 in. and 36 in. frame rail widths and feature 1 1/2 in. diameter, .188 in. wall 4130 chromoly shafts that pivot on PTFE bushings for smooth and controlled body roll. The 4130 weld-on arms in these RRC kits will not slip or become loose like bolt-on arms. They work on cars up to 1,500 hp and up to 4,000 lbs. RRC Pro Series anti-roll kits come complete with all mounting tabs, rod ends, and Grade 8 hardware.

4.5 out of 5 stars ( 8 )

$324.95

—

$340.00

Rhodes Race Cars Sportsman Series Anti-Roll Bars

Choose Rhodes Race Cars Sportsman Series anti-roll bar kits for your ride, and let the performance begin! They feature 1 in. diameter, .188 in. wall 4130 chromoly shafts that pivot on PTFE bushings for smooth and controlled body roll. The 4130 weld-on arms in these RRC kits will not slip or become loose like bolt-on arms. They work on cars up to 850 hp and up to 4,000 lbs., while accommodating frame rail widths up to 36 in. RRC Pro Series anti-roll kits come complete with all mounting tabs, rod ends, and Grade 8 hardware.

3.95 out of 5 stars ( 19 )

$229.95

Rhodes Race Cars Sportsman Series Wheelie Bars

Control wheel stands and put more power into moving the car forward. Get Rhodes Race Cars Sportsman Series wheelie bars for your vehicle today. Features and benefits: * Made from 1 1/8 in. diameter, .058 wall, 4130 chromoly tubing for the ultimate in strength * Main tubes come with TIG-welded wheel brackets installed * Wheel brackets are made from 4130 chromoly with a second hole to raise the wheelie bar for additional ground clearance during loading and unloading * Designed to be 70 in. from center of the rear end housing to center of the wheelie bar wheel * Comes complete with mild steel rod ends, pull pins, aluminum wheels, and all hardware necessary (welding required) * Welded kits available with lower section completely welded * Welded kits have upper bars with one threaded bung welded in; the second bung must be welded in once height has been established

4.33 out of 5 stars ( 6 )

$349.95

Rhodes Race Cars Elite Series Anti-Roll Bars

Rhodes Race Cars Elite Series anti-roll bars are available in 24 in. or 36 in. lengths. The tubes can be cut down to any desired length before welding in the splined billet shafts to the end of the tubing, which allows you to install them at any desired width for a customized fit for you ride. Kit features include: * Works great on cars up to 2500 hp and up to 3,200 lbs. * 2 in. diameter .250 in. wall 4130 tubing * 45-spline gun drilled shafts * 7075 billet aluminum splined arms * Self-aligning spherical bearings to eliminate binding * Steel bearing cups with snap rings for ease of mounting * Comes complete with mounting tabs, rod ends, and Grade 8 hardware

5.0 out of 5 stars ( 2 )

$699.95

—

$724.95

Rhodes Race Cars Elite Series HD Anti-Roll Bars

Rhodes Race Cars Elite Series HD anti-roll bars are available in 24 in. or 36 in. lengths. The tubes can be cut down to any desired length before welding in the splined billet shafts to the end of the tubing. This allows you to install them at any desired width for a customized fit for you ride. Kit features include: * Works great on cars up to 3500 hp and up to 3,200 lbs. * 2 in. diameter .250 in. wall 4130 tubing * 45-spline gun drilled shafts * 4130 billet aluminum splined arms * Self-aligning spherical bearings to eliminate binding * Steel bearing cups with snap rings for ease of mounting * Comes complete with mounting tabs, rod ends, and Grade 8 hardware

5.0 out of 5 stars ( 1 )

$724.95

—

$1,149.95

Rhodes Race Cars Sportsman Push Bars

Rhodes Race Cars Sportsman push bars are used for towing race cars around the track. They act as a location to tow or push the car. If you're headed out to the racetrack, get one of these Sportsman 7 ft. push bars by Rhodes Race Cars for your ride today! Kit includes: * 7 ft. long 1.000 in. O.D. x 0.083 in. walled 4130 chromoly tube * Threaded tube ends * Clevis brackets * Rod ends and jam nuts * Quick pins

1.0 out of 5 stars ( 1 )

$124.95

Rhodes Race Cars Pro Mod Double X-Brace Series Wheelie Bars

Rhodes Race Cars Pro Mod Double X-Brace Series Wheelie kits are designed to handle the extreme shock loads produced by Pro Mod's. These kits provide excellent stability for high performance drag racers and come complete with chromoly steel wheel brackets, mild steel rod ends, pull pins, aluminum wheels, and necessary installation hardware. Kit features: * Complete kit is made from 1 1/4 in. .065 chromoly * 4130 Chromoly construction for the ultimate in strength * Main tubes come with TIG-welded wheel brackets installed * Wheel brackets have a second hole for raising the wheelie bar during loading and unloading of the car to give you additional ground clearance * Designed to be 96 in. from center of the rear end hosing to center of the wheelie bar wheel * Full Double X-Brace design can handle extreme shock loads * Welding required for kit installation * Powdercoating available for an additional charge

Not Yet Reviewed

$849.95

Rhodes Race Cars Pro Series Push Bars

Rhodes Race Cars Pro Series push bars are perfect for moving your vehicles around. They're constructed from heavy-duty 4130 chromoly tubing and include all necessary installation hardware. Pro Series bars are for track vehicles utilizing stock rear suspension setups. Kit 29-0022 includes: * 7 ft. of 1 1/4 in. O.D. x .065 in. wall 4130 chromoly tube * 4130 threaded tube ends * 4130 chromoly clevis brackets * 4130 chromoly HD rod ends with jam nuts * T-handle style quick pins

3.0 out of 5 stars ( 3 )

$174.95

Rhodes Race Cars Pro Series Wheelie Bars

Control wheel stands and put more power into moving the car forward. Get Rhodes Race Cars Pro Series wheelie bars for your vehicle today. Features and benefits: * Upper tubes, lower main tubes, and lower cross bar are made from 1 1/4 in. diameter, .065 in. wall, 4130 chromoly tubing for the ultimate in strength * Lower diagonals (X-braces) are made from 1 1/8 in. diameter, .058 in. wall, chromoly tubing * Lower main tubes come with TIG-welded wheel brackets installed * Wheel brackets are made from 4130 chromoly with a second hole to raise the wheelie bar for additional ground clearance during loading and unloading * Designed to be 80 in. from center of the rear end housing to center of the wheelie bar wheel * Full X-brace design for the lower section * Comes complete with 4130 heavy-duty rod ends, push pull pins, steel wheels, and all hardware necessary (welding required) * Welded kits available with lower section completely welded * Welded kits have upper bars with one threaded bung welded in; the second bung must be welded in once height has been established

Not Yet Reviewed

$549.95

Rhodes Race Cars Competition Roll Cages

Rhodes Race Cars competition roll cages meet or exceed NHRA and IHRA requirements (when properly installed). Available in 4, 6, 8, and 10-point models, all RRC bars are precision bent for each particular body style and feature notched tube ends (where applicable) for ease of installation. Increase chassis stiffness, and race safe with Rhodes Race Cars competition roll cages. RRC roll bars and cages are available in the following materials: * 1-3/4 in. x .134 in. wall mild steel tubing * 1-3/4 in. x .120 in. wall DOM tubing * 1-3/4 in. x .083 in. wall 4130 chromoly tubing The 4-point kits include main hoop, rear braces, seat crossmember, and four steel mounting plates. The 6-point kits include main hoop, rear braces, side bars, seat crossmember, and six steel mounting plates. The 8-point kits include main hoop, rear braces, side bars, frame supports, seat crossmember and 6 steel mounting plates. The 10-point kits include everything in the 8-point kits, plus a roof hoop, windshield runners, and dash crossmember. Note: Because of differing driver positions and main hoop locations, roof hoop and windshield down bars are not notched!

3.7 out of 5 stars ( 141 )

$334.95

—

$874.95

Rhodes Race Cars Funny Car Cage Conversion Kits

Rhodes Race Cars Funny Car cage conversion kits include all the tubing necessary to upgrade your existing roll cage. These conversion kits can be installed in virtually any existing roll cage or tube chassis vehicle. The tubing is purposely left long so that it can be cut to fit to your vehicle's particular chassis application. Funny Car cage conversion kits are available in the following materials: * 1 5/8 in. X .134 in. wall ERW mild steel * 1 5/8 in. X .120 in. wall DOM * 1 5/8 in. X .083 in. wall chromoly

3.83 out of 5 stars ( 6 )

$249.95

—

$324.95

Rhodes Race Cars SCCA, NASA, and Drift Roll Cages

Rhodes Race Cars SCCA, NASA, and Drift roll cages are made specifically for hobbyists and for serious racers looking to compete in SCCA, NASA, or Formula D events. All road race cages feature a main hoop diagonal and dual door bars (can be made into dual X-bars). They are weld-in cages and feature notched tube ends (where applicable) for ease of installation. Roll cages are offered in these materials: * 1 5/8 in. O.D. 0.134 in. wall ERW mild steel tubing * 1 5/8 in. O.D. 0.120 in. wall DOM tubing * 1 5/8 in. O.D. 0.083 in. wall 4130 chromoly tubing DOM tubing is very strongly recommended; ERW cages will most likely NOT pass tech inspection for most classes. Chromoly is not recommended by most sanctioning bodies. Due to different requirements for specific classes and weights, you should check with your track or sanctioning body for specific guidelines prior to purchase. It is the installer's responsibility to assure that a cage meets race organization rules as to tubing material and sizes, fit, placement of components, and welding. Note: Because of differing driver sizes and main hoop locations, roof hoop and windshield down bars are not notched. Some minor trimming may be required during installation.

5.0 out of 5 stars ( 2 )

$574.95

—

$999.95

Rhodes Race Cars Roll Cage Conversion Kits

Rhodes Race Cars roll cage conversion kits are designed to convert your existing roll bar into a 10, 12 or even 14-point roll cage. RRC conversion kits meet or exceed the NHRA and IHRA requirement for roll cage tubing. These kits include roof tubes, windshield post runners, and dash crossmember. Conversion kits may be available in any of the following materials: * 1-5/8 in. x .134 in. wall mild steel tubing * 1-5/8 in. x .120 in. wall DOM tubing * 1-5/8 in. x .083 in. wall 4130 chromoly tubing Note, because of differing driver sizes and main hoop locations, these kits are not notched!

3.67 out of 5 stars ( 6 )

$124.95

—

$474.95

Rhodes Race Cars Lemons and Chumps Roll Cages

Rhodes Race Cars Lemons and Chumps roll cages are specifically designed for those of you looking to compete in 24 Hour of Lemons and ChumpCar Series races. RRC has taken out all of the guess work and come up with these easy-to-install kits. All the tubing is pre-bent and notched for ease of installation. Rhodes Race Cars Lemons and Chumps roll cages are available in ERW mild steel, DOM, and chromoly. ERW mild steel is accepted by both sanctioning bodies, but DOM is very strongly recommended. Chromoly is generally NOT recommended for this type of racing. Check your sanctioning body's rules before you order! Note: Some minor trimming may be required during installation. All RRC cages are weld-in cages.

1.0 out of 5 stars ( 4 )

$574.95

—

$999.95

Rhodes Race Cars Elite Series Swing-Out Door Bar Kits

Rhodes Race Cars Elite Series swing-out door bar kits enable you to convert your existing side bar to a more convenient swing out model, making entering and exiting your race car easier. RRC offers a choice of tubing diameters and thicknesses in mild steel, DOM, or chromoly. The Elite Series comes with male and female clevises that can be used with all roll bars and cages, as well as necessary components and hardware to complete one door side bar. Want easier access to your race car? RRC has the solution with their Elite Series swing-out door bar kits.

4.79 out of 5 stars ( 38 )

$124.95

Rhodes Race Cars Double-Adjustable Ladder Bar Kits

Rhodes Race Cars double-adjustable ladder bar kits are available in mild steel or chromoly. These RRC bars highlight their unique design that reduces binding and side load on the ladder bars, making re-installing them after adjustments a breeze. RRC ladder bar kits feature either 1 in. diameter .156 wall DOM tubing, or 1 3/8 in. lower and 1 1/4 in. upper .095 wall chromoly tubes. Rhodes Race Cars double-adjustable ladder bar kits include: * Durable black powdercoated finish * Rod end safety loops * Rod ends, adjusters, jam nuts, and Grade 8 hardware * Sportsman housing brackets * Set up for 33 in. from center of housing to center of rod end

4.5 out of 5 stars ( 2 )

$299.95

—

$499.95

Rhodes Race Cars Pro Series Swing-Out Door Bar Kits

Rhodes Race Cars Pro Series swing-out door bar kits make it easy to convert your existing side bar to a more convenient swing out model. RRC offers a choice of tubing diameters and thicknesses in mild steel, DOM, or chromoly. The Pro Series comes with clevises and 1/2 in. thick mild steel brackets, as well as necessary components and hardware that can be used with all roll bars and cages. One kit completes one door side bar. Want easier access to enter and exit your race car? RRC has the answer with their Pro Series swing-out door bar kits.

4.71 out of 5 stars ( 14 )

$74.95

Rhodes Race Cars Ladder Bar Crossmembers

Rhodes Race Cars ladder bar crossmembers are strong tubular steel reinforcements and perfect for your ride. They're made from either 1 3/4 or 1 5/8 in. O.D. mild steel tubing with a .134 in. thick wall, a 3 in. drop in the center of the tube, and an overall width of 60 in.

4.57 out of 5 stars ( 7 )

$49.95

Rhodes Race Cars Anti-Roll Bar Link Kits

Rhodes Race Cars anti-roll bar link kits are available in different levels (Sportsman, Pro, and Elite) to match the horsepower and weight of the vehicle. These anti-roll bar link kits offer several benefits for high-horsepower drag racing vehicles, primarily improving stability and consistency during launches and high-speed runs. They help to minimize body roll, reduce uneven weight transfer, and ensure both rear wheels lift evenly during acceleration, leading to a more controlled and predictable launch. This ultimately translates to better performance and faster times at the track. Each kit comes with all necessary components for installation. These anti-roll bar link kits require welding for proper mounting/installation.

Not Yet Reviewed

$74.95

—

$124.95

Rhodes Race Cars Wheelie Bar Wheels

Wheelie bars are the safety mechanism required behind many powerful race cars, especially dragsters. They're there to make contact with the ground and prevent the car from flipping over if the launch sends your front-end too far off the track. Rhodes Race Cars wheelie bar wheels are quality aluminum replacement parts, molded with a polyurethane material that won't dent or give like a rubber wheel can. The wheels feature a 4 in .O.D. with 1 5/8 in. wide wheel hub and utilize a 3/8 in. shoulder bolt (sold separately).

5.0 out of 5 stars ( 4 )

$20.00

—

$25.00

Rhodes Race Cars Wheelie Bar Brackets

Rhodes Race Cars wheelie bar mounting brackets are fabricated for "standing" performance. RRC offers a choice of kits that are made to weld to 3 in. axle tubes or 2 in. x 3 in. back braces. Both kits include necessary hardware.

4.5 out of 5 stars ( 2 )

$54.95

—

$74.95

Rhodes Race Cars Roll Bar Mounting Plates

Rhodes Race Cars offers a variety of roll bar components, including these steel roll cage floor plates. The 1/8 in. mounting plates measure 6 in. x 6 in. and are available individually or in a set of six.

Not Yet Reviewed

$3.99

—

$24.95

Rhodes Race Cars Roll Bar Bolt-In Conversion Kits

Rhodes Race Cars roll bar bolt-in conversion kits allow you to bolt in any 4 to 8-point roll bar without welding base plates to the floor. They use 1/8 in. thick, 6 in. x 6 in. steel plates, which are positioned under the floor to sandwich the existing roll bar plates together. The conversion kits include Grade 8 mounting bolts and hardware. Drilling and welding are required for installation.

Not Yet Reviewed

$24.95

Rhodes Race Cars Roll Bar Padding

Rhodes Race Cars roll bar padding features offset holes, providing more padding where it's needed on the driver side. It comes in a variety of colors for a custom installation.

Not Yet Reviewed

$7.95

52 Results Found For "bars"