Availability
Get one of these Rhodes Race Cars Pro Series anti-roll bar/sway bar kits for your ride, and let the performance begin! They are available in 24 in. and 36 in. frame rail widths and feature 1 1/2 in. diameter, .188 in. wall 4130 chromoly shafts that pivot on PTFE bushings for smooth and controlled body roll. The 4130 weld-on arms in these RRC kits will not slip or become loose like bolt-on arms. They work on cars up to 1,500 hp and up to 4,000 lbs. RRC Pro Series anti-roll kits come complete with all mounting tabs, rod ends, and Grade 8 hardware.
( 8 )
$324.95
—
$340.00
Choose Rhodes Race Cars Sportsman Series anti-roll bar kits for your ride, and let the performance begin! They feature 1 in. diameter, .188 in. wall 4130 chromoly shafts that pivot on PTFE bushings for smooth and controlled body roll. The 4130 weld-on arms in these RRC kits will not slip or become loose like bolt-on arms. They work on cars up to 850 hp and up to 4,000 lbs., while accommodating frame rail widths up to 36 in. RRC Pro Series anti-roll kits come complete with all mounting tabs, rod ends, and Grade 8 hardware.
( 19 )
$229.95
Control wheel stands and put more power into moving the car forward. Get Rhodes Race Cars Sportsman Series wheelie bars for your vehicle today. Features and benefits: * Made from 1 1/8 in. diameter, .058 wall, 4130 chromoly tubing for the ultimate in strength * Main tubes come with TIG-welded wheel brackets installed * Wheel brackets are made from 4130 chromoly with a second hole to raise the wheelie bar for additional ground clearance during loading and unloading * Designed to be 70 in. from center of the rear end housing to center of the wheelie bar wheel * Comes complete with mild steel rod ends, pull pins, aluminum wheels, and all hardware necessary (welding required) * Welded kits available with lower section completely welded * Welded kits have upper bars with one threaded bung welded in; the second bung must be welded in once height has been established
( 6 )
$349.95
Rhodes Race Cars Elite Series anti-roll bars are available in 24 in. or 36 in. lengths. The tubes can be cut down to any desired length before welding in the splined billet shafts to the end of the tubing, which allows you to install them at any desired width for a customized fit for you ride. Kit features include: * Works great on cars up to 2500 hp and up to 3,200 lbs. * 2 in. diameter .250 in. wall 4130 tubing * 45-spline gun drilled shafts * 7075 billet aluminum splined arms * Self-aligning spherical bearings to eliminate binding * Steel bearing cups with snap rings for ease of mounting * Comes complete with mounting tabs, rod ends, and Grade 8 hardware
( 2 )
$699.95
—
$724.95
Rhodes Race Cars Elite Series HD anti-roll bars are available in 24 in. or 36 in. lengths. The tubes can be cut down to any desired length before welding in the splined billet shafts to the end of the tubing. This allows you to install them at any desired width for a customized fit for you ride. Kit features include: * Works great on cars up to 3500 hp and up to 3,200 lbs. * 2 in. diameter .250 in. wall 4130 tubing * 45-spline gun drilled shafts * 4130 billet aluminum splined arms * Self-aligning spherical bearings to eliminate binding * Steel bearing cups with snap rings for ease of mounting * Comes complete with mounting tabs, rod ends, and Grade 8 hardware
( 1 )
$724.95
—
$749.95
Rhodes Race Cars Pro Mod Double X-Brace Series Wheelie kits are designed to handle the extreme shock loads produced by Pro Mod's. These kits provide excellent stability for high performance drag racers and come complete with chromoly steel wheel brackets, mild steel rod ends, pull pins, aluminum wheels, and necessary installation hardware. Kit features: * Complete kit is made from 1 1/4 in. .065 chromoly * 4130 Chromoly construction for the ultimate in strength * Main tubes come with TIG-welded wheel brackets installed * Wheel brackets have a second hole for raising the wheelie bar during loading and unloading of the car to give you additional ground clearance * Designed to be 96 in. from center of the rear end hosing to center of the wheelie bar wheel * Full Double X-Brace design can handle extreme shock loads * Welding required for kit installation * Powdercoating available for an additional charge
Not Yet Reviewed
$849.95
Control wheel stands and put more power into moving the car forward. Get Rhodes Race Cars Pro Series wheelie bars for your vehicle today. Features and benefits: * Upper tubes, lower main tubes, and lower cross bar are made from 1 1/4 in. diameter, .065 in. wall, 4130 chromoly tubing for the ultimate in strength * Lower diagonals (X-braces) are made from 1 1/8 in. diameter, .058 in. wall, chromoly tubing * Lower main tubes come with TIG-welded wheel brackets installed * Wheel brackets are made from 4130 chromoly with a second hole to raise the wheelie bar for additional ground clearance during loading and unloading * Designed to be 80 in. from center of the rear end housing to center of the wheelie bar wheel * Full X-brace design for the lower section * Comes complete with 4130 heavy-duty rod ends, push pull pins, steel wheels, and all hardware necessary (welding required) * Welded kits available with lower section completely welded * Welded kits have upper bars with one threaded bung welded in; the second bung must be welded in once height has been established
Not Yet Reviewed
$549.95
Rhodes Race Cars double-adjustable ladder bar kits are available in mild steel or chromoly. These RRC bars highlight their unique design that reduces binding and side load on the ladder bars, making re-installing them after adjustments a breeze. RRC ladder bar kits feature either 1 in. diameter .156 wall DOM tubing, or 1 3/8 in. lower and 1 1/4 in. upper .095 wall chromoly tubes. Rhodes Race Cars double-adjustable ladder bar kits include: * Durable black powdercoated finish * Rod end safety loops * Rod ends, adjusters, jam nuts, and Grade 8 hardware * Sportsman housing brackets * Set up for 33 in. from center of housing to center of rod end
( 2 )
$299.95
—
$499.95
Rhodes Race Cars ladder bar crossmembers are strong tubular steel reinforcements and perfect for your ride. They're made from either 1 3/4 or 1 5/8 in. O.D. mild steel tubing with a .134 in. thick wall, a 3 in. drop in the center of the tube, and an overall width of 60 in.
( 7 )
$49.95
Rhodes Race Cars anti-roll bar link kits are available in different levels (Sportsman, Pro, and Elite) to match the horsepower and weight of the vehicle. These anti-roll bar link kits offer several benefits for high-horsepower drag racing vehicles, primarily improving stability and consistency during launches and high-speed runs. They help to minimize body roll, reduce uneven weight transfer, and ensure both rear wheels lift evenly during acceleration, leading to a more controlled and predictable launch. This ultimately translates to better performance and faster times at the track. Each kit comes with all necessary components for installation. These anti-roll bar link kits require welding for proper mounting/installation.
Not Yet Reviewed
$74.95
Wheelie bars are the safety mechanism required behind many powerful race cars, especially dragsters. They're there to make contact with the ground and prevent the car from flipping over if the launch sends your front-end too far off the track. Rhodes Race Cars wheelie bar wheels are quality aluminum replacement parts, molded with a polyurethane material that won't dent or give like a rubber wheel can. The wheels feature a 4 in .O.D. with 1 5/8 in. wide wheel hub and utilize a 3/8 in. shoulder bolt (sold separately).
( 4 )
$20.00
—
$25.00
Rhodes Race Cars wheelie bar mounting brackets are fabricated for "standing" performance. RRC offers a choice of kits that are made to weld to 3 in. axle tubes or 2 in. x 3 in. back braces. Both kits include necessary hardware.
( 2 )
$54.95
—
$74.95
Rhodes Race Cars Sportsman Series anti-roll bar bushings offer several benefits for drag racing vehicles. They provide smooth and controlled body roll, reducing weight transfer to one side during launches and preventing the car from leaning excessively in turns. This leads to more consistent and stable launches, improved handling, and reduced risk of losing traction. The bushings PTFE material also helps ensure smooth, friction-free movement.
Not Yet Reviewed
$49.95
Rhodes Race Cars Pro Series anti-roll bar bushings offer several benefits, particularly for high-horsepower drag racing applications. They are designed to provide smooth and controlled body roll, reducing weight transfer to one side of the vehicle during launches and preventing the car from leaning excessively in turns. This leads to more consistent and stable launches, improved handling, and reduced risk of losing traction. The Pro Series bushings PTFE material also helps ensure smooth, friction-free movement.
Not Yet Reviewed
$74.95
Rhodes Race Cars Pro Series wheelie bar mounting brackets locate on the rear-end housing axle tubes. They're made from 3/16 in. thick steel and are made to weld to 3 in. axle tubes. * Includes necessary hardware * 1/2 in. bolt holes to match Rhodes Pro and Elite Series wheelie bar kits * Requires welding during installation
Not Yet Reviewed
$82.99
Rhodes Race Car ladder bar crossmember brackets can assist with your chassis fabrication. The tabs are made from 3/16 in. thick mild steel, and include five 3/4 in. adjustment holes. These brackets will work with a variety of crossmember sizes, depending on the set you order.
( 3 )
$74.95
Custom work beneath the chassis requires fabrication accessories—like Rhodes Race Cars Sportsman Series ladder bar brackets. These welding tabs are made from 3/16 in. thick mild steel, and are designed to work with 3 in. axle tubes. Their 3/4 in. bolt holes are spaced 8 in. on-center. Order a set of ladder bar housing brackets for your rear-end project.
( 3 )
$74.95
Rhodes Race Cars Pro Series ladder bar housing brackets are 360 degree chassis tabs designed for 3 in. axle tubes. Made from 3/16 in. thick mild steel with 3/4 in. bolt holes and 8 in. centered hole spacing, these rear-end brackets feature integrated shock mounts and wheelie bar mounts.
Not Yet Reviewed
$124.95
Rhodes Race Cars Elite Series ladder bar brackets can help facilitate your chassis or suspension fabrication project. They're made from 3/16 in. chromoly, and are designed for 3 1/2 in. axle tubes with 3/4 in. bolt holes and an 8 in. centered hole spacing. These 360 degree ladder bar brackets come in a set of four and have integrated shock mounts and wheelie bar mounts.
Not Yet Reviewed
$199.95
Rhodes Race Cars gussets are available in multiple styles, such as triangular steel and chromoly round tube. These fabrication accessories enable you to reinforce and strengthen your roll cage, chassis, suspension, or other applications. They're also valuable when building or adding components to your vehicle. Gussets can be attached via fasteners or welding, depending on the material. Handling and safety are primary concerns with a race car. Bolster your frame connections with a set of Rhodes gussets.
( 4 )
$19.95
—
$20.95
Rhodes Race Cars Elite Series wishbone kits are the best way to keep your rear-end centered in the vehicle. These RRC kits eliminate the binding that can occur when using a diagonal link or panhard bar. Rhodes Elite wishbone kits include: * 1 in. diameter .083 in. wall 4130 chromoly tubing * 4130 chromoly greaseable slide tube * 4130 chromoly billet chassis mounts * 4130 Elite Series housing mount * 4130 RRC Elite HD rod ends * NAS hardware
( 1 )
$299.95
Rhodes Race Cars Sportsman Series diagonal links offer a very simple and cost effective method to center and stiffen your rear end. Diagonal links can be used on ladder bar or 4-link suspensions. Get one of these RRC diagonal link kits for your ride today. Kit comes complete with: * 36 in. x 1 in. diameter, .083 in. wall, 4130 chromoly tubing * 4130 threaded tube adapters * Mild steel clevis brackets * Mild steel rod ends * Grade 8 hardware Note: Kits require welding during installation.
( 4 )
$124.95
Rhodes Race Cars Sportsman Series wishbones are the best way to keep your rear-end centered in the vehicle. These RRC kits eliminate the binding that can occur when using a diagonal link or panhard bar. They are available as weld-on or bolt-on chassis mounts (housing mounts are weld-on). RRC Sportsman kits come complete with: * 1 in. diameter, .065 in. wall 4130 chromoly tubing * 4130 chromoly slide tube * Mild steel rod ends * Grade 8 hardware
( 3 )
$174.95
Rhodes Race Cars Pro Series 4-link suspension kits are for competitive racers building their performance ride. Package specs and features: * 1/4 in. mild steel Sportsman Series housing and chassis brackets * Housing brackets have integrated shock and wheelie bar mounts * Housing brackets are for 3 in. axle housing tubes * 1 1/4 in. O.D. .095 wall chromoly 4-link tubes * 4 left and 4 right hand 3/4 in.-16 weld-in threaded bungs * Coilover shock mounting kit * Grade 8 mounting hardware * Overall length is 18 in.
( 3 )
$299.95
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
