Availability
The Radium Engineering Direct Mount Regulator (DMR) is a compact high performance adjustable EFI fuel pressure regulator designed with a unique highly versatile mounting system. It can be mounted directly to a compatible fuel rail port using the included 360 degree swiveling adapter, or mounted remotely away from the fuel rail. The compact size fits in areas with limited space without sacrificing performance. This regulator is safe to use with all gasoline and ethanol blends of fuel. The main inlet port on the regulator is female threaded for 6 AN ORB. A swiveling double-ended adapter is included with the kit that allows the regulator to be used in any compatible 8 AN ORB fuel rail port, such as those found on Radium Engineering fuel rails. The return port on the bottom is threaded for 6 AN ORB. The provided 90-degree 6 AN male fuel return fitting can swivel 360 degrees, permitting a multitude of mounting configurations. Other adapter fittings can be installed in the return port if needed (sold separately). Unlike the previous generation, this DMR has two 1/8 in. NPT side port locations that can be used with a pressure gauge, transducer, temperature probe, etc. Two 1/8 in. NPT plugs are provided. Fuel pressure is dialed in using the preloaded set screw on top of the regulator. Two interchangeable orifices are included with calculated flow diameters to match the fuel pump flow to the regulator. This permits the DMR to be used with practically any horsepower engine. This added precision will resist diaphragm flutter and optimize pressure stability. This design has been tested to regulate over 1,200 liters per hour. What's included: * Fuel Pressure Regulator (black or green anodized top) * Swiveling inlet adapter fitting (for 8 AN ORB fuel rail) * PTFE impregnated 1/8 in. NPT plugs (x2) * 6 AN male swivel (for return line) * Return orifices (silver orifice pre-installed)
( 1 )
$170.95
The opening and closing of fuel injectors creates pressure pulses in the fuel rail which can lead to unstable fuel pressure. In order to achieve a safe and consistent rail pressure, a Radium Engineering fuel pulse damper (FPD) is often necessary. The FPD's internal diaphragm will absorb oscillating pulses and stabilize fuel pressure. This correction can be measured throughout the RPM range and often help idle surge, especially with high-flow injectors. A fuel pulse damper can also solve erratic lean air/fuel ratio spikes, commonly experienced as "stumbling," that are difficult to tune out. What makes Radium FPDs unique?: Along with having the flexibilty of using common fittings, Radium Engineering FPD's use a vacuum/boost reference port which allows for proper fuel pulse damper performance even at elevated fuel pressures. This becomes essential for boosted systems that use a 1:1 rising rate fuel pressure regulator. Features: The anodized aluminum housing features two selectable threaded male fittings. The 8 AN ORB version seals using a FKM O-ring, while the 3/8 in. NPT variation seals with the tapered pipe threads. * The FPDs can be mounted at any possible angle including upside down. For best results, the damper should be mounted directly onto the fuel rail(s). These products are safe for use with all fuel types, including alcohol blends such as E85. (Not recommended for the low-pressure side of mechanical fuel pumps.) Included: * Anodized and laser engraved aluminum top, R=range or XR=extra range * Anodized aluminum body with male threads, 8 AN ORB or 3/8 in. NPT * Stainless steel hardware * Rubber vacuum hose, 4mm I.D. * Vacuum hose Y-fitting
Not Yet Reviewed
$113.95
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
