Availability
On Sale
If you're unable to use a thermocouple-style assembly due to limited space availability, Racepak liquid temperature sensors are a great alternate choice. These replacement sensors are for use with Vnet modules and require the adapter harness.
( 2 )
$89.95
All Racepak V-Net systems must be equipped with a tee cable to install the two terminator caps (one male and one female) necessary for the operation of the system. Just like the ends on the V-Net cables, all V-Net tee cables and terminator caps are blue. Racepak interface modules can also use tee cables, but they are not required for the system to operate properly. Instead, they allow you to create a branch in the system. Black interface tee cables and dust caps are used for the purposes their names indicate. Racepak gauge tee cables are used to connect Intelli-Gauges to a V-Net cable. After the first gauge, each subsequent gauge is connected with a gauge-to-gauge jumper cable.
( 1 )
$69.95
—
$99.95
Racepak V-Net 5-pin cables are designed to connect multiple sensors to tee cables—which are then connected to the V-Net port and Racepak dash. They're manufactured from high-quality wire and feature pre-terminated Weather Pack connectors for a quick installation and easy removal.
( 2 )
$84.95
—
$104.95
Racepak serial communications cables are used to transmit or download information from the V300/V300SD/V500 data recorders and your computer. There are a number of options available, such as serial to USB port, so you can find the cable that's right for your application. Load up Racepak, keep your data handy, and start your engines.
( 6 )
$74.95
—
$99.95
Racepak oil pressure sensors are single-wire sensors commonly used to pick up fluid temperatures on the Racepak IQ3 and UDX Street Dashes, as well as the LDX. They are designed to measure the temperature of fluids, such as water or engine and transmission oil, where the temperature does not exceed 250 degrees F.
( 1 )
$72.45
On Sale
Racepak magnetic pick-up collars provide a mounting platform for up to eight magnets. This allows them to pick up driveshaft rpm faster than typical 2-magnet designs. Simply mount them on your rear-end yoke or coupler, then set up your sensor. They're available in several popular diameter sizes, and are perfect for automatic-equipped vehicles. Increase your data gathering efficiency with Racepak magnetic pick-up collars.
Not Yet Reviewed
$139.95
$90.95
Attach your Racepak or Haltech IQ3 display dash with ease—using one of the Racepak IQ3 mount brackets. These sleek looking dash brackets allow custom mounting within your gauge cluster area. The aluminum mount brackets feature a center hole cutout with pre-drilled holes to facilitate installation. They're available in a natural aluminum or anodized black finish.
( 2 )
$69.95
Racepak IQ3 dash harnesses are perfect replacements for your broken, cut, or even frayed wiring harnesses. Perfectly paired with the IQ3 display dash, you can be sure that these easy to use and easy to connect wiring harnesses will get your display back up in no time, while accurately reading every critical parameter of your application.
Not Yet Reviewed
$99.95
Racepak OBD II V-Net interface cables offer an easy, cost-effective way to access information from your Racepak V-Net data-logger and display products. These modules enable you to record, download, and graph data the same as standard external sensors. Installation is as simple as plugging in two connectors! Detection and programming take just minutes, enabling you to record or display data in a short period of time.
Not Yet Reviewed
$99.95
On Sale
Racepak USM connector cables are designed to allow easy connection of Racepak Universal Sensor Modules to a variety of data acquisition components. They are available to connect fluid temperature, rpm, shock travel, ride height, infra-red temperature, 0 to 5 V, and TI-style pressure sensors.
Not Yet Reviewed
$65.89
Racepak Smartwire connectors are replacements to repair or replace a 23-pin connector on the harness going to the Racepak Smartwire. Plug and pins are included.
Not Yet Reviewed
$55.39
On Sale
Racepak Smartwire to Switch Panel Cables are the quickest and easiest way to connect a switch panel, switch module, or keypad to the Racepak Smartwire unit. Ranging from 6 in. to 10 ft., these cables are the perfect choice for almost any application from drag racing to off-road and even pulling! Connect your remote module with Racepak Smartwire to switch panels today!
Not Yet Reviewed
$109.95
$57.95
—
$109.95
Racepak interface 7-pin cables are available in multiple lengths to extend analog and interface module connections on Racepak V300SD, V500SD and G2X Pro data loggers. They are made of high-quality materials to provide long-lasting durability and performance. If you need to extend your analog or interface connections, Racepak interface extension cables can make it happen.
Not Yet Reviewed
$87.15
—
$99.95
Racepak ride height sensor aperture kits are designed to proactively protect the lens of the Racepak ride height sensor from rocks, dirt, and other flying debris. Your sensor is typically mounted in a vulnerable position, and therefore requires extra shielding to ensure proper functioning under the most demanding conditions. That makes Racepak ride height sensor aperture kits a frugal investment that can help you avoid costly, unnecessary replacement expenses.
Not Yet Reviewed
$99.95
Racepak offers replacement connectors and wiring harnesses for the UDX Street Dash data logging system. Ensure that your automotive functions are monitored and displayed properly. Replace faulty wiring with a new harness from Racepak Data Systems.
( 1 )
$61.39
On Sale
Racepak ECU interface cables are adapter harnesses used to connect the CAN bus data stream from your existing ECU to a Racepak IQ3S (Street Dash), IQ3D (Drag Dash), or Racepak Universal CAN module. Once this CAN cable is connected and properly set up, data from the ECU is then available for use with the Racepak IQ3S, IQ3D or Racepak Universal CAN module.
Not Yet Reviewed
$99.95
$54.97
—
$99.95
Racepak IQ3 remote buttons connect to the IQ3 digital dash via the harness—to program and advance through the data logging screens. These accessories are invaluable to your IQ3 system.
Not Yet Reviewed
$59.95
Clearance
Racepak V-Net modules work with the V-Net "smart data" transfer network to help you monitor a variety of functions and components on your vehicle. They feature plug-and-play installation on the V-Net cable for collecting the specific data you require. All connected modules are in series, so they can be installed and/or replaced in any sequence. Go ahead and build anything from a simple dash setup to a full-blown data acquisition system with Racepak V-Net modules. Browse through the various types to determine which functions or components you want your V-Net system to monitor.
( 1 )
$106.95
$69.50
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
