Availability
Pacific Performance Engineering MicroPure Extreme-Performance engine oil filters offer 2.5 times the filtration area of a conventional oil filter, providing the performance your engine oil needs to stay cleaner and for longer periods. Specially engineered synthetic filtration media achieves superior filtration to trap particles down to 5 microns, while a high-powered magnet secured at the bottom of the filter catches metal debris, preventing it from clogging the filter media and prolongs oil life. MicroPure's bypass valve is 10 psi stiffer than the OEM bypass valve and reduces the chance of dirty oil bypassing, and a heat-resistant silicone anti-drain-back valve retains the oil in the filter after the engine is turned off. With increased filtration area, four times finer media, and prolonged filter life, the PPE MicroPure Extreme-Performance filter is the ultimate choice for your engine. Additional features and notes: * 900 sq. in. of premium composite filtration media, a 150 percent increase over stock * Perforated metal core and spiral-wrapped adhesive secures filter media * 3/16 in.-16 UNF threaded baseplate with 47 percent larger passages * Direct replacement for the stock oil filter * High-power internal Neodymium magnet * 50 percent thicker base plate * Withstand 450 psi maximum burst pressure * TorqueStop feature to ensure a tight seal * Reinforced silicone anti-drain-back valve ensures a unidirectional flow
( 1 )
$35.99
Pacific Performance Engineering Premium high-efficiency engine oil filters offer more than double the surface area of a conventional oil filter and are just what your engine oil needs to stay cleaner, longer. Specially engineered synthetic filtration media achieves superior filtration that catches and holds minute dirt and particle down to 5 microns. A high-power magnet is secured at the bottom of the filter to catch any large metal debris and prevent them from clogging the filter media. The base plate and cannister are both enhanced with thicker materials. With twice the surface area, filtration and filter life of conventional filters, the PPE Premium high-efficiency engine oil filters should be your number one choice for superior oil filter performance.
( 2 )
$22.49
—
$26.99
Pacific Performance Engineering race fuel pressure relief valves are designed to replace the stock original. Machined from heat-treated stainless steel, these fittings help maintain fuel rail pressure during heavy engine load conditions. The PPE valves eliminate the potential low pressure DTC codes P1093 or P0087 (during power enrichment) caused by insufficient pressure relief valve spring pressure. Order the model recommended for your application.
( 11 )
$22.49
—
$41.39
Pacific Performance Engineering knows the huge stresses that drag racing and sled pulling put on your diesel's parts. Their silicone tubing couplers were designed to handle the rigors of long-distance towing, racing, and pulling competitions! They are made to be strong and durable, with five plies of polyester reinforced fibers. A chemical, oil, fuel, UV, and ozone-resistant fluorocarbon lining gives PPE silicone couplers the strength to withstand the exposure to heavy usage and bring reliable, long-lasting performance. Their silicone rubber construction ensures constant boost pressures from -76 degrees F to 437 degrees F. They won't blow out like stock hoses will! In short, Pacific Performance Engineering silicone tubing couplers are a smart choice for your high performance diesel!
( 15 )
$22.49
—
$53.99
Secure your pipes with Pacific Performance Engineering up-pipes bolt sets. Each set includes Class 12.9 alloy steel 12-point screws with a black oxide finish and are engineered to be better. PPE's OEM design features an increased thread length to accommodate washer thickness (washers are included), two screws that are 5 mm longer to accommodate the downpipe mounting bracket, and this PPE design preserves thread engagement whereas others do not. Contents: * (10) M10 x 1.5 x 32 bolt and washer * (12) M10 washers * (2) M10 x 1.5 x 37 bolt and washer
( 1 )
$35.99
Pacific Performance Engineering offers transmission pan filters for a variety of cars and trucks, including many Jeep, Dodge, and Ram models from 2014 and up. These replacement filters are easy to swap out when you change the fluid in your 8HP70 transmission. The filters are designed to fit the following PPE heavy-duty aluminum transmission pans: 228053000 and 228153000.
Not Yet Reviewed
$26.99
While the OEM coolant block-off plates use a gasket and can leak over time, PPE's billet block-off plates are thicker and use Viton® O-ring seals for maximum longevity. They are CNC-machined from billet aluminum with a leak-free design, and install using the OEM fasteners. Pacific Performance Engineering coolant block-off plates are available with a black or raw finish etched with the PPE logo. Select the one preferred for your diesel.
Not Yet Reviewed
$53.99
Pacific Performance Engineering fuel inlet fittings facilitate the best fuel flow possible. Machined from steel or stainless steel, the fittings feature larger inner diameters which allow fuel to flow 70 percent more efficiently than with your restrictive stock unit. This can also eliminate possible cavitation damage from excessive suction. With a greater volume of fuel available from PPE fuel inlet fittings, your injection pump will be able to perform at its optimum capability. The fittings are available in multiple styles and sizes; order the adapters best suited for your fuel plumbing application.
( 3 )
$31.49
Pacific Performance Engineering EPC blockers solve a big problem with the 2011-19 Allison 1000 transmission ... low mainline pressure. Mainline pressure is created by the transmission's oil pump, directed by the valve body to the applied pistons, and creates clamping force on the clutch packs, allowing them to clamp quickly and completely. Reduced or not having enough mainline pressure at the right time means reduced clamping force—not enough to hold the torque of the engine, and when clutch packs slip, they generate excessive heat, destroying the clutch pack material. The stock EPC functions to modulate line pressure. During a shift, the transmission control module commands the EPC to vary mainline pressure. The pressure will rise from 80 up to 230 psi, then after the shift, the pressure drops back down to 80 psi, and at 80 psi the clutch packs don't hold the torque of the engine. Towing heavy loads or adding aftermarket upgrades adds even more stress on the clutch packs. PPE's EPC blocker kits quickly install between the EPC solenoid and the valve body. There is no need to remove the valve body, just drain the transmission fluid, remove the oil pan, and install the EPC blocker. Once installed, the EPC blocker will allow all the available mainline pressure, up to 230 psi, to always reach the applied pistons and clutch packs. An easy alternative to transmission line pressure tuning, you can improve shift quality and increase the ability to hold more horsepower with Pacific Performance Engineering EPC blockers.
Not Yet Reviewed
$49.49
Pacific Performance Engineering lift pump fuel line install kits make installation of your PPE fuel lift pump a snap. These kits provide pre-cut hoses, brass fittings, and clamps that you'll need to easily complete installation. Don't get sidetracked searching for correct parts to finish the job; simply order the kit recommended for your vehicle application.
Not Yet Reviewed
$35.99
Increase air flow with Pacific Performance Engineering boost increase valves. These aluminum pieces are anodized for lasting good looks, while they increase your stock turbo boost pressure--improving engine efficiency and reducing those dreaded EGTs. Pacific Performance Engineering boost increase valves can magnify your rig's power--more air equals more power!
( 8 )
$23.39
Pacific Performance Engineering race fuel valves are made from stainless steel and replace stock or a shimmed pressure relief valve. This valve helps maintain fuel rail pressure during high engine load conditions. The PPE valves eliminate potential low fuel rail pressure DTC codes P1093 or P0087 (low fuel rail pressure during power enrichment) that are caused by insufficient pressure relief valve spring pressure. Order the model recommended for your application.
( 1 )
$41.39
Pacific Performance Engineering performance hoses are designed to handle the rigors of racing, pulling competitions, and long-distance towing. These silicone hoses offer the strength of five plies of polyester-reinforced fibers, making them extremely tough; plus, their fluorocarbon lining offers higher flow and better lubricity. Their silicone rubber construction ensures the delivery of constant boost pressures from -76 degrees F to 437 degrees F, and they're chemical, oil, fuel, UV, and ozone-resistant. Available in several sizes to fit your application, they handle the stresses of drag racing and sled pulling, you need hoses that won't blow out like stock. Make your choice performance silicone hoses from Pacific Performance Engineering--the diesel performance people you can count on!
( 1 )
$53.99
Pacific Performance Engineering crankcase breathers replace your stock plastic fittings with solid race performance. These PPE breathers allow you to route the breather hose (not included) from the turbo intake to a catch-can along the side/bottom of your engine. They're precision-crafted from billet aluminum and will aid in eliminating engine oil contamination of your intake system--while helping increase flow capacity to reduce internal engine pressures. Toss the plastic and install Pacific Performance Engineering crankcase breathers for top-quality racing performance.
Not Yet Reviewed
$26.99
Pacific Performance Engineering filter spacer blocks make a difference with their Viton® O-rings. They properly place the filter/pickup further down into the fluid on deep transmission pans. The blocks are fitted with Viton® O-rings to create a seal that's leak-free and won't suck air or starve for fluid. Don't risk transmission failure. If you have a heavy-duty deep transmission pan, you really need to use Pacific Performance Engineering filter spacer blocks for the proper positive seal.
Not Yet Reviewed
$44.99
Easily drain your cooling system with Pacific Performance Engineering coolant drain tubes. Available in two sizes, these quick installs can be done right in your driveway and add a service option to any vehicle that doesn't come with a factory coolant drain. Once installed, you simply unscrew the NPT plug and your coolant runs out. Reinstall the plug, fill with fresh fluid and you're done! PPE coolant drain tubes include clamps, and both are manufactured from 304 stainless steel which provides high-strength, as well as rust and corrosion resistance. They feature a built-in 1/4 in. NPT bung for quick maintenance, and the tube ends have a smooth, consistent bead that provides a superior seal to help prevent leaks. Select the size needed for your cooling system.
Not Yet Reviewed
$26.99
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
