Availability
Pacific Performance Engineering diesel fuel lift pumps are a key component in a reliable fuel system. Rather than depending on the OEM CP3 to pull fuel from the tank, the PPE diesel fuel lift pumps push fuel through the lines and filter to eliminate the possibility of air being drawn into the system, collapsed hoses and fuel restrictions from occurring. These fuel lift pump kits include pump, mounting bracket, dual 12 V fuel pump relays and a wiring diagram.
( 10 )
$179.99
Long live your transmission! Heat is the enemy--but with PPE performance transmission coolers on the frontlines, high temperatures don't stand a chance of breaching their prey. Pacific Performance Engineering aluminum coolers feature 60 percent more surface area to lower your rig's fluid temperatures up to 30 degrees over stock. Plus, they're bolt-on replacements and they retain the use of your existing factory oil lines, so installation is pretty straightforward.
( 25 )
$197.99
Diesel engines produce a lot of heat, especially in high-output situations like towing, racing, and light-to-light driving. Upgrade your tattered, dirty firewall insulation with PPE Insulator Firewalls. Pacific Performance Engineering firewall insulators create a barrier between you and the engine, reducing heat and noise entering the cab. Each firewall insulator features a ceramic fiber interior sandwiched between a tightly woven silicone fiberglass outer fabric and a woven silica inner panel finished with merrowed stainless steel wire edging and grommets for long-lasting performance and an OEM fit. They can be installed without removing the engine and provide temperature resistance up to 1,290 degrees.
Not Yet Reviewed
$269.99
Pacific Performance Engineering Stage3 tie rod assemblies are a better option. They bolt on with no additional modifications. When it comes to steering components, failure is not an option. Featuring 1 1/2 in. wide forged tie rods, massive 2 1/3 in. ball joints, and much larger and stronger inner ball joints, Stage3 assemblies are the best of the best. They're available for fitment on dozens of applications from 2001 and up. Compared to factory components, they offer: * 30 percent larger toe adjusting shafts * 53 percent larger tie rod bodies * 35 percent larger outer ball joints * 28 percent larger inner ball joints
( 18 )
$251.99
Pacific Performance Engineering replacement high-flow up-pipes allow as much as 53 percent more flow than stock pipes, and they're a direct bolt-on to your factory manifolds. Diesel engines, even stock, produce high temperatures and pressures. OEM up-pipes eventually fail from constant temperature and pressure fluctuation. Unlike factory parts, these OE replacement high-flow up-pipes are manufactured from 11-gauge 304 stainless steel. They include internally-sleeved bellows that can take the abuse of high temperature and high pressure. Order the model recommended for your application.
( 2 )
$224.99
—
$269.99
Better than stock, Pacific Performance Engineering exhaust downpipes increase flow and performance on your Duramax. PPE crafts them with smooth bends from long-lasting 304 stainless steel. They include titanium exhaust wrap and clamps for a secure installation. Remove your crushed oval-shaped stock downpipe and replace it with a Pacific Performance exhaust downpipe for unrestricted power! Order the model recommended for your application.
( 26 )
$134.99
—
$170.99
Pacific Performance Engineering tie rod assemblies are overkill for some, but when it comes to steering components, failure is not an option. PPE tie rod assemblies provide incomparable strength and durability for your truck steering system. Featuring a 32 percent larger-diameter forged sleeve, 27 percent larger-diameter toe adjusting shaft, and 14 percent larger, stronger ball studs. The outer tie rod end features a spring-loaded ball-stud seat that maintains constant pressure and OEM steering knuckle taper. The inner tie rod end is adjustable through the end cap and contains a powdered metal ball seat, as well as a rubber shim for clearance compensation. Choose the PPE tie rods designed for your vehicle. Features: * Extreme duty forged steel outer tie rod body * Larger ball studs with lubrication grooves * Durable powdered metal inner bearing * Dual grease fittings, fully serviceable inner and outer joints * Weather- and abrasion-resistant TPV steering rack boot * Significant reduction in differential fluid temps * Limited lifetime warranty
Not Yet Reviewed
$215.99
Cracked transmission tailshaft housings are a common problem for GM Allison-equipped 4x4 pickups in off-road and drag racing situations. Pacific Performance Engineering transfer case braces are designed to remedy that problem. Even a normal amount of driveline vibration can cause the housing to fail, resulting in a transmission fluid leak or worse—internal transmission and transfer case damage. These braces help support the overhanging, heavy transfer case by spreading the load up and across the adaptor housing to the center section of the transmission. Pacific Performance transfer case braces utilize two 304 stainless steel 7/8 in. support tubes tied together with a thick 304 stainless steel plate for increased strength and service life. Order the model recommended for your vehicle and transmission application.
( 5 )
$134.99
Pacific Performance Engineering aluminum oil pans offer solutions for your stock engine pan problems. PPE pans are made from high-quality cast aluminum—not steel—for strength and optimum heat dissipation. They're engineered with flat bottoms (no valleys), allowing you to drain all of your engine oil, so no dirty oil is left behind. Also, PPE oil pans hold an extra quart of oil, so you'll see reduced oil temperature, higher oil pressure, and better lubrication to your engine's vital components. These higher capacity deep oil pans are equipped with unshrouded oil pick-ups providing less restriction, resulting in higher oil pressure and better lubrication. The pans include hardened billet stainless steel PPE drain plugs with powerful neodymium magnets that attract and hold ferrous metals, keeping them from damaging your engine's vital internal components. Your stock engine oil pan leaves a lot to be desired. Upgrade to a Pacific Performance Engineering aluminum oil pan.
( 13 )
$260.99
—
$278.99
Pacific Performance Engineering air-to-water intercoolers offer significantly lower pressure drop over traditional intercoolers. A compact design with a large internal core for increased heat transfer and reduced restriction, these PPE intercoolers achieve increased airflow, making the design ideal for use with high-cfm turbos and superchargers, and perfect for sled pulling, drag racing, and marine. Available with a 3 in. or 3.5 in. air inlet/outlet ducts, choose the best fit for your vehicle. Additional features: * Aluminum construction * Welded 1/2 in. NPT water inlet/outlet * Saves space in your build and increases output efficiency
Not Yet Reviewed
$269.99
Pacific Performance Engineering differential covers offer cool benefits! They add strength with cast high-grade aluminum alloy, style with their finned design and PPE logo in a choice of finishes. You'll realize better fluid cooling with internal and external fins. They also supply increased fluid capacity to cool and lubricate your bearings. And, with more fluid to keep clean, these covers are fitted with neodymium magnet-equipped fill and drain plugs that attract and hold harmful ferrous metals. So, add a cool fit, function, and looks--front and rear--with Pacific Performance Engineering differential covers.
( 6 )
$119.69
—
$233.99
Pacific Performance Engineering overhead gauge mounts enable you to position additional instrumentation in the storage area above your windshield. The aluminum pods will hold two 2 1/16 in. gauges, and they're available in a polished, brushed, or black finish. Models are also available with two auxiliary switches. Monitor all of your key engine functions with an overhead assist from Pacific!
( 2 )
$112.49
—
$152.99
Pacific Performance Engineering heavy-duty transmission pans do more than hold oil--they cool and protect! They have thick cast construction from high-grade aluminum alloy. Thanks to internal and/or external cooling fins and robust side ribs, PPE transmission pans are much stronger and they allow fluid to run much cooler. Lastly, they feature an insanely strong Neodymium magnet-equipped stainless steel drain plug that attracts and holds harmful metal particles floating in your oil. Really, your pan just holds the oil? It's time for a change--upgrade to cooler Pacific Performance Engineering heavy-duty transmission pans.
( 31 )
$242.99
—
$260.99
Pacific Performance Engineering V-band clamps facilitate a leak-free seal. Exhaust leaks rob your vehicle of power—and the noise can be embarrassing. These clamps are made from heavy-duty 304 stainless steel and feature steel bolts and Nyloc nuts for added durability. They're available in sizes for a variety of pipe diameters. Order the clamps individually or in a set.
( 6 )
$134.99
Pacific Performance Engineering performance hoses are designed to handle the rigors of racing, pulling competitions, and long-distance towing. These silicone hoses offer the strength of five plies of polyester-reinforced fibers, making them extremely tough; plus, their fluorocarbon lining offers higher flow and better lubricity. Their silicone rubber construction ensures the delivery of constant boost pressures from -76 degrees F to 437 degrees F, and they're chemical, oil, fuel, UV, and ozone-resistant. Available in several sizes to fit your application, they handle the stresses of drag racing and sled pulling, you need hoses that won't blow out like stock. Make your choice performance silicone hoses from Pacific Performance Engineering--the diesel performance people you can count on!
( 1 )
$107.99
—
$251.99
Performance analog gauges from Pacific Performance Engineering will help extend the life of your drivetrain when used correctly. For instance, are your turbo boost pressure measurements up to par? What about the exhaust gas temperature parameters? Industry-standard 2 1/16 in. diameter PPE gauges offer the answers, most with easy-to-read white lettering/numbers and a red needle on a black face. With stylish black bezels that accent many of the full-sweep designs and dimmable white LED illumination, Pacific Performance Engineering Performance analog gauges head-off potential problems, keeping your vehicle out of the "danger zone."
Not Yet Reviewed
$125.99
Pacific Performance Engineering V-band exhaust flanges make custom systems easier to build. These interlocking flanges are made from mild steel and come in "engine" or "exhaust" side configurations so there is no confusing the two. They easily weld to your exhaust tube and can be securely connected with PPE steel V-band clamps. Pacific Performance Engineering V-band exhaust flanges are available in several sizes to meet your needs.
Not Yet Reviewed
$125.99
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
