Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
Availability
Pacific Performance Engineering Diesel Fuel Lift Pumps
Pacific Performance Engineering diesel fuel lift pumps are a key component in a reliable fuel system. Rather than depending on the OEM CP3 to pull fuel from the tank, the PPE diesel fuel lift pumps push fuel through the lines and filter to eliminate the possibility of air being drawn into the system, collapsed hoses and fuel restrictions from occurring. These fuel lift pump kits include pump, mounting bracket, dual 12 V fuel pump relays and a wiring diagram.
( 10 )
$179.99
Pacific Performance Engineering LB7 Cast Iron Cylinder Heads
OEM Duramax cast aluminum cylinder heads fall short over time; the different heat expansion crates between cast iron engine block and cast aluminum cylinder head cause head gasket scrubbing, and eventually blown head gaskets. Aluminum cylinder heads are also prone to warping, melting, and/or cracking in high performance applications where excessive heat is introduced. Pacific Performance Engineering LB7 cast iron cylinder heads are the ultimate upgrade to your Duramax engine and eliminate any head gasket or cracking concerns. Cast from high-quality alloyed grey iron, PPE LB7 cylinder heads offer elevated fatigue strength and heat and creep resistance, which prolongs the cylinder head's lifespan significantly. They also share the same heat expansion rate as the stock cast iron cylinder block, so no more blown head gaskets. These cylinder heads also feature cast-in fuel injector cups and solve the OEM injector cup leaking issue. Each head comes complete with brand new springs, spring retainers, spring locators, valves, valve seals, valve keepers, valve seats, valve guides, rocker arm dowels, and freeze plugs. Whether you have a damaged aluminum cylinder head or a desire for better reliability and longevity on your Duramax engine, the Pacific Performance Engineering LB7 cast iron cylinder head is undoubtedly the best choice. Component features and benefits: * Premium 21-4N, Stellite-reinforced exhaust valves, and chrome-silicon alloy intake valves * All valves are fully nitridated with increased abrasion resistance * High-strength, CNC-machined chromoly steel spring retainers and spring locators * Upgraded tapered valve springs provide faster response and eliminate valve float at high rpms * Powdered metal valve seats offer superior wear and heat resistance * Significantly reduced diesel engine clatter compared to the factory aluminum cylinder heads * Increased thermal efficiency compared to aluminum heads * 3-Year Unlimited Mileage Warranty
Not Yet Reviewed
$1,349.99
Pacific Performance Engineering Replacement High-Flow Up Pipes
Pacific Performance Engineering replacement high-flow up-pipes allow as much as 53 percent more flow than stock pipes, and they're a direct bolt-on to your factory manifolds. Diesel engines, even stock, produce high temperatures and pressures. OEM up-pipes eventually fail from constant temperature and pressure fluctuation. Unlike factory parts, these OE replacement high-flow up-pipes are manufactured from 11-gauge 304 stainless steel. They include internally-sleeved bellows that can take the abuse of high temperature and high pressure. Order the model recommended for your application.
( 2 )
$134.99
—
$449.99
Pacific Performance Engineering MicroPure Extreme-Performance Oil Filters
Pacific Performance Engineering MicroPure Extreme-Performance engine oil filters offer 2.5 times the filtration area of a conventional oil filter, providing the performance your engine oil needs to stay cleaner and for longer periods. Specially engineered synthetic filtration media achieves superior filtration to trap particles down to 5 microns, while a high-powered magnet secured at the bottom of the filter catches metal debris, preventing it from clogging the filter media and prolongs oil life. MicroPure's bypass valve is 10 psi stiffer than the OEM bypass valve and reduces the chance of dirty oil bypassing, and a heat-resistant silicone anti-drain-back valve retains the oil in the filter after the engine is turned off. With increased filtration area, four times finer media, and prolonged filter life, the PPE MicroPure Extreme-Performance filter is the ultimate choice for your engine. Additional features and notes: * 900 sq. in. of premium composite filtration media, a 150 percent increase over stock * Perforated metal core and spiral-wrapped adhesive secures filter media * 3/16 in.-16 UNF threaded baseplate with 47 percent larger passages * Direct replacement for the stock oil filter * High-power internal Neodymium magnet * 50 percent thicker base plate * Withstand 450 psi maximum burst pressure * TorqueStop feature to ensure a tight seal * Reinforced silicone anti-drain-back valve ensures a unidirectional flow
( 1 )
$35.99
Pacific Performance Engineering Performance Transmission Coolers
Long live your transmission! Heat is the enemy--but with PPE performance transmission coolers on the frontlines, high temperatures don't stand a chance of breaching their prey. Pacific Performance Engineering aluminum coolers feature 60 percent more surface area to lower your rig's fluid temperatures up to 30 degrees over stock. Plus, they're bolt-on replacements and they retain the use of your existing factory oil lines, so installation is pretty straightforward.
( 30 )
$197.99
—
$350.99
Pacific Performance Engineering Exhaust Downpipes
Better than stock, Pacific Performance Engineering exhaust downpipes increase flow and performance on your Duramax. PPE crafts them with smooth bends from long-lasting 304 stainless steel. They include titanium exhaust wrap and clamps for a secure installation. Remove your crushed oval-shaped stock downpipe and replace it with a Pacific Performance exhaust downpipe for unrestricted power! Order the model recommended for your application.
( 26 )
$134.99
—
$170.99
Pacific Performance Engineering Heat/Sound Firewall Insulators
Diesel engines produce a lot of heat, especially in high-output situations like towing, racing, and light-to-light driving. Upgrade your tattered, dirty firewall insulation with PPE Insulator Firewalls. Pacific Performance Engineering firewall insulators create a barrier between you and the engine, reducing heat and noise entering the cab. Each firewall insulator features a ceramic fiber interior sandwiched between a tightly woven silicone fiberglass outer fabric and a woven silica inner panel finished with merrowed stainless steel wire edging and grommets for long-lasting performance and an OEM fit. They can be installed without removing the engine and provide temperature resistance up to 1,290 degrees.
Not Yet Reviewed
$269.99
Pacific Performance Engineering Stage3 Tie Rod Assemblies
Pacific Performance Engineering Stage3 tie rod assemblies are a better option. They bolt on with no additional modifications. When it comes to steering components, failure is not an option. Featuring 1 1/2 in. wide forged tie rods, massive 2 1/3 in. ball joints, and much larger and stronger inner ball joints, Stage3 assemblies are the best of the best. They're available for fitment on dozens of applications from 2001 and up. Compared to factory components, they offer: * 30 percent larger toe adjusting shafts * 53 percent larger tie rod bodies * 35 percent larger outer ball joints * 28 percent larger inner ball joints
( 18 )
$251.99
Pacific Performance Engineering Heavy-Duty Transmission Pans
Pacific Performance Engineering heavy-duty transmission pans do more than hold oil--they cool and protect! They have thick cast construction from high-grade aluminum alloy. Thanks to internal and/or external cooling fins and robust side ribs, PPE transmission pans are much stronger and they allow fluid to run much cooler. Lastly, they feature an insanely strong Neodymium magnet-equipped stainless steel drain plug that attracts and holds harmful metal particles floating in your oil. Really, your pan just holds the oil? It's time for a change--upgrade to cooler Pacific Performance Engineering heavy-duty transmission pans.
( 39 )
$277.19
—
$350.99
Pacific Performance Engineering Premium High-Efficiency Spin-On Transmission Fluid Filters
Pacific Performance Engineering recognized the need for better filtration for the hard-working Allison 1000 and 2000 transmissions, so they developed the Premium high-efficiency spin-on transmission fluid filters. These superior filters are designed to address the limitations of the standard "shorty filter". Inside the PPE double-deep spin-on filter is 2.72 times more filter media surface area. This increased surface area allows improved fluid flow and filtering. The double-deep filter traps particles down to 15 microns—that is half the size of what the standard spin-on filter catches, which helps to create a cleaner flow of oil to vital internal components, resulting in smooth, more responsive shifts. Do more to protect your Allison transmission and realize better performance. Don't come up short. Spin-on PPE's high-efficiency transmission fluid filters!
( 3 )
$17.99
Pacific Performance Engineering Exhaust Manifolds
Replacing your stock exhaust manifold and up-pipes should be the first step in building a high performance exhaust system. Pacific Performance Engineering exhaust manifolds are co-designed by Honeywell (Garrett) and PPE, using CAD software to maximize flow characteristics. The included up-pipe bellows are high-flow, internally sleeved, and manufactured from 11-gauge, 0.120 in. wall aircraft-grade stainless steel with a 2 in. O.D. The exhaust manifolds are machined from high-silicon moly cast iron; feature built-in bosses; and are pre-drilled and tapped for a 1/8 in. NPT EGT sensor. PPE exhaust manifolds will help lower exhaust gas temperatures, reduce drive pressure, and accelerate turbo spool-up while maintaining reliability. Order the model recommended for your application.
( 2 )
$899.99
—
$1,520.99
Pacific Performance Engineering Economy Xcelerator Tuners
Get the most out of your diesel using Pacific Performance Engineering economy Xcelerator tuners. They were designed for those diesel-minded owners who are looking for a mild horsepower and torque increase. The tuners offer three horsepower settings (40, 90, and 120). Torque values are raised up to 200 ft.-lbs. over stock. These tuners provide the user with the ability to adjust items such as speedometer corrections, transmission tuning with online updating, and DTC code clearing. They are perfect for those individuals with stock engines who are looking to get that little something extra out of their truck when they need it the most. Features include: * 3 power levels of additional horsepower and torque * Speedometer corrections (for tire sizes 25 through 44.75 in. at 1/4 in. increments) * Speed limiter adjustable (40 to 96 mph in 1 mph increments or directly to 200 mph) * Gear ratio adjustable from 2.73 to 5.13 * Read and clear DTCs * Engine diagnostics data read in real time * Transmission reset and quick learn feature * Online updates available * DPF regeneration (LMM engine)
Not Yet Reviewed
$359.99
Pacific Performance Engineering Aluminum Oil Pans
Pacific Performance Engineering aluminum oil pans offer solutions for your stock engine pan problems. PPE pans are made from high-quality cast aluminum—not steel—for strength and optimum heat dissipation. They're engineered with flat bottoms (no valleys), allowing you to drain all of your engine oil, so no dirty oil is left behind. Also, PPE oil pans hold an extra quart of oil, so you'll see reduced oil temperature, higher oil pressure, and better lubrication to your engine's vital components. These higher capacity deep oil pans are equipped with unshrouded oil pick-ups providing less restriction, resulting in higher oil pressure and better lubrication. The pans include hardened billet stainless steel PPE drain plugs with powerful neodymium magnets that attract and hold ferrous metals, keeping them from damaging your engine's vital internal components. Your stock engine oil pan leaves a lot to be desired. Upgrade to a Pacific Performance Engineering aluminum oil pan.
( 13 )
$260.99
—
$377.99
Pacific Performance Engineering Race Fuel Pressure Relief Valves
Pacific Performance Engineering race fuel pressure relief valves are designed to replace the stock original. Machined from heat-treated stainless steel, these fittings help maintain fuel rail pressure during heavy engine load conditions. The PPE valves eliminate the potential low pressure DTC codes P1093 or P0087 (during power enrichment) caused by insufficient pressure relief valve spring pressure. Order the model recommended for your application.
( 11 )
$22.49
—
$41.39
Pacific Performance Engineering Stainless Steel Heater Hose Connectors
The plastic HVAC heater hose connectors are a common failure point when the older part fatigues from heat and vibration. Pacific Performance Engineering stainless steel heater hose connectors provide excellent durability, a reliable seal, and corrosion resistance for the life of your vehicle. Several options are available, and each will provide an OE fit for easier installation. Select the one designed for your vehicle's heater hose application.
( 1 )
$19.79
Pacific Performance Engineering LLY/LBZ/LMM Cast Iron Cylinder Heads
OEM Duramax cast aluminum cylinder heads fall short over time; the different heat expansion crates between cast iron engine block and cast aluminum cylinder head cause head gasket scrubbing, and eventually blown head gaskets. Aluminum cylinder heads are also prone to warping, melting, and/or cracking in high performance applications where excessive heat is introduced. Pacific Performance Engineering LLY/LBZ/LMM cast iron cylinder heads are the ultimate upgrade to your Duramax engine and eliminate any head gasket or cracking concerns. Cast from high-quality alloyed grey iron, PPE LLY/LBZ/LMM cylinder heads offer elevated fatigue strength and heat and creep resistance, which prolongs the cylinder head's lifespan significantly. They also share the same heat expansion rate as the stock cast iron cylinder block, so no more blown head gaskets. These cylinder heads also feature cast-in fuel injector cups and solve the OEM injector cup leaking issue. Each head comes complete with brand new springs, spring retainers, spring locators, valves, valve seals, valve keepers, valve seats, valve guides, rocker arm dowels, and freeze plugs. Whether you have a damaged aluminum cylinder head or a desire for better reliability and longevity on your Duramax engine, the Pacific Performance Engineering LLY/LBZ/LMM cast iron cylinder head is undoubtedly the best choice. Component features and benefits: * Premium 21-4N, Stellite-reinforced exhaust valves, and chrome-silicon alloy intake valves * All valves are fully nitridated with increased abrasion resistance * High-strength, CNC-machined chromoly steel spring retainers and spring locators * Upgraded tapered valve springs provide faster response and eliminate valve float at high rpms * Powdered metal valve seats offer superior wear and heat resistance * Significantly reduced diesel engine clatter compared to the factory aluminum cylinder heads * Increased thermal efficiency compared to aluminum heads * 3-Year Unlimited Mileage Warranty
Not Yet Reviewed
$1,349.99
Pacific Performance Engineering High-Flow Intake Bridge Manifolds
Pacific Performance Engineering offers high-flow intake bridge manifolds for a wide range of vehicles, including many Chevrolet and GMC trucks from the early 2000s and up. They are perfect for custom, hot rod, or marine applications. High-performance engines require sufficient airflow, as well as fuel, to be optimally efficient. PPE's high-flow intake manifolds eliminate the restrictive air intake heater and quickly channel every precious pound of turbo boost into the engine. The result is more horsepower and lower EGTs. Features: * Full 3 in. intake ported bridge * 3 in. robust cast aluminum end resists distortion from hose clamp
Not Yet Reviewed
$269.99
Pacific Performance Engineering Up-Pipes Bolt Sets
Secure your pipes with Pacific Performance Engineering up-pipes bolt sets. Each set includes Class 12.9 alloy steel 12-point screws with a black oxide finish--engineered to be better. PPE's OEM design features an increased thread length to accommodate washer thickness (washers are included), two screws that are 5mm longer to accommodate the downpipe mounting bracket, and this PPE design preserves thread engagement whereas others do not. Contents: * (10) M10 x 1.5 x 32 bolt and washer * (12) M10 washers * (2) M10 x 1.5 x 37 bolt and washer
( 1 )
$31.49
—
$35.99
Pacific Performance Engineering Billet Aluminum Coolant Block-Off Plates
While the OEM coolant block-off plates use a gasket and can leak over time, PPE's billet block-off plates are thicker and use Viton® O-ring seals for maximum longevity. They are CNC-machined from billet aluminum with a leak-free design, and install using the OEM fasteners. Pacific Performance Engineering coolant block-off plates are available with a black or raw finish etched with the PPE logo. Select the one preferred for your diesel.
Not Yet Reviewed
$53.99
Pacific Performance Engineering Oil Pan Drain Plugs
Performance Engineering oil pan drain plugs are crafted from stainless steel and equipped with a strong Neodymium magnet. The magnet pull harmful ferrous metal contaminants from the oil, helping to extend the life of your engine or transmission. PPE oil drain plugs will include copper gasket or O-ring.
( 1 )
$17.99
Pacific Performance Engineering Transfer Case Braces
Cracked transmission tailshaft housings are a common problem for GM Allison-equipped 4x4 pickups in off-road and drag racing situations. Pacific Performance Engineering transfer case braces are designed to remedy that problem. Even a normal amount of driveline vibration can cause the housing to fail, resulting in a transmission fluid leak or worse—internal transmission and transfer case damage. These braces help support the overhanging, heavy transfer case by spreading the load up and across the adaptor housing to the center section of the transmission. Pacific Performance transfer case braces utilize two 304 stainless steel 7/8 in. support tubes tied together with a thick 304 stainless steel plate for increased strength and service life. Order the model recommended for your vehicle and transmission application.
( 5 )
$134.99
Pacific Performance Engineering CNC-Ported LLY/LBZ/LMM Cast Iron Cylinder Heads
PPE's CNC-ported LLY/LBZ/LMM cast iron cylinder heads are the ultimate upgrade to your Duramax engine to eliminate any head gasket or cracking concerns. Cast from high-quality alloyed gray iron, the PPE cylinder heads offer elevated fatigue strength, heat, and creep resistance, which prolongs the cylinder head's lifespan significantly. The cylinder heads also share the same heat expansion rate as the stock cast-iron cylinder block—no more blown head gaskets! PPE's CNC-porting process improves airflow, enhancing power, fuel efficiency, and throttle response while reducing engine stress and turbo lag. By smoothing the ports and maintaining wall thickness, these heads provide increased horsepower and torque without sacrificing reliability. Tailored to each specific head, the CNC machining compensates for casting variations, ensuring consistent and optimized airflow dynamics. Whether you have a damaged aluminum cylinder head or a desire for better reliability and longevity on your Duramax engine, cast iron cylinder heads from Pacific Performance Engineering are undoubtedly the best choice. Product features: * Specially alloyed gray cast iron liquid-cooled cylinder head * 5-Axis CNC-ported intake and exhaust ports for smooth, unrestricted airflow * Increased thermal efficiency compared to aluminum heads * Reduced noise and vibration, better ride * Eliminates head gasket scrubbing issue (blown head gasket) * Higher fatigue strength and heat resistance * Premium 21-4N, Stellite-reinforced exhaust valves * Fully nitridated valves, better abrasion resistance * Ready to install—comes with all valvetrain components, rocker arm dowels, and freeze plugs * Requires the use of LBZ/LMM glow plugs on LLY engines (sold separately) Important Notes: The valve seats of the PPE heavy cast iron cylinder heads are installed with an interference that maximizes the durability and lifespan of the cylinder heads. Such interference might not be optimal for extreme-performance applications where a significant amount of heat is created. For those applications, PPE suggests that the exhaust valve seats be replaced with higher interference (+0.006 in. to +0.008 in.) oversized exhaust valve seats (Nominal size 34mm).
Not Yet Reviewed
$1,709.99
Pacific Performance Engineering Transmission Fluid Bypass Valves
Pacific Performance Engineering offers automatic transmission fluid bypass valves for a variety of applications. The OEM part has restrictive internal passages; and when the OEM valve fails in the open position, transmission fluid doesn't reach your cooler. This can be caused by mechanical failure or debris. The result of stock valve failure can cause the transmission to dangerously overheat. Without properly cooled transmission fluid, the demands of towing and rigorous stop-and-go driving conditions shorten the life of transmission components. This PPE bypass valve eliminates the mechanical valve—which maximizes fluid flow from the transmission cooler. For further protection, a Neodymium magnet-equipped service plug has been added. The removable plug traps ferrous debris and can be accessed to remove particles from the system. The factory part does not have this feature. Additional notes: * Billet aluminum construction * Neodymium magnet-equipped service plug with O-ring * Easy to install * Limited lifetime warranty
( 19 )
$89.99
Pacific Performance Engineering Crankcase Breathers
Pacific Performance Engineering crankcase breathers replace your stock plastic fittings with solid race performance. These PPE breathers allow you to route the breather hose (not included) from the turbo intake to a catch-can along the side/bottom of your engine. They're precision-crafted from billet aluminum and will aid in eliminating engine oil contamination of your intake system--while helping increase flow capacity to reduce internal engine pressures. Toss the plastic and install Pacific Performance Engineering crankcase breathers for top-quality racing performance.
Not Yet Reviewed
$26.99
