Availability
These Power Probe III testers with accessory kit have multiple features and can be used to test short circuits, relay and components, continuity, and bad grounds. They have an easy-to-read backlit voltmeter, which allows you to read voltage at the tip, eliminating wasted time running to your toolbox for a voltmeter. The testers use gold plated, rugged connectors that guarantee a secure hookup every time. When you connect the Power Probe III testers with accessory kit to your vehicle's battery, you have a multitude of testers at your fingertips. Press the rocker switch forward, and you'll have a hot lead for powering up electrical components like cooling fans and relays. Press the switch rearward, and you will have an instant ground lead. You can simultaneously use the hot lead and ground lead to activate components right in your hand. The polarity testers instantly identify positive, negative, and open circuits without having to re-polarize or reconnect hookup clips, like ordinary test lights.
( 31 )
$189.51
Power Probe III and lead set combos offer simplicity, with many adapters and connectors, making them truly the ultimate circuit testers! These combos have all of the benefits of the Power Probe I and II, plus a voltmeter and a built-in banana jack for lead set accessories for unparalleled diagnostic power. Clear your tool bench for the only diagnostic tools you'll use--Power Probe III and lead set combos. Power Probe III and lead set combos include: * Cigarette lighter adapter * 3 in. probe tip * Battery hook-up clips * 20 ft. extension lead * 2 piercing probes * Alligator clip adapter * 6 ft., 3 ft., and 1 ft. cables * Male and female adapters
( 28 )
$189.51
—
$267.71
Power Probe PP3CS digital voltmeters provide you with a voltmeter and continuity tester with audible and visual indicators, plus two LED headlights to light up your work area. The PP3 units use a 20 ft. cable which attaches to the vehicle's battery, allowing you to perform an electrical test anywhere in or around the vehicle. The circuit tester uses the vehicle's battery to supply 12 V to 24 V of circuit breaker protected power or ground to activate components, and the probe tip can be removed to adapt to any 4mm lead. Using an auxiliary ground cable, the user can simultaneously supply battery voltage and ground to test components or to simply test for continuity. Power Probe PP3CS digital voltmeter circuit testers are valuable time-savers, perfect for every level technician. Key features, specs, and benefits: * Voltage and polarity testing * Continuity testing * Activating components out of the vehicle's electrical system, as well as in the vehicle * Activating electrical components with ground * Great for testing trailer lights and connections * Checking for bad ground contacts for troubleshooting issues * Red/Green indicator and audio tone * Frequency response of tone pass through 10 HZ to greater than 10 kHz * PP display: 15 Hz and 35 Hz Sine Wave Power Probe Mode–continuity to ground: * First level: display is enabled less than 20k megaohms * Second level: Green LED is enabled less than 600 megaohms and +Peak detector response * Single event capture less than 200ms pulse width * Repetitive events less than 1ms pulse width Peak-to-Peak mode: * 0 to +70 + 1 digit * Hz to over 500 kHz square wave input * 4 Hz to over 250 kHz sine wave input * The threshold for PPAC/Audible passthrough * Circuit breaker 8 amp thermal response–manual reset
( 2 )
$145.31
Power Probe 4 Master combo kits combine the Power Probe 4, PPECT3000 and various accessories to provide the ultimate combination of diagnostic and circuit-testing capabilities. These kits offer simplified testing of motors, lights, relays, sensors—even fuel injectors! And, like all Power Probe circuit-testers, these 4 Master combo kits supply power and ground for efficient, functional component-testing on or off the vehicle. Features, specs and benefits: * Self-resetting thermal 8 amp circuit breaker * Multiple DC V readings on the same display * Ohm meter provides active feedback * 12 V to 24 V range * Bad ground indicator * Continuity and component tester * AC-RMS, AC Peak-to-Peak, frequency and pulse width indicators are available for signal testing * Fuel injector tester for easy circuit diagnosis * PCM/ECM Driver supplies safe voltage for testing computer driver circuits * PPECT mode for signal detection of open circuits * Active LED lighting for illuminating workspace * Power cable length of 23 ft. * Storage case included
( 1 )
$498.91
You'll wonder how you ever did electrical troubleshooting before! Power Probe IV testers will greatly increase how fast you can set up and diagnose a problem. They feature a large color LCD screen with an easy-to-navigate user menu, and the PCM/ECM driver supplies safe voltage for testing computer driver circuits. Enjoy the advantage of having an ohm meter, circuit, AC voltage, and frequency tester, all in one tool. The Power Probe 4 testers will be the first thing you grab for electrical issues, and they are must-haves for any mechanic.
( 4 )
$302.56
These Power Probe master combo kits allow you to perform every type of service, including power injection, measurement, ground testing, polarity checks, and continuity testing. They include the Power Probe III, ECT2000, LS01, new improved adapters, and an easy-to-read back lit voltmeter.
( 3 )
$418.16
Power Probe piercing probe kits feature automotive diagnostic test tools. The small and large flexible piercing probes are able to test wires in hard-to-reach places—and can handle 8-28 AWG. Additional notes: * Color-coded for easy recognition * Self-centering * 4mm banana plugs
( 2 )
$28.01
Power Probe offers a variety of electrical test leads, accessories, and replacement parts—including these test probe adapter kits. They include one back probe and one blade probe.
( 1 )
$15.26
—
$19.51
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
