PerTronix Ignition Components Ignitions & Electrical

PerTronix Flame-Thrower Tuneup Kits

PerTronix Flame-Thrower tuneup kits not only make your tired stock HEI distributor young again, they make it better than it was before. The upgrade kits include many of the same components that make up PerTronix's powerful Flame-Thrower distributor: A 50,000 V coil and module; an alkyd cap and rotor; an adjustable vacuum advance canister; a high-performance advance kit; a wiring harness; a capacitor; and hardware. Order the model recommended for your year/make and engine application.

4.06 out of 5 stars ( 50 )

$185.58

—

$222.32

PerTronix Flame-Thrower HEI III 4-Pin Ignition Modules

PerTronix Flame-Thrower HEI III 4-pin ignition modules feature multiple sparks through the entire RPM range, plus an integrated high resolution digital rev-limiter. The rev-limiter settings are displayed with a LED feedback for precise RPM settings. Adaptive dwell maintains peak energy throughout the entire RPM range, reducing misfires while improving engine performance. Peak current level is reached just prior to spark for maximum energy without the heat build-up, increasing coil performance and module reliability. The PerTronix Flame-Thrower HEI III 4-pin ignition modules adjusts spark timing at higher RPMs to compensate for the inherent electronic delay and they can sense startup and increases energy for quicker, easier starting.

4.29 out of 5 stars ( 48 )

$104.91

PerTronix Flame-Thrower HEI and TFI Ignition Coils

With their optimized winding design, PerTronix Flame-Thrower HEI and TFI ignition coils are a great upgrade from stock. They produce more than 50,000 V of energy to zap your plugs, for fuller, more complete combustion and better power. When used with their companion Flame-Thrower ignition modules, they produce more than twice the energy of a stock system at the plugs. They're wrapped in rugged alkyd housings and are available for both distributor-mounted and external applications.

4.64 out of 5 stars ( 64 )

$79.31

—

$99.36

PerTronix Flame-Thrower Street/Strip HEI Distributors

PerTronix's Flame-Thrower Street/Strip HEI distributors will produce 67 percent more energy in the coil, and deliver twice the energy across the spark gap. Plus, they deliver misfire-free performance up to a minimum of 7,500 rpm, a 3,000 rpm improvement over most original HEIs. Each distributor uses a new aluminum housing, cast and machined from a strong but lightweight A384 alloy. High-quality bronze sintered bushings are installed, aligned, and bored for accuracy and extended mileage use. Features include an adjustable vacuum advance, a high-performance mechanical curve kit, aluminum housing, a high dielectric strength cap with solid brass terminals, a balanced rotor, and a centerless-ground shaft.

4.3 out of 5 stars ( 50 )

$291.17

—

$432.63

PerTronix HEI Cap and Rotor Kits

Looking for a good cap and rotor for your HEI distributor? These Pertronix caps and rotors are made from a high-dielectric, 60 kV-rated alkyd molding compound to minimize crossfire and "arc-thru." They include nylon rotor hold-down screws, a low-resistance coil brush for a more efficient spark, and brass terminals for a long life.

3.82 out of 5 stars ( 11 )

$47.20

—

$47.77

PerTronix Flame-Thrower HEI Ignition Module Wiring Harnesses

PerTronix Flame-Thrower HEI ignition module wiring harnesses feature a premium-quality wire and capacitor to ensure good connections and static-free operation. They include pre-terminated ends that can be installed in minutes with no cutting or modification. Additional notes: * Flame-Thrower Street/Strip distributors have a specially designed HEI distributor module and coil combination which operates without misfire beyond 7,500 rpm. That's nearly 3,000 rpm higher than most stock HEI distributors. Race HEI distributors feature an electronic HEI distributor module and 50,000 V coil combination that optimizes spark energy and peak current to the spark plug in the 6,000 to 8,500 rpm range. * PerTronix 4-pin wire harness/capacitor for all Flame-Thrower HEI distributors and GM 8-cylinder HEI distributors (P/N PNX-D9007)

3.69 out of 5 stars ( 13 )

$34.78

PerTronix Flame-Thrower Street/Strip HEI Distributors with HEI III Modules

PerTronix Flame-Thrower Street/Strip HEI distributors with HEI III modules reduce misfires and improve engine performance. These powerful energy sparkers feature a specially designed module—the HEI III—that delivers multiple sparks and adaptive dwell that maintains peak energy through the entire RPM range. Flame-Thrower Street/Strip distributors have a factory-installed performance advance curve and an adjustable vacuum advance. They offer operation without misfire beyond 7,500 rpm—nearly 3,000 rpm higher than most stock HEI distributors. Order the model recommended for your application. Additional features: * Integrated digital rev limiter with LED feedback for precise RPM setting * Peak current level is reached just prior to spark for maximum energy without the heat buildup, increasing coil performance and module reliability * Adjusts spark timing at higher RPM to compensate for the inherent electronic delay * Senses startup and increases energy for quicker, easier starting

4.67 out of 5 stars ( 6 )

$379.38

—

$396.41

PerTronix Flame-Thrower HEI Distributors

Experts agree that HEI ignition performance relies on a quality module and coil. Pertronix believes the combination of a great module and a great coil makes their Flame-Thrower HEI distributors the best. They've engineered the module and coil to work together to provide you with superior ignition performance on the street or track. Compare the Flame-Thrower high performance module and coil to an original GM HEI distributor and you'll find these improvements: * Operates without misfires up to a minimum of 7,500 rpm, nearly 3,000 rpm higher than most enthusiasts report with their original HEI * Produces 67 percent more energy in the coil * Spark breakdown time (the amount of time until the spark plug has enough voltage to spark) is 45 percent faster, resulting in more accurate timing throughout the rpm range * Delivers twice the energy across the spark gap (during a one-millisecond burn time) * Spark duration and more energy to the spark allow wider plug gaps (.050 in.-.055 in.), increasing flame kernel growth These are dramatic improvements, not just because of a great module and coil, but also because they've been designed to work as a team to produce these results. Models and options are available for applications from the 1950s and up.

4.23 out of 5 stars ( 22 )

$367.99

—

$511.70

PerTronix Flame-Thrower Race HEI Distributors

Flame-Thrower Race HEI distributors from PerTronix produce 42 percent more energy in the coil, with 46 percent faster spark breakdown time. This allows 48 percent more peak current to reach the spark plug, compared to their Street/Strip HEI distributors. That's an enormous improvement over stock HEIs and most aftermarket HEI distributors. A specially designed vacuum lockout mechanism prevents timing adjustments that change rotor phasing, adversely affecting the burn time and efficient fuel combustion. The rotor plates are TIG-welded to the mechanical advance mechanism, preventing high-rpm distortion and improving mechanical reliability. Each distributor uses a new aluminum housing cast and is machined from a strong, but lightweight A384 alloy. They're supplied with a high-dielectric strength cap with solid brass terminals, a balanced rotor, and a low-resistance center coil brush. Also included are nylon rotor hold-down screws and a factory-installed, high performance mechanical curve kit with precision-machined weights and a center plate. A hardened, machined steel gear is standard, along with an electronic module and coil combination that excels in the 6,000 to 8,500 rpm range. These distributors are great for both Circle Track and drag race applications where factory-type HEI distributors are mandated.

3.78 out of 5 stars ( 9 )

$429.32

—

$544.67

PerTronix Flame-Thrower HEI Dust Covers

PerTronix Flame-Thrower HEI dust covers are made from quality materials to provide increased space and help your coil run cooler. They're designed for PerTronix Flame-Thrower distributors to help clean up the look of any HEI system.

Not Yet Reviewed

$35.35

PerTronix Flame-Thrower Stock Look Cast Distributors

Pertronix Flame-Thrower stock look cast distributors are loaded with all of the features that you would expect from a high performance part, and yet they maintain the original look, for the ultimate "sleeper." Pertronix builds each distributor with all-new components, not from remanufactured parts like some companies do. No longer will you need to hassle with adjusting points or replacing capacitors, because these distributors are equipped with maintenance-free Ignitor electronics, providing decades of trouble-free operation. Each distributor is complete with a high-quality cap and rotor, so you're ready to run right out of the box. Stock look distributor features include: * All-new lightweight cast aluminum housing, modeled after the original Delco and Motorcraft distributors * Hardened gear ground to exact tolerances for precise mesh with cam * Adjustable vacuum advance canister, providing extra tunability * Optimized phasing to ensure maximum energy to the spark plug * Tailored advance curve for optimal performance and drivability * Integrated electronic ignition--available with solid-state Ignitor or the powerful Ignitor III with built-in adjustable REV limiter and multi-spark through redline * High dielectric strength cap and rotor with brass contacts

4.23 out of 5 stars ( 261 )

$171.29

—

$246.49

PerTronix Flame-Thrower Ignition Modules

Pertronix Flame-Thrower ignition modules for GM and Ford distributors are direct replacements for the OEM modules and provide enhanced high-rpm performance. Flame-Thrower modules are available for most GM car and truck applications using both remote and in-cap coils in 4-pin, 7-pin, and 8-pin configurations. A Ford Thick Film Ignition (TFI-IV) module is also available (distributor mount only). Thick film technology on alumina ceramic substrates removes heat for greater accuracy and improved reliability, while laser trimming gives precise peak current control for increased energy output. Each module is tested twice with automated equipment to ensure trouble-free operation.

3.93 out of 5 stars ( 42 )

$72.45

—

$99.36

PerTronix Flame-Thrower Distributor Cap and Rotor Kits

Servicing your billet or cast Flame-Thrower? PerTronix distributor cap and rotor kits are available to help you perform routine maintenance and make repairs. The caps are high-dielectric strength compound to minimize crossfire and "arc-through". They are available in red or black with male or female brass terminals and premium rotors with brass contacts. Restore power with PerTronix cap and rotor kits.

4.38 out of 5 stars ( 53 )

$17.85

—

$69.71

PerTronix Flame-Thrower Ignition Coils

PerTronix Flame-Thrower upgrades your stock coil to something with more wallop! Flame-Thrower coils deliver more than 40,000 V of spark energy to your plugs for fuller, more complete combustion. They're available in a variety of primary resistance ohm versions, with either oil-filled canisters—which keep their low-resistance windings secure and cool for reliable long-term performance—or epoxy-filled canisters for extra vibration protection. Flame-Throwers are available in chrome or black (epoxy, black only). Order the style and options preferred for your application.

4.77 out of 5 stars ( 529 )

$125.53

PerTronix Distributor Caps

When it's time for a tune-up, PerTronix offers quality distributor caps to replace your worn-out original. Why take chances with old, questionable, or faulty ignition components that can leave you stranded. PerTronix distributor caps are designed to exceed OEM specifications for dependable, accurate, maintenance-free operation. Trust your vehicle's ignition system needs to PerTronix; order the model and options best suited for your vehicle.

4.33 out of 5 stars ( 36 )

$18.33

—

$58.37

PerTronix Adjustable Vacuum Advance Canisters

PerTronix adjustable vacuum advance canisters allow you to optimize ignition advance for maximum part throttle performance and cruise speed efficiency. Replacement models are available for different distributor applications, such as GM HEI-type or billet models from PerTronix.

3.75 out of 5 stars ( 24 )

$34.78

—

$35.35

PerTronix Marine Distributor Caps

Maximize your ignition performance with PerTronix marine distributor caps! These marine distributor caps are non-vented with specially designed stainless steel hardware. They are designed to meet or exceed OEM specifications for accurate, dependable performance.

5.0 out of 5 stars ( 3 )

$75.76

PerTronix Flame-Thrower Plug and Play Billet Distributors with Ignitor II® Module

PerTronix Flame-Thrower plug and play billet distributors with Ignitor II® module are designed to provide maximum ignition performance and easy installation, all at a price that you can afford. They allow you to upgrade your outdated points or stock electronic distributor with a performance-proven unit. The distributors feature the patented Ignitor II® electronic ignition module and a CNC-machined 6061 T-6 polished billet housing. PerTronix electronics are compatible with any inductive ignition system coil, but high-rpm performance can be improved when they are used with the low-resistance (0.6 ohm) Flame-Thrower II coil. Their stand-alone design makes them plug-in units that require no additional ignition, but they are compatible with multi-spark CD ignition boxes for outstanding versatility. Additional features include a tempered shaft, an upper roller bearing, and an oil-impregnated sintered bronze lower bushing. The PerTronix Flame-Thrower plug and play billet distributors with Ignitor II® module come with a factory-set performance curve, a mechanical advance limiting adjustment, and a small, high-dielectric strength cap and rotor for applications with little clearance.

4.22 out of 5 stars ( 367 )

$296.99

—

$480.40

PerTronix Flame-Thrower Plug and Play Marine Distributors with Ignitor II® Module

PerTronix Flame-Thrower billet plug and play marine distributors feature the Ignitor II® electronic ignition module, a billet CNC-machined housing, an upper roller bearing, and a self-lubricating, oil-impregnated copper powder metal lower bushing. They are compatible with any inductive ignition system coil and come with a factory-preset performance curve, a mechanical advance limiting adjustment, and a small-diameter, high-dielectric strength cap and rotor.

4.31 out of 5 stars ( 80 )

$353.51

—

$464.46

PerTronix Flame-Thrower Plug and Play Billet Distributors with Ignitor III® Module

PerTronix Flame-Thrower plug and play billet distributors with Ignitor III® module offer the latest version of Pertronix's ignition modules. They include the patented Ignitor III® electronic ignition module and a CNC-machined 6061 T-6 polished billet housing. The Ignitor III® features adaptive dwell, which maintains peak energy throughout the entire rpm range, reduces misfires and improves engine performance. Peak current level is reached just prior to spark for maximum energy without the heat buildup and increased coil performance and module reliability. They adjust spark timing at higher rpm to compensate for the inherent electronic delay and increase energy for quicker, easier starting by sensing startup. The PerTronix Flame-Thrower plug and play billet distributors with Ignitor III® module have an integrated digital rev limiter with LED feedback for precise RPM setting and a memory safe function that stores settings eliminating unintended changes to the rev limit.

4.22 out of 5 stars ( 139 )

$448.57

—

$515.53

PerTronix Distributor Rotors

Some PerTronix Ignitor and Ignitor II kits are provided with a rotor to ensure proper magnet sleeve engagement. PerTronix replacement distributor rotors, as well as other parts and accessories, offer unmatched quality to accommodate the performance levels your distributor was engineered for. These rotors are available for a variety of distributor applications found in vehicles from the 1950s and up.

4.87 out of 5 stars ( 15 )

$17.85

PerTronix Flame-Thrower EST Distributors

Pertronix Flame-Thrower EST performance distributors for GM late model computer-controlled (EST) applications dramatically improve high-rpm performance. When used with their Flame-Thrower remote-mounted coil, voltage to the spark plugs is increased by more than 40 percent. These distributors are a direct bolt-in for most 1987-93 GM cars and 1987-95 trucks. Additional features and specifications include: * Housing is cast and machined from strong but light A384 alloy * Ignition modules are laser-trimmed for precise peak current control and use thick film technology for greater accuracy and improved reliability * High dielectric strength cap and rotor with solid brass terminals to prevent high-rpm arcing * Centerless-ground, corrosion-resistant shaft reduces friction and provides concentric operation * High-quality bronze sintered bushings are installed, aligned, and bored for accuracy and extended mileage use * A hardened steel distributor gear is machined to exact tolerances for a tighter mesh with the cam gear, eliminating horsepower losses caused by timing fluctuations found with excessive clearance and wear * Legal in all 50 states and Canada (CARB E.O. #D-57-13)

3.74 out of 5 stars ( 19 )

$273.06

—

$314.02

PerTronix Flame-Thrower HC Ignition Coils

Engineered for use with the PerTronix Ignitor III ignition modules, these PerTronix Flame-Thrower HC E-core coils are also compatible with most capacitive discharge boxes. So, you have options here! These coils charge to peak current typically 36-60 percent faster than other coils and yield an incredible 60,000 V. Supported in a special heat sink made from 6063 T5 aluminum that efficiently transfers heat away from the windings, these E-core design coils are what high efficiency and performance are all about. Get more bang for your buck when you combine PerTronix Flame-Thrower HC ignition coils with PerTronix Ignitor III ignition modules!

4.5 out of 5 stars ( 18 )

$116.39

PerTronix Vacuum Advance Lockouts

PerTronix vacuum advance lockouts are designed to eliminate the vacuum advance and remove the vacuum advance chamber from PerTronix distributors. Made of steel, they're available for both clockwise and counterclockwise rotation distributors. Installation is simple; no other modifications are required.

3.33 out of 5 stars ( 3 )

$12.26

31 Results Found For "HEI"