Availability
PerTronix Ignitor® solid-state ignition systems deliver more energy with greater timing accuracy. The secret lies in the trigger magnets, which spin with the rotor and operate a switching module that requires no external control box. These systems are immune to heat, oil, and debris—and install in about 15 minutes with only two wires to connect. They come with a switching module, hardware, and instructions. Ignitor® is an ideal choice for collector car restoration because it fits entirely under the distributor cap.
( 998 )
$101.11
—
$272.10
Pertronix Flame-Thrower stock look cast distributors are loaded with all of the features that you would expect from a high performance part, and yet they maintain the original look, for the ultimate "sleeper." Pertronix builds each distributor with all-new components, not from remanufactured parts like some companies do. No longer will you need to hassle with adjusting points or replacing capacitors, because these distributors are equipped with maintenance-free Ignitor electronics, providing decades of trouble-free operation. Each distributor is complete with a high-quality cap and rotor, so you're ready to run right out of the box. Stock look distributor features include: * All-new lightweight cast aluminum housing, modeled after the original Delco and Motorcraft distributors * Hardened gear ground to exact tolerances for precise mesh with cam * Adjustable vacuum advance canister, providing extra tunability * Optimized phasing to ensure maximum energy to the spark plug * Tailored advance curve for optimal performance and drivability * Integrated electronic ignition--available with solid-state Ignitor or the powerful Ignitor III with built-in adjustable REV limiter and multi-spark through redline * High dielectric strength cap and rotor with brass contacts
( 254 )
$139.22
—
$272.10
Not ones to leave well enough alone, the engineers at PerTronix set out to improve upon their highly successful Ignitor® ignition conversion systems. The Ignitor II® conversion systems have all of the same quality features as the original Ignitor®, plus a powerful microprocessor controller to deliver, on average, 4x more available energy between 3,000 and 5,000 rpm than standard ignition systems. They're an ideal choice for collector car restoration because they fit entirely under the distributor cap. Order the model recommended for your year/make, distributor and engine application. Features include: * Compatible with 12 V negative ground systems and any induction coil * High-rpm performance is improved when used with the PerTronix Flame-Thrower II super low- resistance (0.6 ohms) 45,000 V coil * Adaptive dwell maintains peak energy throughout the entire rpm range, reducing misfires while improving engine performance * Develops, on average, 2x more available plug voltage * Peak current level is reached just prior to spark for maximum energy without heat build-up, increasing coil and module life * Never change points again * Adjusts spark timing at higher rpm to compensate for the inherent electronic delay * Senses startup and develops more energy for quicker, easier starting * Built-in reverse polarity and over-current protection shuts down the system, preventing component damage * Cannot be used with solid core spark plug wires; suppression-style or spiral-wound spark plug wires must be used
( 294 )
$151.70
—
$272.10
PerTronix Ignitor lobe sensor solid-state ignition systems replace breaker points and troublesome factory units with a dependable, self-contained, and maintenance-free electronic ignition system. The Ignitor has been called the "stealth" ignition because of its quick installation and nearly undetectable presence under your distributor cap. There is no "black box" to clutter the engine compartment. PerTronix Ignitor has proven itself in applications ranging from race cars to tractors. Order the model recommended for your vehicle, engine, and distributor application. Product features: * Delivers twice the voltage to your spark plugs—increasing horsepower, fuel economy, and spark plug life * 2:1 improvement over "points" in current fall time for increased coil output * No points to burn or moving parts to wear out * No magnetic sleeve or ring needed; uses existing distributor lobe for sensor trigger * Epoxy molding makes the module impervious to dirt, oil, grease, and moisture * Stable timing—no need for any adjustments * Will trigger most multi-spark CD ignitions * Available for 6 and 12 V negative and positive ground systems
( 207 )
$125.97
—
$272.10
These PerTronix Ignitor III® solid-state ignition systems feature an adaptive dwell that maintains peak energy throughout the entire rpm range, reducing misfires while improving engine performance. Peak current level is reached just prior to spark for maximum energy without the heat buildup, increasing coil performance and module reliability. They adjust spark timing at higher rpm to compensate for the inherent electronic delay, sense startup, and develop more energy for quicker, easier starting. The PerTronix Ignitor III® solid-state ignition systems have a built-in LED for user feedback confirmation of the rev limiter setting.
( 83 )
$183.81
—
$272.10
These PerTronix replacement Flame-Thrower ignition modules feature the Hall effect integrated circuit triggered by a special magnetic sleeve fitted to the distributor shaft, which results in stable timing and precise spark distribution. They use a powerful micro-controller with dwell algorithms that allows the modules to adjust the dwell angle to maintain peak energy throughout the entire rpm range, increasing both the high and low rpm performance. Keep your distributor running smoothly and flawlessly with one of these PerTronix replacement Flame-Thrower ignition modules.
( 78 )
$135.14
—
$223.30
PerTronix Ignitor II® lobe sensor solid-state ignition systems are smarter! Ignitor II units sense the coil current level and employ a powerful micro-controller to adjust the dwell. Variable dwell helps to maintain peak energy throughout the entire rpm range, and these systems develop up to four times more energy between 3000 and 5000 rpm than standard ignition systems. Order the kit recommended for your vehicle and engine application. Features include: * Adaptive dwell maintains peak energy throughout the entire rpm range, reducing misfires while improving engine performance * Develops on-average four times more available energy between 3000 and 5000 rpm, and two times more available plug voltage * Compensates for inherent electronic delay by adjusting the spark timing throughout the entire rpm range * Synchronized peak current and spark timing reduces heat build-up * Senses startup and develops more energy for quicker, easier starting * Built-in reverse polarity and over-current protection shuts down the system, preventing component damage * No magnetic sleeve or ring needed; uses existing distributor lobe for sensor trigger
( 31 )
$161.75
—
$239.25
PerTronix digital rev limiters are micro-controller based digital units that provide much greater accuracy than analog systems. Rotary switches with 100 rpm increments permit easy setting, and eliminate the need for chips or jumpers commonly found on other limiters. They control rpm by randomly stealing sparks, reducing the fouling common with other brands. Each of these units includes two analog filters and one digital filter to eliminate unwanted entry of voltage noise from the coil. Plus, a tachometer output with a TTL interface makes these limiters compatible with most of today's OEM and aftermarket tachometers.
( 22 )
$190.46
PerTronix Flame-Thrower HEI III 4-pin ignition modules feature multiple sparks through the entire RPM range, plus an integrated high resolution digital rev-limiter. The rev-limiter settings are displayed with a LED feedback for precise RPM settings. Adaptive dwell maintains peak energy throughout the entire RPM range, reducing misfires while improving engine performance. Peak current level is reached just prior to spark for maximum energy without the heat build-up, increasing coil performance and module reliability. The PerTronix Flame-Thrower HEI III 4-pin ignition modules adjusts spark timing at higher RPMs to compensate for the inherent electronic delay and they can sense startup and increases energy for quicker, easier starting.
( 47 )
$100.52
Now you can get a quality distributor that delivers excellent performance and doesn't break the bank. Pertronix has taken all of the things that you like about the Bosch 009 distributor and the performance capabilities of the 010 and 060 distributors and designed them into these distributors. To top things off, these distributors feature integrated Ignitor electronics.
( 54 )
$169.60
—
$229.18
Flame-Thrower spark plug wires from PerTronix deliver a "high performance" look to your engine compartment, along with true high performance! They're available in universal or application-specific sets; assembled or not; for a variety of engines; with different distributor terminal and spark plug boot end options; multiple colors, sizes, and more. Features include: * Low 500 ohm per foot resistance * Silicon jackets to resist high temperatures, moisture, oil, and chemicals * EPDM (Ethylene Propylene Diene Monomer) rubber inner insulation for superior heat resistance and prevention of arcing and voltage leaks * Fiberglass reinforcing braid for added strength and flexibility * Two current paths for reliability and redundancy
( 117 )
$100.75
—
$145.85
These PerTronix Ignitor III® replacement Flame-Thrower distributor modules are direct bolt-in replacements for your PerTronix Flame-Thrower distributor. They install easily and require no cutting or modifications. Maintain excellent spark and smooth rpm operation with one of these PerTronix Ignitor III® replacement Flame-Thrower distributor modules.
( 14 )
$182.20
—
$223.30
PerTronix MAGX2 Ceramic boot wires are designed to prevent burnt wires from the high temperatures generated by your performance engine. Each wire is constructed from two layers of ultra-high temperature silicone and rated up to 600 degrees F. The ceramic boots provide protection to direct heat up to 2,000 degrees F. Available in universal sets with straight, 45 or 90-degree boots, these kits include the distributor boots and terminals for both male and female style distributor caps. Additional notes: * Two paths for the current: Features a spiral wound stainless steel alloy wrapped around a carbon impregnated fiberglass center core * Low 500 ohm per foot resistance
( 4 )
$145.85
PerTronix Flame-Thrower Ceramic Hi-Temp universal spark plug boots protect against direct heat, withstanding up to 2,000 degrees F. These universal boots provide the very best protection for applications with tight fitting headers or exhaust manifolds, and they fit typical 8mm spark plug wires. Pertronix offers the Flame-Thrower Ceramic Hi-Temp boots in several boot angle configurations individually and in sets of 8 to retrofit an entire spark plug wire set. Each kit includes pure silicone plug(s), wire bushing(s), spark plug terminal(s), and high-temperature ceramic boot(s).
( 36 )
$107.11
—
$123.60
Ignition parts can wear out over time, so keep your PerTronix industrial distributor in top working order with these replacement modules. Made to the same high-quality standards as the originals, PerTronix replacement modules will give you plenty of trouble-free ignition service.
( 9 )
$106.05
PerTronix quick-change crimping tools are available with the tool only (no dies)—or in kits with quick-release interchangeable dies and/or Weatherpack accessories. Unlike most crimpers, no tools are required to change the die sets. The die sets included in kits will handle the most common automotive terminals, including insulated and non-insulated, open barrel, D-subs, and spark plug wire terminals. The rugged carbon steel tool body is finished in corrosion-resistant black oxide, and the hardened die sets are zinc plated chromoly. PerTronix quick-change crimping tools are adjustable—and the ratcheting action provides a precise, uniform crimp every time. Kits include a molded plastic case for organization and storage. Order the replacement tool only, or the set best suited for your applications.
( 37 )
$129.82
—
$168.15
Keep your PerTronix Ignitor® or Ignitor II® conversion kit in top working condition with these replacement modules. There's no need to purchase a whole new PerTronix conversion kit; just replace the bad module and you'll be back on the road. Order the model designed for your specific vehicle application. Caution—these are not conversion kits; they are replacement modules only.
( 42 )
$101.64
—
$179.30
PerTronix Flame-Thrower upgrades your stock coil to something with more wallop! Flame-Thrower coils deliver more than 40,000 V of spark energy to your plugs for fuller, more complete combustion. They're available in a variety of primary resistance ohm versions, with either oil-filled canisters—which keep their low-resistance windings secure and cool for reliable long-term performance—or epoxy-filled canisters for extra vibration protection. Flame-Throwers are available in chrome or black (epoxy, black only). Order the style and options preferred for your application.
( 519 )
$135.25
—
$276.90
PerTronix Flame-Thrower tuneup kits not only make your tired stock HEI distributor young again, they make it better than it was before. The upgrade kits include many of the same components that make up PerTronix's powerful Flame-Thrower distributor: A 50,000 V coil and module; an alkyd cap and rotor; an adjustable vacuum advance canister; a high-performance advance kit; a wiring harness; a capacitor; and hardware. Order the model recommended for your year/make and engine application.
( 50 )
$161.37
—
$214.80
Engineered for use with the PerTronix Ignitor III ignition modules, these PerTronix Flame-Thrower HC E-core coils are also compatible with most capacitive discharge boxes. So, you have options here! These coils charge to peak current typically 36-60 percent faster than other coils and yield an incredible 60,000 V. Supported in a special heat sink made from 6063 T5 aluminum that efficiently transfers heat away from the windings, these E-core design coils are what high efficiency and performance are all about. Get more bang for your buck when you combine PerTronix Flame-Thrower HC ignition coils with PerTronix Ignitor III ignition modules!
( 18 )
$112.45
PerTronix alternators are designed for Volkswagens to allow the use of high-output sound systems, engine management systems, and off-road lighting, plus they are direct bolt-on replacements for air cooled Volkswagens. They are internally regulated for excellent output at idle and their internal fan helps to maximize cooling for improved component durability when used in extreme operating conditions. The alternators are available in natural or a show-quality polished finish. Order your application in your preference of finish.
( 2 )
$246.65
What's legal in all 50 states, including Canada? These Flame-Thrower HV ignition coils from PerTronix! Their HV E-core design yields an incredible 60,000 V and operates with no degradation throughout temperature ranges that surpass military specifications. The HV coils' special heat sink design, made from aircraft 6063 T5 aluminum, efficiently transfers heat-optimizing energy output for street/strip and off-road applications.
( 15 )
$114.53
—
$123.60
PerTronix spark plug wire rolls offer two current paths for reliability and redundancy: the primary path, spiral wound stainless steel alloy; and the secondary path, carbon impregnated fiberglass center core. The bulk spools of wire provide EPDM inner insulation for superior heat resistance and prevention of arcing and voltage leaks. Fiberglass reinforcing braid adds strength and flexibility. PerTronic wires are available for many popular applications equipped with Flame Thrower or original GM HEI distributors. These 100 ft. wire rolls are available in various sizes and colors, with or without script. Notes: * Low 500 ohm per foot resistance * Silicone jacket to resist high temperatures, moisture, oil, and chemicals
Not Yet Reviewed
$105.95
You can keep that power plant, which is the heart of your vehicle, beating strong with these PerTronix Flame-Thrower coil-on-plug ignition coils. Consistent spark is the key to everything engine related, and these Flame-Thrower ignition coils take your combustion chamber to a whole new level. Tough and powerful, these coils provide consistent spark throughout your rpm range up to 11,000 engine rpm. They have an optimized coil design that delivers up to 15 percent more spark energy to your plugs than OEM coils. Built to last, these ignition coils are engineered to withstand the rigors of heavy use. They are designed to replace your OEM coils with the same form factor, but with an epoxy molded shell to prevent moisture or winding fatigue. These PerTronix Flame-Thrower coil-on-plug ignition coils are available for various models; find your best fit and give your ignition system a great upgrade today.
( 24 )
$263.10
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
