Availability
These PerTronix replacement Flame-Thrower ignition modules feature the Hall effect integrated circuit triggered by a special magnetic sleeve fitted to the distributor shaft, which results in stable timing and precise spark distribution. They use a powerful micro-controller with dwell algorithms that allows the modules to adjust the dwell angle to maintain peak energy throughout the entire rpm range, increasing both the high and low rpm performance. Keep your distributor running smoothly and flawlessly with one of these PerTronix replacement Flame-Thrower ignition modules.
( 77 )
$135.14
—
$223.30
PerTronix Flame-Thrower HEI III 4-pin ignition modules feature multiple sparks through the entire RPM range, plus an integrated high resolution digital rev-limiter. The rev-limiter settings are displayed with a LED feedback for precise RPM settings. Adaptive dwell maintains peak energy throughout the entire RPM range, reducing misfires while improving engine performance. Peak current level is reached just prior to spark for maximum energy without the heat build-up, increasing coil performance and module reliability. The PerTronix Flame-Thrower HEI III 4-pin ignition modules adjusts spark timing at higher RPMs to compensate for the inherent electronic delay and they can sense startup and increases energy for quicker, easier starting.
( 47 )
$100.52
These PerTronix Ignitor III® replacement Flame-Thrower distributor modules are direct bolt-in replacements for your PerTronix Flame-Thrower distributor. They install easily and require no cutting or modifications. Maintain excellent spark and smooth rpm operation with one of these PerTronix Ignitor III® replacement Flame-Thrower distributor modules.
( 14 )
$182.20
—
$223.30
Keep your PerTronix Ignitor® or Ignitor II® conversion kit in top working condition with these replacement modules. There's no need to purchase a whole new PerTronix conversion kit; just replace the bad module and you'll be back on the road. Order the model designed for your specific vehicle application. Caution—these are not conversion kits; they are replacement modules only.
( 42 )
$106.05
—
$179.30
Ignition parts can wear out over time, so keep your PerTronix industrial distributor in top working order with these replacement modules. Made to the same high-quality standards as the originals, PerTronix replacement modules will give you plenty of trouble-free ignition service.
( 9 )
$101.89
—
$106.05
Pertronix Flame-Thrower ignition modules for GM and Ford distributors are direct replacements for the OEM modules and provide enhanced high-rpm performance. Flame-Thrower modules are available for most GM car and truck applications using both remote and in-cap coils in 4-pin, 7-pin, and 8-pin configurations. A Ford Thick Film Ignition (TFI-IV) module is also available (distributor mount only). Thick film technology on alumina ceramic substrates removes heat for greater accuracy and improved reliability, while laser trimming gives precise peak current control for increased energy output. Each module is tested twice with automated equipment to ensure trouble-free operation.
( 41 )
$112.95
—
$128.90
PerTronix Flame-Thrower tuneup kits not only make your tired stock HEI distributor young again, they make it better than it was before. The upgrade kits include many of the same components that make up PerTronix's powerful Flame-Thrower distributor: A 50,000 V coil and module; an alkyd cap and rotor; an adjustable vacuum advance canister; a high-performance advance kit; a wiring harness; a capacitor; and hardware. Order the model recommended for your year/make and engine application.
( 50 )
$161.37
—
$214.80
PerTronix Ignitor® solid-state ignition systems deliver more energy with greater timing accuracy. The secret lies in the trigger magnets, which spin with the rotor and operate a switching module that requires no external control box. These systems are immune to heat, oil, and debris—and install in about 15 minutes with only two wires to connect. They come with a switching module, hardware, and instructions. Ignitor® is an ideal choice for collector car restoration because it fits entirely under the distributor cap.
( 997 )
$99.95
—
$257.25
Not ones to leave well enough alone, the engineers at PerTronix set out to improve upon their highly successful Ignitor® ignition conversion systems. The Ignitor II® conversion systems have all of the same quality features as the original Ignitor®, plus a powerful microprocessor controller to deliver, on average, 4x more available energy between 3,000 and 5,000 rpm than standard ignition systems. They're an ideal choice for collector car restoration because they fit entirely under the distributor cap. Order the model recommended for your year/make, distributor and engine application. Features include: * Compatible with 12 V negative ground systems and any induction coil * High-rpm performance is improved when used with the PerTronix Flame-Thrower II super low- resistance (0.6 ohms) 45,000 V coil * Adaptive dwell maintains peak energy throughout the entire rpm range, reducing misfires while improving engine performance * Develops, on average, 2x more available plug voltage * Peak current level is reached just prior to spark for maximum energy without heat build-up, increasing coil and module life * Never change points again * Adjusts spark timing at higher rpm to compensate for the inherent electronic delay * Senses startup and develops more energy for quicker, easier starting * Built-in reverse polarity and over-current protection shuts down the system, preventing component damage * Cannot be used with solid core spark plug wires; suppression-style or spiral-wound spark plug wires must be used
( 294 )
$130.09
—
$272.10
PerTronix Ignitor II® lobe sensor solid-state ignition systems are smarter! Ignitor II units sense the coil current level and employ a powerful micro-controller to adjust the dwell. Variable dwell helps to maintain peak energy throughout the entire rpm range, and these systems develop up to four times more energy between 3000 and 5000 rpm than standard ignition systems. Order the kit recommended for your vehicle and engine application. Features include: * Adaptive dwell maintains peak energy throughout the entire rpm range, reducing misfires while improving engine performance * Develops on-average four times more available energy between 3000 and 5000 rpm, and two times more available plug voltage * Compensates for inherent electronic delay by adjusting the spark timing throughout the entire rpm range * Synchronized peak current and spark timing reduces heat build-up * Senses startup and develops more energy for quicker, easier starting * Built-in reverse polarity and over-current protection shuts down the system, preventing component damage * No magnetic sleeve or ring needed; uses existing distributor lobe for sensor trigger
( 30 )
$179.30
PerTronix Ignitor lobe sensor solid-state ignition systems replace breaker points and troublesome factory units with a dependable, self-contained, and maintenance-free electronic ignition system. The Ignitor has been called the "stealth" ignition because of its quick installation and nearly undetectable presence under your distributor cap. There is no "black box" to clutter the engine compartment. PerTronix Ignitor has proven itself in applications ranging from race cars to tractors. Order the model recommended for your vehicle, engine, and distributor application. Product features: * Delivers twice the voltage to your spark plugs—increasing horsepower, fuel economy, and spark plug life * 2:1 improvement over "points" in current fall time for increased coil output * No points to burn or moving parts to wear out * No magnetic sleeve or ring needed; uses existing distributor lobe for sensor trigger * Epoxy molding makes the module impervious to dirt, oil, grease, and moisture * Stable timing—no need for any adjustments * Will trigger most multi-spark CD ignitions * Available for 6 and 12 V negative and positive ground systems
( 207 )
$110.58
—
$272.10
These PerTronix Ignitor III® solid-state ignition systems feature an adaptive dwell that maintains peak energy throughout the entire rpm range, reducing misfires while improving engine performance. Peak current level is reached just prior to spark for maximum energy without the heat buildup, increasing coil performance and module reliability. They adjust spark timing at higher rpm to compensate for the inherent electronic delay, sense startup, and develop more energy for quicker, easier starting. The PerTronix Ignitor III® solid-state ignition systems have a built-in LED for user feedback confirmation of the rev limiter setting.
( 83 )
$158.47
—
$272.10
Engineered for use with the PerTronix Ignitor III ignition modules, these PerTronix Flame-Thrower HC E-core coils are also compatible with most capacitive discharge boxes. So, you have options here! These coils charge to peak current typically 36-60 percent faster than other coils and yield an incredible 60,000 V. Supported in a special heat sink made from 6063 T5 aluminum that efficiently transfers heat away from the windings, these E-core design coils are what high efficiency and performance are all about. Get more bang for your buck when you combine PerTronix Flame-Thrower HC ignition coils with PerTronix Ignitor III ignition modules!
( 18 )
$99.83
PerTronix Ignitor® and Ignitor II® external coil conversion kits make it easy to setup your ignition system with an external coil. These distributor replacement kits include components designed specifically for use with Ignitor® and Ignitor II® modules.
( 1 )
$145.85
Manufacturer Rebate
Pertronix Flame-Thrower stock look cast distributors are loaded with all of the features that you would expect from a high performance part, and yet they maintain the original look, for the ultimate "sleeper." Pertronix builds each distributor with all-new components, not from remanufactured parts like some companies do. No longer will you need to hassle with adjusting points or replacing capacitors, because these distributors are equipped with maintenance-free Ignitor electronics, providing decades of trouble-free operation. Each distributor is complete with a high-quality cap and rotor, so you're ready to run right out of the box. Stock look distributor features include: * All-new lightweight cast aluminum housing, modeled after the original Delco and Motorcraft distributors * Hardened gear ground to exact tolerances for precise mesh with cam * Adjustable vacuum advance canister, providing extra tunability * Optimized phasing to ensure maximum energy to the spark plug * Tailored advance curve for optimal performance and drivability * Integrated electronic ignition--available with solid-state Ignitor or the powerful Ignitor III with built-in adjustable REV limiter and multi-spark through redline * High dielectric strength cap and rotor with brass contacts
( 254 )
$148.95
—
$272.10
Manufacturer Rebate
Now you can get a quality distributor that delivers excellent performance and doesn't break the bank. Pertronix has taken all of the things that you like about the Bosch 009 distributor and the performance capabilities of the 010 and 060 distributors and designed them into these distributors. To top things off, these distributors feature integrated Ignitor electronics.
( 53 )
$169.60
—
$229.18
Manufacturer Rebate
PerTronix Flame-Thrower upgrades your stock coil to something with more wallop! Flame-Thrower coils deliver more than 40,000 V of spark energy to your plugs for fuller, more complete combustion. They're available in a variety of primary resistance ohm versions, with either oil-filled canisters—which keep their low-resistance windings secure and cool for reliable long-term performance—or epoxy-filled canisters for extra vibration protection. Flame-Throwers are available in chrome or black (epoxy, black only). Order the style and options preferred for your application.
( 516 )
$121.72
PerTronix is a leading producer of electronic distributors for gas, propane, and LP-powered industrial engines. Many Wisconsin and Continental engines are equipped with these industrial distributors from the factory. Proven performance, reduced maintenance downtime, improved economy, faster starts, and extended tune-up intervals are just some of the great benefits of these distributors. They are also direct replacements for many points-type Delco and Prestolite distributors. Integrated Ignitor electronic ignition technology eliminates the need for points and a condenser. The lightweight, yet durable housing has a superior venting system and O-ring seal to reduce oil leakage around the distributors. Each of these PerTronix industrial distributors comes with a non-tracking cap, rotor, and dust cover.
( 13 )
$237.77
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
