Availability
On Sale
PerTronix Ignitor® solid-state ignition systems deliver more energy with greater timing accuracy. The secret lies in the trigger magnets, which spin with the rotor and operate a switching module that requires no external control box. These systems are immune to heat, oil, and debris—and install in about 15 minutes with only two wires to connect. They come with a switching module, hardware, and instructions. Ignitor® is an ideal choice for collector car restoration because it fits entirely under the distributor cap.
( 1000 )
$125.15
$112.64
On Sale
Not ones to leave well enough alone, the engineers at PerTronix set out to improve upon their highly successful Ignitor® ignition conversion systems. The Ignitor II® conversion systems have all of the same quality features as the original Ignitor®, plus a powerful microprocessor controller to deliver, on average, 4x more available energy between 3,000 and 5,000 rpm than standard ignition systems. They're an ideal choice for collector car restoration because they fit entirely under the distributor cap. Order the model recommended for your year/make, distributor and engine application. Features include: * Compatible with 12 V negative ground systems and any induction coil * High-rpm performance is improved when used with the PerTronix Flame-Thrower II super low- resistance (0.6 ohms) 45,000 V coil * Adaptive dwell maintains peak energy throughout the entire rpm range, reducing misfires while improving engine performance * Develops, on average, 2x more available plug voltage * Peak current level is reached just prior to spark for maximum energy without heat build-up, increasing coil and module life * Never change points again * Adjusts spark timing at higher rpm to compensate for the inherent electronic delay * Senses startup and develops more energy for quicker, easier starting * Built-in reverse polarity and over-current protection shuts down the system, preventing component damage * Cannot be used with solid core spark plug wires; suppression-style or spiral-wound spark plug wires must be used
( 294 )
$185.65
$167.08
On Sale
PerTronix Ignitor lobe sensor solid-state ignition systems replace breaker points and troublesome factory units with a dependable, self-contained, and maintenance-free electronic ignition system. The Ignitor has been called the "stealth" ignition because of its quick installation and nearly undetectable presence under your distributor cap. There is no "black box" to clutter the engine compartment. PerTronix Ignitor has proven itself in applications ranging from race cars to tractors. Order the model recommended for your vehicle, engine, and distributor application. Product features: * Delivers twice the voltage to your spark plugs—increasing horsepower, fuel economy, and spark plug life * 2:1 improvement over "points" in current fall time for increased coil output * No points to burn or moving parts to wear out * No magnetic sleeve or ring needed; uses existing distributor lobe for sensor trigger * Epoxy molding makes the module impervious to dirt, oil, grease, and moisture * Stable timing—no need for any adjustments * Will trigger most multi-spark CD ignitions * Available for 6 and 12 V negative and positive ground systems
( 208 )
$144.25
$129.82
On Sale
These PerTronix Ignitor III® solid-state ignition systems feature an adaptive dwell that maintains peak energy throughout the entire rpm range, reducing misfires while improving engine performance. Peak current level is reached just prior to spark for maximum energy without the heat buildup, increasing coil performance and module reliability. They adjust spark timing at higher rpm to compensate for the inherent electronic delay, sense startup, and develop more energy for quicker, easier starting. The PerTronix Ignitor III® solid-state ignition systems have a built-in LED for user feedback confirmation of the rev limiter setting.
( 83 )
$223.85
$201.46
On Sale
PerTronix's Flame-Thrower 7mm "Stock Look" spark plug wire sets are designed to give you the ultimate in high performance, while retaining a stock appearance. The core consists of a carbon-impregnated fiberglass center that is spiral-wound with stainless steel alloy. They also feature: * Low 500 ohm per foot resistance * Silicone jackets to resist high temperatures, moisture, oil, and chemicals * EPDM rubber inner insulation for superior heat resistance and the prevention of arcing and voltage leaks * Fiberglass reinforcing braid for added strength and flexibility
( 140 )
$79.55
$71.60
On Sale
PerTronix's Flame-Thrower Street/Strip HEI distributors will produce 67 percent more energy in the coil, and deliver twice the energy across the spark gap. Plus, they deliver misfire-free performance up to a minimum of 7,500 rpm, a 3,000 rpm improvement over most original HEIs. Each distributor uses a new aluminum housing, cast and machined from a strong but lightweight A384 alloy. High-quality bronze sintered bushings are installed, aligned, and bored for accuracy and extended mileage use. Features include an adjustable vacuum advance, a high-performance mechanical curve kit, aluminum housing, a high dielectric strength cap with solid brass terminals, a balanced rotor, and a centerless-ground shaft.
( 49 )
$355.95
$320.36
On Sale
PerTronix Ignitor II® lobe sensor solid-state ignition systems are smarter! Ignitor II units sense the coil current level and employ a powerful micro-controller to adjust the dwell. Variable dwell helps to maintain peak energy throughout the entire rpm range, and these systems develop up to four times more energy between 3000 and 5000 rpm than standard ignition systems. Order the kit recommended for your vehicle and engine application. Features include: * Adaptive dwell maintains peak energy throughout the entire rpm range, reducing misfires while improving engine performance * Develops on-average four times more available energy between 3000 and 5000 rpm, and two times more available plug voltage * Compensates for inherent electronic delay by adjusting the spark timing throughout the entire rpm range * Synchronized peak current and spark timing reduces heat build-up * Senses startup and develops more energy for quicker, easier starting * Built-in reverse polarity and over-current protection shuts down the system, preventing component damage * No magnetic sleeve or ring needed; uses existing distributor lobe for sensor trigger
( 31 )
$190.95
$171.86
On Sale
Experts agree that HEI ignition performance relies on a quality module and coil. Pertronix believes the combination of a great module and a great coil makes their Flame-Thrower HEI distributors the best. They've engineered the module and coil to work together to provide you with superior ignition performance on the street or track. Compare the Flame-Thrower high performance module and coil to an original GM HEI distributor and you'll find these improvements: * Operates without misfires up to a minimum of 7,500 rpm, nearly 3,000 rpm higher than most enthusiasts report with their original HEI * Produces 67 percent more energy in the coil * Spark breakdown time (the amount of time until the spark plug has enough voltage to spark) is 45 percent faster, resulting in more accurate timing throughout the rpm range * Delivers twice the energy across the spark gap (during a one-millisecond burn time) * Spark duration and more energy to the spark allow wider plug gaps (.050 in.-.055 in.), increasing flame kernel growth These are dramatic improvements, not just because of a great module and coil, but also because they've been designed to work as a team to produce these results. Models and options are available for applications from the 1950s and up.
( 22 )
$355.95
—
$383.00
$320.36
—
$344.70
On Sale
Flame-Thrower Race HEI distributors from PerTronix produce 42 percent more energy in the coil, with 46 percent faster spark breakdown time. This allows 48 percent more peak current to reach the spark plug, compared to their Street/Strip HEI distributors. That's an enormous improvement over stock HEIs and most aftermarket HEI distributors. A specially designed vacuum lockout mechanism prevents timing adjustments that change rotor phasing, adversely affecting the burn time and efficient fuel combustion. The rotor plates are TIG-welded to the mechanical advance mechanism, preventing high-rpm distortion and improving mechanical reliability. Each distributor uses a new aluminum housing cast and is machined from a strong, but lightweight A384 alloy. They're supplied with a high-dielectric strength cap with solid brass terminals, a balanced rotor, and a low-resistance center coil brush. Also included are nylon rotor hold-down screws and a factory-installed, high performance mechanical curve kit with precision-machined weights and a center plate. A hardened, machined steel gear is standard, along with an electronic module and coil combination that excels in the 6,000 to 8,500 rpm range. These distributors are great for both Circle Track and drag race applications where factory-type HEI distributors are mandated.
( 9 )
$431.25
—
$463.10
$388.12
—
$416.79
On Sale
PerTronix Flame-Thrower magnetic trigger billet distributors are perfect alternatives to the more expensive distributors that competitors offer. These distributors feature a precision magnetic pickup coil and reluctor for extremely accurate signaling at low and high rpm. An over-molded magnetic pickup coil supports windings, while providing excellent resistance to corrosion. Tyco Mate-N-Lok connectors work with most ignition system harnesses. A specially engineered reluctor made from lightweight FC-0208 alloy offers superior dimensional stability for symmetrical spark separation. PerTronix Flame-Thrower magnetic trigger billet distributors are compatible with most capacitive discharge ignition boxes.
( 12 )
$395.70
$356.13
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
