Availability
On Sale
Now you can get a quality distributor that delivers excellent performance and doesn't break the bank. Pertronix has taken all of the things that you like about the Bosch 009 distributor and the performance capabilities of the 010 and 060 distributors and designed them into these distributors. To top things off, these distributors feature integrated Ignitor electronics.
( 54 )
$199.95
—
$433.40
$179.96
—
$390.06
On Sale
Servicing your billet or cast Flame-Thrower? PerTronix distributor cap and rotor kits are available to help you perform routine maintenance and make repairs. The caps are high-dielectric strength compound to minimize crossfire and "arc-through". They are available in red or black with male or female brass terminals and premium rotors with brass contacts. Restore power with PerTronix cap and rotor kits.
( 52 )
$19.30
$17.37
On Sale
These PerTronix vacuum canisters are direct replacements for your Flame-Thrower billet plug and play distributors. You can count on PerTronix to get the best performance out of your ride!
( 12 )
$28.10
$25.29
On Sale
Not ones to leave well enough alone, the engineers at PerTronix set out to improve upon their highly successful Ignitor® ignition conversion systems. The Ignitor II® conversion systems have all of the same quality features as the original Ignitor®, plus a powerful microprocessor controller to deliver, on average, 4x more available energy between 3,000 and 5,000 rpm than standard ignition systems. They're an ideal choice for collector car restoration because they fit entirely under the distributor cap. Order the model recommended for your year/make, distributor and engine application. Features include: * Compatible with 12 V negative ground systems and any induction coil * High-rpm performance is improved when used with the PerTronix Flame-Thrower II super low- resistance (0.6 ohms) 45,000 V coil * Adaptive dwell maintains peak energy throughout the entire rpm range, reducing misfires while improving engine performance * Develops, on average, 2x more available plug voltage * Peak current level is reached just prior to spark for maximum energy without heat build-up, increasing coil and module life * Never change points again * Adjusts spark timing at higher rpm to compensate for the inherent electronic delay * Senses startup and develops more energy for quicker, easier starting * Built-in reverse polarity and over-current protection shuts down the system, preventing component damage * Cannot be used with solid core spark plug wires; suppression-style or spiral-wound spark plug wires must be used
( 294 )
$179.30
—
$212.15
$161.37
—
$190.94
On Sale
PerTronix alternators are designed for Volkswagens to allow the use of high-output sound systems, engine management systems, and off-road lighting, plus they are direct bolt-on replacements for air cooled Volkswagens. They are internally regulated for excellent output at idle and their internal fan helps to maximize cooling for improved component durability when used in extreme operating conditions. The alternators are available in natural or a show-quality polished finish. Order your application in your preference of finish.
( 2 )
$246.65
—
$402.60
$221.98
—
$362.34
On Sale
These PerTronix Ignitor III® solid-state ignition systems feature an adaptive dwell that maintains peak energy throughout the entire rpm range, reducing misfires while improving engine performance. Peak current level is reached just prior to spark for maximum energy without the heat buildup, increasing coil performance and module reliability. They adjust spark timing at higher rpm to compensate for the inherent electronic delay, sense startup, and develop more energy for quicker, easier starting. The PerTronix Ignitor III® solid-state ignition systems have a built-in LED for user feedback confirmation of the rev limiter setting.
( 83 )
$212.15
$190.94
On Sale
Pertronix Flame-Thrower stock look cast distributors are loaded with all of the features that you would expect from a high performance part, and yet they maintain the original look, for the ultimate "sleeper." Pertronix builds each distributor with all-new components, not from remanufactured parts like some companies do. No longer will you need to hassle with adjusting points or replacing capacitors, because these distributors are equipped with maintenance-free Ignitor electronics, providing decades of trouble-free operation. Each distributor is complete with a high-quality cap and rotor, so you're ready to run right out of the box. Stock look distributor features include: * All-new lightweight cast aluminum housing, modeled after the original Delco and Motorcraft distributors * Hardened gear ground to exact tolerances for precise mesh with cam * Adjustable vacuum advance canister, providing extra tunability * Optimized phasing to ensure maximum energy to the spark plug * Tailored advance curve for optimal performance and drivability * Integrated electronic ignition--available with solid-state Ignitor or the powerful Ignitor III with built-in adjustable REV limiter and multi-spark through redline * High dielectric strength cap and rotor with brass contacts
( 254 )
$255.65
—
$318.80
$230.08
—
$286.92
On Sale
PerTronix's Flame-Thrower 7mm "Stock Look" spark plug wire sets are designed to give you the ultimate in high performance, while retaining a stock appearance. The core consists of a carbon-impregnated fiberglass center that is spiral-wound with stainless steel alloy. They also feature: * Low 500 ohm per foot resistance * Silicone jackets to resist high temperatures, moisture, oil, and chemicals * EPDM rubber inner insulation for superior heat resistance and the prevention of arcing and voltage leaks * Fiberglass reinforcing braid for added strength and flexibility
( 140 )
$64.60
—
$67.90
$58.14
—
$61.11
On Sale
Keep your PerTronix Ignitor® or Ignitor II® conversion kit in top working condition with these replacement modules. There's no need to purchase a whole new PerTronix conversion kit; just replace the bad module and you'll be back on the road. Order the model designed for your specific vehicle application. Caution—these are not conversion kits; they are replacement modules only.
( 42 )
$112.45
—
$179.30
$101.20
—
$161.37
On Sale
Flame-Thrower spark plug wires from PerTronix deliver a "high performance" look to your engine compartment, along with true high performance! They're available in universal or application-specific sets; assembled or not; for a variety of engines; with different distributor terminal and spark plug boot end options; multiple colors, sizes, and more. Features include: * Low 500 ohm per foot resistance * Silicon jackets to resist high temperatures, moisture, oil, and chemicals * EPDM (Ethylene Propylene Diene Monomer) rubber inner insulation for superior heat resistance and prevention of arcing and voltage leaks * Fiberglass reinforcing braid for added strength and flexibility * Two current paths for reliability and redundancy
( 118 )
$61.95
—
$67.90
$55.76
—
$61.11
On Sale
PerTronix Flame-Thrower plug and play billet distributors with Ignitor III® module offer the latest version of Pertronix's ignition modules. They include the patented Ignitor III® electronic ignition module and a CNC-machined 6061 T-6 polished billet housing. The Ignitor III® features adaptive dwell, which maintains peak energy throughout the entire rpm range, reduces misfires and improves engine performance. Peak current level is reached just prior to spark for maximum energy without the heat buildup and increased coil performance and module reliability. They adjust spark timing at higher rpm to compensate for the inherent electronic delay and increase energy for quicker, easier starting by sensing startup. The PerTronix Flame-Thrower plug and play billet distributors with Ignitor III® module have an integrated digital rev limiter with LED feedback for precise RPM setting and a memory safe function that stores settings eliminating unintended changes to the rev limit.
( 137 )
$433.40
$390.06
On Sale
PerTronix Flame-Thrower plug and play billet distributors with Ignitor II® module are designed to provide maximum ignition performance and easy installation, all at a price that you can afford. They allow you to upgrade your outdated points or stock electronic distributor with a performance-proven unit. The distributors feature the patented Ignitor II® electronic ignition module and a CNC-machined 6061 T-6 polished billet housing. PerTronix electronics are compatible with any inductive ignition system coil, but high-rpm performance can be improved when they are used with the low-resistance (0.6 ohm) Flame-Thrower II coil. Their stand-alone design makes them plug-in units that require no additional ignition, but they are compatible with multi-spark CD ignition boxes for outstanding versatility. Additional features include a tempered shaft, an upper roller bearing, and an oil-impregnated sintered bronze lower bushing. The PerTronix Flame-Thrower plug and play billet distributors with Ignitor II® module come with a factory-set performance curve, a mechanical advance limiting adjustment, and a small, high-dielectric strength cap and rotor for applications with little clearance.
( 356 )
$387.25
—
$388.85
$348.52
—
$349.96
On Sale
PerTronix Ignitor® solid-state ignition systems deliver more energy with greater timing accuracy. The secret lies in the trigger magnets, which spin with the rotor and operate a switching module that requires no external control box. These systems are immune to heat, oil, and debris—and install in about 15 minutes with only two wires to connect. They come with a switching module, hardware, and instructions. Ignitor® is an ideal choice for collector car restoration because it fits entirely under the distributor cap.
( 1000 )
$145.85
—
$234.45
$131.26
—
$211.00
On Sale
PerTronix Flame-Thrower plug and play billet distributors with Ignitor I® module are designed to provide maximum ignition performance and easy installation, all at a price that you can afford. They allow you to upgrade your outdated points or stock electronic distributor with a performance-proven unit. The distributors feature the patented Ignitor I® electronic ignition module and a CNC-machined 6061 T-6 polished billet housing. PerTronix electronics are compatible with any inductive ignition system coil, but high-rpm performance can be improved when they are used with the low-resistance (0.6 ohm) Flame-Thrower II coil. Their stand-alone design makes them plug-in units that require no additional ignition, but they are compatible with multi-spark CD ignition boxes for outstanding versatility. Additional features include a tempered shaft, an upper roller bearing and an oil-impregnated sintered bronze lower bushing. The PerTronix Flame-Thrower plug and play billet distributors with Ignitor I® module come with a factory-set performance curve, a mechanical advance limiting adjustment, and a small, high-dielectric strength cap and rotor for applications with little clearance.
( 2 )
$387.25
—
$439.75
$348.52
—
$395.78
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
