Availability
Painless Performance 21-circuit direct-fit Jeep CJ harnesses are fully grounded for use with fiberglass Jeep bodies. Almost every circuit on these 3-section harnesses are pre-terminated at both ends. Painless uses an OEM-style bulkhead connector that attaches to the bulkhead without any special brackets or modifications. The blade-type fuse block wiring is factory terminated and machine crimped. Each wire is custom printed with the circuit identification as well as using factory color codes for easy installation. These harnesses are not equipped for computer controls, nor is it engine specific. Water temperature sender, oil gauge sender, alternator, starter solenoid, tach lead, ballast resistor, and fuel tank sender are not pre-terminated. Includes circuits for: * Air conditioning/heat * Accessory/cigarette lighter * Backup lights * Brake lights * Charging * Dome light * Electric choke * Emergency flashers * Fan relay * Fused power source * Headlights * Horn * Ignition coil * Instrument panel lighting and gauges (see notes above) * Parking lights * Radio (constant/ignition hot) * Starting * Taillights and trailer lights * Turn signals * Under hood light * Wipers and washer pump
( 27 )
$899.99
Painless Performance C.S.I. universal weatherproof engine harnesses provide wiring to accommodate the charging, starting, and ignition of just about any non-fuel injected engine. The C.S.I. is the Painless solution to repairing damaged wiring on your carbureted engine or for cleaning up the clutter and taking the guesswork away from those swapping from fuel injection to a carburetor. They also work great as an engine dyno harness. Accessory circuits aid in re-connecting a factory fuse block, electric fuel pump, electric water pump, electric cooling fans, light switch, etc. Each wire is custom printed with the circuit identification as well as using GM color codes for easy installation. Includes circuits for: * Accessory #1 switched B+ * Accessory #2 constant B+ * Accessory #3 unfused constant B+ * Charging * Electric choke * Ignition * Oil gauge * Starting * Tachometer * Temperature gauge * Voltmeter
( 2 )
$184.99
Nothing could make re-wiring your Chevy/GMC truck any easier than Painless Performance harnesses. By adding a factory-style bulkhead connector and additional GM connectors, Painless made their universal harness a custom fit for these popular 2x4 and 4x4 GMC/Chevy pickups. These harnesses will work on pickups, Blazers and Suburbans. Includes circuits for: * Air conditioning * Heat * Camper cover lights * Cigarette lighter * Four wheel drive switch * Backup lights * Charging * Cruise control * Dome light * Electric choke * Electric fuel pump * Emergency flashers * Fan relay activation power * Fused power source * Headlights * Horn (relay) * Ignition coil * Instrument panel lighting and gauges * Park lights * Power antenna * Power door locks * Power windows * Radio/clock (constant and switched) * Starting * Taillights * Third brake lights * Turn signals * Wipers and washer pump
( 43 )
$635.99
Painless Performance 21-circuit 1967-77 direct-fit Ford F-Series harnesses are the perfect upgrade for your Ford truck. They use many of the factory connections and are already pre-terminated. Each harness features a unique covered micro-fuse block with a 20 amp auxiliary relay circuit for accessories, such as fog lights, or an electric fuel pump. Each wire is custom printed with the circuit identification as well as using Ford color codes for easy installation. Includes circuits for: * Air conditioning/heat * Accessory (relayed) * Accessory/cigarette lighter * Backup lights * Brake lights * Cargo Lamp * Charging * Dome light * Electric choke * Emergency flashers * Fused power source * Headlights * Horn * Ignition coil * Instrument panel lighting and gauges (see notes above) * Parking lights * Radio (constant/ignition hot) * Starting * Taillights and license plate light * Turn signals * Wipers and washer pump
( 9 )
$774.99
Painless Performance 24-circuit 1967-68 Camaro and Firebird harnesses are designed as direct replacements for your vehicle. They use a 1969 and newer style bulkhead connector design along with blade fuses and enough circuits to wire up just about any installed upgrade to your 1st generation F-body. Some minor bulkhead modifications are required. Factory original quick connect terminals are included for the in-dash printed circuit board. Each harness includes a detailed manual and each wire is custom printed with the circuit identification as well as using GM color codes for easy installation. Includes circuits for: * Air conditioning/heat * Accessory/cigarette lighter * Accessory/trunk light * Backup lights * Brake lights * Charging * Dome and courtesy lights * Electric choke * Electric fuel pump * Emergency flashers * Fan relay activation power * Fused power source * Headlights * Horn * Ignition coil * Instrument panel lighting and gauges (see notes above) * Parking lights * Power door locks * Power windows * Radio (constant/ignition hot) * Starting * Taillights and license plate light * Third brake light * Turn signals * Wipers and washer pump
( 18 )
$584.99
Painless Performance 22-circuit direct fit 1965-66 Mustang chassis harness have many of the factory connectors already installed on the harnesses out of the box. They use unique covered micro-fuse blocks and also feature auxiliary circuits with a 20 amp relay for accessories such as fog lights or an electric fuel pump. Each wire is custom printed with the circuit identification as well as using Ford color codes for easy installation. Includes circuits for: * Air conditioning/heat * Accessory relay * Accessory/cigarette lighter * Backup lights * Brake lights * Charging * Courtesy and dome lights * Electric choke * Emergency flashers * Fan relay activation power * Fused power source * Glove box light * Headlights * Horn * Ignition coil * Instrument panel lighting and gauges (see notes above) * Parking lights * Radio (constant/ignition hot) * Starting * Taillights and license plate lights * Turn signals * Wipers and washer pump
( 12 )
$896.99
Painless Performance 21-circuit Mopar color-coded universal wiring harnesses can be used in almost any application where you want Mopar color-coded wires. They eliminate the troublesome bulkhead connector and use a unique covered micro-fuse block. Also featured is an auxiliary circuit with a 20 amp relay for accessories such as fog lights or an electric fuel pump. Each wire is custom printed with the circuit identification for easy installation. Includes circuits for: * Air conditioning/heat * Accessory (relayed) * Backup lights * Brake lights * Charging * Dome light * Electric choke * Emergency flashers * Fan relay activation power * Fused power source * Headlights * Horn * Ignition coil * Instrument panel lighting and gauges (see notes above) * Parking lights * Radio (constant/ignition hot) * Starting * Taillights and license plate light * Third brake light * Turn signals * Wipers
( 27 )
$599.99
Painless Performance 28-circuit universal harnesses include most of the power accessory circuits you have been looking to add to your vehicle. The versatility of these harnesses will allow them to be easily adapted to almost any vehicle. The GM column-mounted harnesses include ignition switch plugs and turn signal switch plugs, pre-terminated and ready to install. They also have pre-wired plugs for the headlights and dimmer switch. The dash mounted units do not include the GM column-mounted ignition switch plugs, but do include the GM column-mounted turn signal switch plugs and terminals. Each harness includes circuits for: * Air conditioning/heat * Accessory * Accessory/cigarette lighter * Accessory/trunk light * Backup lights * Brake lights * Charging * Cruise control * Dome light * Electric choke * Electric fuel pump * Emergency flashers * Fan relay activation power * Fused power source * Headlights * Horn * Ignition coil * Instrument panel lighting and gauges (see notes above) * Parking lights * Power antenna * Power door locks * Power windows * Radio (constant/ignition hot) * Starting * Taillights * Third brake light * Turn signals * Wipers
( 74 )
$339.99
—
$365.99
Painless Performance 22-circuit 1969-70 Mustang chassis harnesses have many of the factory connectors already installed on the harnesses out of the box. They use unique covered micro-fuse blocks and also feature an auxiliary circuit with 20 amp relay for accessories, such as fog lights or an electric fuel pump. Each wire is custom printed with the circuit identification as well as using Ford color codes for easy installation. Includes circuits for: * Air conditioning/heat * Accessory relay * Accessory/cigarette lighter * Backup lights * Brake lights * Charging * Courtesy and dome lights * Electric choke * Emergency flashers * Fused power source * Glove box light * Headlights * Horn * Ignition coil * Instrument panel lighting and gauges (see notes above) * Parking lights * Radio (constant/ignition hot) * Starting * Taillights and license plate lights * Turn signals * Wipers and washer pump
( 6 )
$863.99
Painless Performance 22-circuit 1967-68 Mustang chassis harnesses have many of the factory connectors already installed on the harnesses out of the box. They use unique covered micro-fuse blocks and also feature an auxiliary circuit with 20 amp relay for accessories such as fog lights or an electric fuel pump. Each wire is custom printed with the circuit identification as well as using Ford color codes for easy installation. Includes circuits for: * Air conditioning/heat * Accessory relay * Accessory/cigarette lighter * Backup lights * Brake lights * Charging * Courtesy and dome lights * Electric choke * Emergency flashers * Fused power source * Glove box light * Headlights * Horn * Ignition coil * Instrument panel lighting and gauges (see notes above) * Parking lights * Radio (constant/ignition hot) * Starting * Taillights and license plate lights * Turn signals * Wipers and washer pump
( 10 )
$789.99
Painless Performance 28-circuit universal GM truck harnesses can be used in just about any pickup where basic-or-more wiring is needed. Ample wire lengths make these kits especially suited for everything, including long beds and extra cabs. GM column-mounted kits include GM (column-mounted) ignition switch plugs and the GM (column-mounted) turn signal switch plugs pre-terminated and ready to install. Painless Performance 28-circuit universal truck harnesses use GM color codes for easy installation. Includes circuits for: * Air conditioning/heat * Accessory * Backup lights * Accessory/trunk light * Backup lights * Brake lights * Charging * Cruise control * Dome light * Electric choke * Electric fuel pump * Emergency flashers * Fan relay activation power * Fused power source * Headlights * Horn * Ignition coil * Instrument panel lighting and gauges (see notes above) * Parking lights * Power antenna * Power door locks * Power windows * Radio (constant/ignition hot) * Starting * Taillights * Third brake light * Turn signals * Wipers
( 15 )
$395.99
Painless Performance 28-circuit universal muscle car harnesses are a perfect solution to your wiring needs. They are designed to fit 1960s, 70s, or 80s GM, Ford, and Chrysler muscle cars where a bulkhead connector is required. These harnesses use the highest quality thermal-crossed linked (TXL) polyethylene wire rated to 275 degrees at 600 V--twice the voltage load of standard GPT wire. That's power on demand! Some minor bulkhead modification may be required. Please be sure to check the fitment of this harness, as there may be a more direct fit harness available for your vehicle. Includes circuits for: * Air conditioning/heat * Accessory * Accessory/cigarette lighter * Accessory/trunk light * Backup lights * Brake lights * Charging * Cruise control * Dome light * Electric choke * Electric fuel pump * Emergency flashers * Fan relay activation power * Fused power source * Headlights * Horn * Ignition coil * Instrument panel lighting and gauges (see notes above) * Parking lights * Power antenna * Power door locks * Power windows * Radio (constant/ignition hot) * Starting * Taillights * Third brake light * Turn signals * Wipers
( 3 )
$539.99
If you want to keep your race car streetable and want to use all of your factory switches instead of a switch panel, Painless Performance 21-circuit Pro Street chassis harnesses are for you. Each wire is labeled and is pre-terminated at the fuse block for easy installation. They also include an optional connector if you want to use a GM column mounted ignition switch. Also, with each harness is a terminal assortment kit, with the necessary connectors for your turn signal switch, headlights, and alternator. Each wire is custom printed with the circuit identification as well as using GM color codes for easy installation. Includes circuits for: * Accessory #1 * Accessory #2 * Brake Lights * Charging * Dome light * Electric fuel pump #1 * Electric fuel pump #2 * Electric water pump * Emergency flashers * Fan relay activation power * Fused power source * Headlights * Horn * Ignition coil * Park lights * Radio and gauges B+ * Starting * Taillights * Third brake light * Turn signals * Wipers
( 6 )
$327.99
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
