Availability
If you're looking for heavy-duty toggle switches, look no further than Painless Performance. These 20 amp switches are available in a variety of configurations to suit your needs.
( 31 )
$8.99
—
$10.99
Need to replace the relay in one of your Painless Performance kits? Then try Painless Performance single pole/single throw relays. They are replacement relays for use with Cirkit Boss, horn relay, or fan relay kits.
( 14 )
$6.99
Painless Performance Anti-Abrasion High Heat Tape has been specially designed for bundling and wire protection against abrasion. The tape will withstand the heat and chemicals in the engine compartment of a car, all while providing a clean and tidy look. It is rated for -40 to 302 degrees F temperatures.
( 1 )
$10.99
Painless Performance offers alternator backfeed diode kits for race car switch panels. In some cases, the GM 10SI and 12SI alternators backfeed through the regulator excitation wire—not allowing the engine to be shut off with the ignition switch. This diode, heat shrink, and butt-splice replacement kit lets you stop the backfeeding by installing it inline on the ignition switched wire going to the regulator's pin #1.
( 18 )
$8.99
Painless Performance offers GM-style door jamb switches for a wide range of vehicles. These replacements are ideal for rebuilds or to swap out a faulty switch. They typically activate your overhead light when the door is opened or closed.
( 19 )
$5.99
Painless Performance Weatherpack connector kits are ideal for use where rain, dust, or other elements may affect your electrical connections. Each kit includes a male and a female connector and the appropriate number of terminals. Choose the kit needed for your project.
( 23 )
$7.99
—
$10.99
These Painless Performance relay base ports are made of high-impact ABS thermoplastic materials. Terminals are also included.
( 6 )
$7.99
Painless Performance replacement diode assemblies are direct replacements for the diodes included in the Painless Performance rocker switch panels. They come with pre-terminated wire connectors and are shrink-wrapped for maximum protection.
( 18 )
$7.99
Painless Performance 4-circuit ATO fuse centers can be used on most any vehicle where additional circuits are needed. These OEM-style fuse centers are ideal for in-line wiring applications, such as trailer wiring or when adding vehicle accessories. Their compact size makes them easy to mount just about anywhere! Fuse block crimp-on terminals included. Additional product features and details: * Polyethylene liner seals face plate * Water-resistant seal * Key ignition switch for added security * Protected with weather-resistant boots, and are vibration-resistant * Fully insulated terminals * Includes peel-and-stick labels for custom wiring
( 8 )
$8.99
Painless Wiring relays and relay kits enable you to make simple updates or replacements in your vehicle. From lights to fans to starters, Painless has a relay for you. Easy to install in most vehicles, these kits include all necessary wiring and connectors. Order the amp rating and terminal options needed for your application.
( 32 )
$5.99
—
$10.99
Try using Painless Performance replacement rocker switches for all of those special lighting applications that you want controlled. These switches are available in either lighted (with several colors to choose from) or non-lighted styles.
( 15 )
$9.99
—
$10.99
Perfect for hundreds of uses, these warning lights from Painless Wiring are available in 5/16 in. and 1/2 in. diameters. They come in your choice of amber, red, green, and blue.
( 45 )
$8.99
—
$9.99
Painless Performance offers a variety of dash mounted and floor mounted dimmer switches to suit your needs. They give you the control you want over your lighting.
( 5 )
$9.99
Painless Performance MIDI fuses protect your vehicle's currents. They offer cost-effective, high-current wiring protection, and are available in fuse ratings from 70 to 200 amps. Guard the electrical systems in your automobiles and trucks with Painless Performance MIDI fuses.
( 5 )
$5.99
Painless wiring connectors make electrical work in your car or truck a snap. They are easy to install and they give your vehicle a clean and organized appearance. They work really well, too!
( 54 )
$4.99
—
$9.99
Painless Performance HEI power pigtails will get power from your ignition to your HEI distributor on a GM HEI. They come with an 8 in. lead, and plug into the OEM distributor cap. These pigtails are perfect for replacing worn or damaged connectors.
( 7 )
$6.99
Hook up your GM HEI distributor and tachometer the pain-free way with Painless Performance pigtails. These replacements easily connect to your distributor and splice into your tach power supply. An OEM distributor connector with 6 ft. of wire is included in the packages to complete the job. Go trouble-free with Painless Performance HEI tachometer lead pigtails.
( 16 )
$9.99
Painless Performance offers 70-amp maxi fuses individually as replacements for their maxi fuse assemblies, as well as other brands. Protect high amperage vehicle circuits with Painless maxi fuses.
( 3 )
$4.99
Painless Performance weatherproof toggle switch boots fit over a standard toggle switch to protect against harsh elements. They are made of high-quality rubber, feature a black finish, and will slide over most short-type toggle switches.
Not Yet Reviewed
$4.99
Painless Performance GM ignition switch parts kits contain all the electrical connectors and terminals for your early GM keyed steering column application. Look to Painless Performance for all your ignition and wiring needs.
( 1 )
$9.99
Painless Performance alternator pigtails are replacement pigtails using the factory original plug for popular General Motors alternators. They are pre-terminated with the ignition input wire and the voltage-sensing wire.
( 13 )
$8.99
Painless Performance Self-Sealing Tape is easy to apply and cleans up loom installations without leaving a residue. It easily seals to itself for securing looms near connectors and splices. Use this tape to bundle and wrap wires, weatherproof connections, and more!
Not Yet Reviewed
$6.95
Do you need to convert or repair your existing multi-port fuel injection harness? These Painless Performance fuel injector wiring connectors enable you to repair crushed or broken connectors on your factory harness and will also allow you to convert over to the EV6/USCar injectors that can be found on modern multi-port fuel injection systems. Painless Performance fuel injector wiring connectors contain the necessary terminals, seals, terminal locks, and connectors to fit 8 injectors.
( 20 )
$6.99
—
$7.99
Protect your vehicle's electrical system from potentially harmful voltage spikes with these surge protectors from Painless Performance. These easy-to-install devices clip the spikes at 14.5 V to protect sensitive electrical accessories.
( 2 )
$9.99
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
