Availability
If you’re serious about automotive service equipment for your shop or garage, you need gear from OTC Tools, and Summit Racing has it all. OTC Tools is a major...
If you’re serious about automotive service equipment for your shop or garage, you need gear from OTC Tools, and Summit Racing has it all. OTC Tools is a major manufacturer of vehicle electronic diagnostic instruments, automotive service tools, shop equipment, and general-purpose tools. Mechanics around the world use OTC Tools to pinpoint problems in fuel, cooling, braking, and other electrical and hydraulic systems. They also turn to OTC for the specialized tools and kits needed to install and repair those systems.
If you’re serious about automotive service equipment for your shop or garage, you need gear from OTC Tools, and Summit Racing has it all. OTC Tools is a major manufacturer of vehicle electronic diagnostic instruments, automotive service tools, shop equipment, and general-purpose tools. Mechanics around the world use OTC Tools to pinpoint problems in fuel, cooling, braking, and other electrical and hydraulic systems. They also turn to OTC for the specialized tools and kits needed to install and repair those systems.
These OTC 6,000 lb. capacity revolver stands will handle the heaviest of engines. OTC designed these stands with a 96:1 ratio worm gear set, and the crank handle can be locked in any position. Their integral 12-ton jack raises the work to provide the swing radius needed for clearance.
Not Yet Reviewed
$6,892.99
—
$8,162.99
These OTC front coil spring compressors work on most late model rear-wheel drive American-made models where the spring is located between upper and lower control arms. OTC manufactures these tools for performance and dependability. They include four case-hardened, self-aligning plates to ensure proper load distribution under tension.
( 53 )
$266.99
OTC's cylinder leakage tester kits quickly diagnose internal engine problems, such as bad rings, valves, and leaking head gaskets. OTC includes an adjustable regulator, fittings, hose assembly, and a case.
( 66 )
$116.99
OTC's heavy-duty engine hoist, model 1819, offers several benefits including increased efficiency, reduced risk of injury, and improved productivity. The heavy-duty engine hoist allows for quick and easy lifting and moving heavy loads like engines, transmissions, and other bulky components, making it a valuable tool for mechanics and technicians. By minimizing the need for manual lifting, the crane also helps reduce risk of back injuries and other strain-related issues. Roller bearing wheels and a steering dolly offer easy movement and precise positioning of the crane. Product features: * Heavy-duty construction and precision engineering ensure long-lasting performance and reliability * Can be used for various tasks beyond engine removal, including lifting transmissions, axles, and other heavy components * The hoist has a 2,200 lb. capacity with the boom retracted and 1,650 lb. capacity with the boom extended * Telescoping boom extension and adjustable leg spread allow for versatile positioning and access to different areas * Equipped with 2-speed hydraulic hand pump * 16 7/8 in. lifting chain * Engine hoist * Space-saving fold-away feature for storage
Not Yet Reviewed
$5,869.99
OTC axle shaft seal installers for are designed for use on select Ford F-Series Super Duty trucks that have a vacuum-operated front axle. The drivers are built into the installers, saving you time and money! They correctly install the seal onto the axle shaft and into the wheel knuckle, preventing front hub vacuum leaks that would cause the 4WD to not engage.
( 27 )
$143.99
OTC Revolver engine stand adapter plates are available for a long list of engines from Detroit Diesel to Volvo. Many of these steel plates will require the universal adapter assembly for mounting individual plates to your OTC Revolver engine stand. Choose the plate(s) for the engine(s) your work on.
( 2 )
$452.99
—
$1,951.99
OTC engine load levelers are designed to hook to a crane or hoist to handle and position large pieces. OTC engine load levelers can be adjusted to compensate for off-center loads or be adjusted horizontally.
( 27 )
$116.99
—
$2,799.99
Quickly separate rusted, frozen, or seized outside dual wheels or single wheels from the wheel hub with the OTC wheel separators. The unique outer drive hook has an offset handle to easily align the tools on the rim to break wheels loose, with a flat side to eliminate turning during use. Outer drive hook has two grooves for 16 in. to 17 in. wheels and 19.5 in. to 24.5 in. wheels. Force is applied directly to the wheel rim and not the wheel lip, preventing damage and bending of the wheel.
( 3 )
$274.99
OTC high performance hydraulic rams are made for strength, safety, and performance. These OTC hydraulic rams feature threaded ram collars and internal base threads to simplify mounting, as well as threaded piston rod ends. These hydraulic rams are a great replacement for worn-out leaky rams on body and frame equipment.
( 2 )
$633.99
—
$2,076.99
OTC harmonic balancer pullers are designed for removing damper pulleys in tight engine compartments without removing the radiator. This OTC kit includes a 3-jaw puller, four lengths of forcing rods, and a forcing screw with a 3/8 in. square drive for ratchet use, and a 3/4 in. hex for wrench or socket use.
( 74 )
$94.99
—
$119.99
OTC heavy-duty Motor-Rotor repair stands put a better spin on maintenance of your engines, transmissions, torque converters, and rear axles from your trucks, tractors, and construction machinery. Featuring a 50:1 ratio gear box, these steel stands allow for a full rotation of mounted units with just a turn of the crank and they lock in position. The positive-crank handle locking mechanism ensures engine stability in all positions, and locking rear wheels anchor the stands in position. These extremely stable work-holding units have a twin-post design featuring laterally adjustable, 3-position outboard support. Work safely, more efficiently, and more comfortably standing beside OTC Tools heavy-duty Motor-Rotor repair stands.
( 2 )
$2,119.99
OTC complete deluxe compression tester kits offer a complete package for compression testing on gas engines. OTC also includes the deep well connector used on recessed plug well style heads and the new Ford Triton engine adapter using 16mm thread plugs. Kits include: * Flat and tapered seat plug adapters * 25 in. flexible hose * 2.50 in. gauge * Dual scale * 8 in. deep well 14mm connector * 5 in. flex Ford Triton 16mm adapter * 12 in. flex hose with a 14mm standard reach * 12 in. flex hose with a 14mm long reach * Carrying case
( 38 )
$116.99
—
$164.99
OTC 1,500 lb. capacity auxiliary stands are used under hoist to provide partial support for positioning of vehicle components during their installation and removal. An adjustable saddle sits atop a fixed column and base, providing high reach assistance for removing or installing vehicle components like transmissions, U-joints, radiators, driveshafts, exhaust systems, and catalytic converters. The adjustment rod features a bearing-mounted T-handle and 5 1/4 in. x 1 1/4 in. U-shape saddle. The OTC under hoist auxiliary stands are designed for rugged daily use by professionally trained vehicle technicians. They're available in standard and foot pedal assist models.
( 7 )
$164.99
—
$179.99
OTC Strut Tamer II Extreme spring compressors supply the strongest compression force—up to 4,000 lbs. to compress and rebuild large truck, SUV, and passenger car shock/strut assemblies. They also set a standard for safety, meeting the new ASME PASE safety standards for spring compressors. Safely compress the largest strut springs with OTC Strut Tamer II Extreme. They are available with or without stand. Features include: * Forged locking jaws includes larger pads and offset to clamp onto and compress springs even tighter than before * Extra-thick 5/8 in. compression arms for superior strength, stability, and safety * Locking trunions for optimal stability during spring compression * Arm-locking rings eliminate the need for tools to adjust * 2:1 reduction gearbox allows for a 2:1 torque compression increase when compressing struts * Spring capacity of 2 1/2 in. to 10 in. diameter; 1 1/4 in. to 24 in. vertical stroke * Stand with wheels for easy mobility in the shop (ST model only) * During compression, the stand's wheels lift off the floor, and four no-slip rubber pads keep the stand firmly in place
( 1 )
$1,534.99
—
$1,955.99
OTC Hub Grappler kits are the complete solution for servicing wheel hubs and bearings on the vehicle without removing the steering components or knuckle. They eliminate unnecessary alignments or the use of a shop press, cutting service time dramatically. OTC Hub Grappler kits include six adapters that increases application coverage, a tie rod/ball joint tool, and two Ford axle installers. Features include: * Hub Grappler puller is specifically designed to apply maximum force with minimal effort from an impact gun * The jaws are designed and sized to properly fit hub applications and can be quickly located on the puller bar without the use of fasteners * A 3/4 in. custom drive screw coupled with a special equalizer washer provides smooth operation while the proprietary heat-treating extends its life 5 to 10 times longer than similar designs
( 3 )
$896.99
—
$1,954.99
OTC glow plug bore reamers are specialty tools for select engines. They will ream bores for proper replacement of glow plugs—or, heating elements that warm incoming fuel and air to encourage efficient fuel combustion in a diesel engine. Order the reamer recommended for your engine application.
( 1 )
$177.99
OTC vacuum pressure gauge kits are ideal for testing vacuum lines and components. Quickly diagnose internal engine problems such as bad rings, valves, and leaking head gaskets. These OTC kits comes complete with the necessary adapters, dual scale gauge, and a carrying case.
( 43 )
$45.99
OTC 30-ton king pin presses include the heavy-duty kingpin and brake anchor pin pusher that utilizes its cylinder and hydraulic force to replace traditional time-consuming torch and hammer methods. They get the job done in minutes instead of the better part of a day. Five special collars and two pins allow OTC 30-ton king pin presses to work on both straight and tapered kingpins. Product features and items include: * Accommodates sizes from 7/8 in. to 2 in. diameter and up to 11 1/4 in. length * Capable of pushing out heavily corroded kingpins * Anchor pin can be removed quickly by using the special adapter installed in the pusher's base block with the unit positioned over the brake's spider * Hydraulic cylinder (4121A-MA) * 2-speed hand pump; 0.662 cu. in./stroke (4012A)
Not Yet Reviewed
$2,446.99
OTC universal belt tension gauges are used to check your drive belt tension and to ensure maximum belt and bearing life.
( 4 )
$26.99
—
$180.99
These OTC transmission and engine oil pressure kits can be used for domestic and import applications. The high and low-pressure gauges make these kits useful for both transmission and engine work. The kits come complete with adapters and can be used for both static and road testing. Additional features include: * Low-pressure gauge that reads 0-100 psi and 0-700 kPa * High-pressure gauge that reads 0-400 psi and 0-2,800 kPa * 13 adapters * Gauge and hose quick-disconnect adapters * Carrying case
( 14 )
$119.99
These OTC engine preluber kits ensure that oil is present in internal engine components on the first start of new or rebuilt engines. These OTC kits are used when it is necessary to prime the oil pump and fill the oil galleries and internal engine components with clean, new oil. They connect to the engine oil system at the oil pressure sensor on a variety of domestic and import engines.
Not Yet Reviewed
$373.99
OTC Hendrickson suspension bushing master kits for heavy-duty vehicles make pivot and D-pin bushing removal and installation easier tasks. Because the patented design allows the tool to be mounted to the suspension piece, the weight of the tool does not need to be held in place during operation. The kits also include centering adapters that align the tool and reduce the likelihood of bushing damage or improper installation. With the included OTC 25-ton cylinder, even bushings covered in road dirt and salt are easy to replace. These master kits feature an OTC Stinger Series air/hydraulic pump, with the needed hose and couplers to make it ready to use right out-of-the-box.
Not Yet Reviewed
$2,409.99
—
$2,531.99
Do you need a replacement switch for your hydraulic-controlled equipment? OTC manufactured switches are made from durable materials that can withstand the demands of today's work environments. These OTC switches include a 10 ft. cord and can be ordered for on-the-floor operation or a fixed mount.
Not Yet Reviewed
$519.99
OTC's RamRunner two-stage hydraulic pumps are designed to power hydraulic rams for tasks like frame straightening and wheel alignment in automotive and industrial settings. They provide a combination of high-flow at low-pressure for quick ram movement and high-pressure at low flow for applying force when needed. This dual-stage approach allows for efficient and fast operation, especially when working with large rams. Models are available with 2-position/2-way manual valve or 3-position/4-way manual valve, allowing for "advance," "hold," and "return" positions, providing precise control over the ram's movement. Select the OTC RamRunner two-stage hydraulic pump suited for your application needs. Product Overview: * These pumps can deliver up to 10,000 psi max pressure output * Commonly used in automotive repair, industrial maintenance, and construction for tasks like frame straightening, wheel alignment, and other applications requiring hydraulic power * The two-stage design optimizes both speed and force, leading to efficient and time-saving operation * Can be used with both single-acting and double-acting rams, offering flexibility in various applications * Many models come with a remote control cord for safe and convenient operation from a distance, depending on hydraulic pump model selected
Not Yet Reviewed
$2,926.99
—
$4,191.99
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
