OTC Tools & Kits

If you’re serious about automotive service equipment for your shop or garage, you need gear from OTC Tools, and Summit Racing has it all. OTC Tools is a major...

If you’re serious about automotive service equipment for your shop or garage, you need gear from OTC Tools, and Summit Racing has it all. OTC Tools is a major manufacturer of vehicle electronic diagnostic instruments, automotive service tools, shop equipment, and general-purpose tools. Mechanics around the world use OTC Tools to pinpoint problems in fuel, cooling, braking, and other electrical and hydraulic systems. They also turn to OTC for the specialized tools and kits needed to install and repair those systems.

Showing In Stock Items. Show All 101 Items.

Individual Parts

Part Groups

Results 1 - 24 of 86

OTC Hub Grappler Kits

OTC Hub Grappler kits are the complete solution for servicing wheel hubs and bearings on the vehicle without removing the steering components or knuckle. They eliminate unnecessary alignments or the use of a shop press, cutting service time dramatically. OTC Hub Grappler kits include six adapters that increases application coverage, a tie rod/ball joint tool, and two Ford axle installers. Features include: * Hub Grappler puller is specifically designed to apply maximum force with minimal effort from an impact gun * The jaws are designed and sized to properly fit hub applications and can be quickly located on the puller bar without the use of fasteners * A 3/4 in. custom drive screw coupled with a special equalizer washer provides smooth operation while the proprietary heat-treating extends its life 5 to 10 times longer than similar designs

3.67 out of 5 stars ( 3 )

$896.99

—

$1,954.99

OTC Bearing Cup Removers

Save time and frustration with these OTC bearing cup removers. OTC bearing cup removers make servicing hubs on small FWD vehicles much easier. They work great for pulling internal bearing cups, seals, and bushings.

5.0 out of 5 stars ( 6 )

$62.99

OTC Rear Axle Bearing Service Sets

OTC rear axle bearing service sets are designed to remove axle bearings from rear semi-floating differentials. The kits work with any 5/8-18 in. threaded slide hammers. Additional features include: * Small puller that fits 1 in. to 1 7/8 in. bearing tubes * Medium puller that fits 1 5/16 in. to 2 3/8 in. bearing tubes * Large puller that fits 1 3/8 in. to 2 7/8 in. bearing tubes * Storage case

4.93 out of 5 stars ( 15 )

$87.99

—

$200.99

OTC Pilot Bearing Pullers

OTC's versatile pullers are built specially for inside pulling jobs, and particularly for removing flywheel pilot bearings on automobiles, trucks, and tractors. This tool also works for pulling motors, generators, and magneto bearings.

4.5 out of 5 stars ( 8 )

$40.99

—

$90.99

OTC Wheel Bearing Removal and Installation Tools

OTC wheel bearing installation and removal kits work with standard wrenches to install and remove ¾ in., 1 in., and 25mm I.D. sealed wheel bearings. Each kit includes instructions and comes with a blow molded case for storage.

Not Yet Reviewed

$168.99

OTC Universal Bearing Cup Installers

OTC universal bearing cup installers are handy, adjustable tools designed to install wheel bearing cups in a wide range of heavy-duty axles. Simply adjust and lock the jaws to the cup I.D., slip on the new cup, set it in the bore, and drive it in with a hammer. These OTC tools help eliminate the damage caused by makeshift methods. They will work on axles with an 11,000 to 50,000 lb. capacity and will adjust to fit 3 5/8 in. to 6 1/2 in. O.D. bearing cups.

5.0 out of 5 stars ( 1 )

$314.99

OTC Twin Cam Inner Cam Bearing Remover and Installer Kits

OTC twin cam inner cam bearing remover/installer kits contain the tools necessary to complete the job without damage to the crankcase. The components of these kits are packaged in a sturdy case for easy storage and portability. OTC remover/installer kits feature: * Bearing puller designed to trap the needle bearings and keep them from falling into the crankcase * Installation tools are designed to press on the outer most diameter of the bearing, eliminating damage to the bearing, cam, or case * Press adapter will also set the bearing to its proper depth

4.5 out of 5 stars ( 4 )

$314.99

OTC Steering Neck Bearing Race Removers

Anything to trim some time off motorcycle repairs, right? Well, OTC steering neck bearing race removers are the simplest method you'll find to extract that part from the stem. Just insert the remover into the neck, and adjust the bolt to tighten snugly against the inside diameter. The remover is then driven from the other end of the neck to remove the race. Couldn't be easier!

4.38 out of 5 stars ( 21 )

$39.99

OTC Differential Side Bearing Pullers

These OTC differential side pullers will remove differential side carrier bearings on a wide variety of passenger cars and light trucks. OTC manufactures these pullers out of quality materials to ensure performance and dependability. They include the following parts: * Four step plate adapters to fit carrier bearings * Forcing screws/cross block assembly * Puller jaws/pins (set of two each) * Puller jaws retaining yoke * Step plate adapters (set of four)

4.58 out of 5 stars ( 19 )

$142.99

OTC 7-Ton Bar-Type Bearing Separator and Puller Sets

OTC Tools 7-Ton Bar-Type Bearing Separator and Puller Sets include a bearing splitter with 4 in. capacity, two sets of hex push puller legs, and an 8 in. bar-type puller head mated with a custom thread forcing screw. Service and maintenance professionals now have a puller/bearing set for tough jobs, up to 7-tons, larger applications, and greater reach 8 to 16 in. As a stand-alone puller/bearing splitter set or as a complement to the 4518 version, the 4517 7-Ton puller/bearing separator set gives your maintenance/service shop the expanded capability to keep more business in-house.

Not Yet Reviewed

$236.99

OTC FWD Bearing Cup Removers

These OTC bearing cup removers are great for servicing hubs on front-wheel drive cars. The cone design of the OTC bearing pullers holds the jaws in place, allowing for an easy removal. The OTC bearing cup removers are great for pulling internal bearings, cups, seals, and bushings.

Not Yet Reviewed

$166.99

OTC Bearing Splitters

These versatile OTC accessories feature "knife-like" edges, which are easily placed behind the part to secure a gripping surface, even when clearances are extremely limited. When used with an OTC Grip-O-Matic puller, the puller jaws grip the attachment's outer edge; when used with a push-puller, the puller legs are threaded into the attachment's two tapped holes. They come available in multiple spreads.

4.67 out of 5 stars ( 9 )

$93.99

—

$744.99

OTC Pilot Bearing Puller Attachments

OTC pilot bearing puller attachments will help you pull a pilot bearing from the end of the crankshaft. They feature interchangeable jaws and a reach minimum/maximum range of 3/16 in. to 1 in. One set of jaws covers a spread of 1/2 in. to 1 1/2 in. and the other set covers a spread of 3/8 in. to 1 3/8 in. The puller attaches to OTC and other slide hammers with a 5/8 in.-18 thread.

5.0 out of 5 stars ( 1 )

$46.99

OTC Steering Stem Bearing Installation Tools

It couldn't be easier! OTC steering stem bearing installation tools feature a strong drive tube and three size adapters. With these tools, you'll quickly attach or adjust the lower bearings on your motorcycle.

Not Yet Reviewed

$72.99

OTC Differential Bearing Pullers

These OTC differential pullers will remove differential bearings on a wide variety of passenger cars and light trucks. OTC manufactures these pullers out of quality materials to ensure performance and dependability.

Not Yet Reviewed

$88.99

OTC Hub and Bearing Housing Pullers

OTC hub and bearing housing puller removes stubborn hubs when nothing else will. These hub and bearing housing tools may separate the bearing, but the unique dual pattern design fits both the wheel hub and bearing housing, capable of applying 20 tons of force. These tools are quality-built from steel and have a black oxide finish to offer long-lasting service life. Have a tough job to do? Use the correct tools by OTC to get the job done.

3.0 out of 5 stars ( 1 )

$240.99

OTC Swingarm Pivot Bearing Pullers

OTC offers a long line of tools and equipment specifically for motorcycles and powersports projects. OTC swingarm pivot bearing pullers are essential tools for removing and installing pivot bearings in swing arms and front fenders. These motorcycle specialty tools will help to make your project go easier and finish successfully.

Not Yet Reviewed

$47.99

OTC Truck Transmission Bearing Service Kits

OTC truck transmission bearing service kits help you remove input shaft bearings and countershaft bearings, in both the main and auxiliary boxes of heavy-duty Fuller transmissions. They will also remove end yokes from 1600/1610 to 1810 Series transmissions. The OTC puller in these service kits delivers 10 tons of mechanical power--essential force for working on big gearboxes.

Not Yet Reviewed

$577.99

OTC Bearing Splitter Push-Puller Leg Sets

OTC's bearing splitter legs will give you extra length. They are made from durable materials to get the job done and come available in multiple lengths.

5.0 out of 5 stars ( 1 )

$54.99

—

$242.99

OTC 5-Ton Bar-Type Puller/Bearing Separator Sets

This OTC puller/bearing separator set includes the most popular bearing splitters and will cover a wide range of pulling jobs. The supplied OTC bearing separators can be use separately or in combination with other pullers or tools. Other items included in this OTC set includes the following: * Two and three inch bearing splitters * Four sets of hex push-puller legs * Bar type puller head with a 9/16 forcing screw

4.27 out of 5 stars ( 11 )

$153.99

OTC Hub Grappler Kit Replacement Components

OTC Hub Grappler is a complete solution for servicing wheel hubs and bearings on the vehicle, cutting service time dramatically. OTC also carries the components to keep your Hub Grappler complete and ready to work. OTC Hub Grappler kit replacement components will maintain the functionality and flexibility of your tool.

Not Yet Reviewed

$46.99

OTC Truck Brake Anchor Pin and Bushing Service Sets

OTC truck brake anchor pin and bushing service sets are less complicated and less time-consuming. With these sets, there is no need to remove the bearing hub assembly just to replace the pins and bushings on 16 1/2 in. S-cam trailer and tractor "Q" brake systems. The special tooling and OTC C-frame press gets you past the hub assembly, so you can do the job quickly and professionally without damaging other parts. Everything needed is included for removal and replacement. OTC truck brake anchor pin and bushing service sets include a C-frame press and tooling in a plastic storage case; however, tooling is available separately for the tech who already owns the 7248 C-frame press.

5.0 out of 5 stars ( 1 )

$360.99

OTC Step Plate Adapters

OTC step plate adapters are necessary for pulling and installing bearings, gears, or other parts found on hollow shafts or housings. They may be used with Grip-O-Matic pullers and push-pullers, as well as shop presses. OTC step plate adapters are available individually and in sets of six or 11 assorted sizes. OTC 6-piece step plate adapter set: Diameter: A is 2 5/8 in. and B is 2 1/8 in. Diameter: A is 2 3/4 in. and B is 2 1/4 in. Diameter: A is 2 7/8 in. and B is 2 3/8 in. Diameter: A is 3 in. and B is 2 1/2 in. Diameter: A is 3 1/4 in. and B is 2 3/4 in. Diameter: A is 3 1/2 and B is 3 in. OTC 11-piece step plate adapter set: Diameter: A is 1 in. and B is 3/4 in. Diameter: A is 1 1/8 in. and B is 7/8 in. Diameter: A is 1 1/4 in. and B is 1 in. Diameter: A is 1 3/8 in. and B is 1 1/8 in. Diameter: A is 1 5/8 in. and B is 1 1/4 in. Diameter: A is 1 3/4 in. and B is 1 3/8 in. Diameter: A is 1 7/8 in. and B is 1 1/2 in. Diameter: A is 2 in. and B is 1 5/8 in. Diameter: A is 2 1/8 in. and B is 1 3/4 in. Diameter: A is 2 3/8 in. and B is 1 7/8 in. Diameter: A is 2 1/2 in. and B is 2 in.

Not Yet Reviewed

$100.99

—

$172.99

OTC Tubular Spanner Wrenches

OTC offers 6-lug, tubular spanner-type wrenches to remove and install rear wheel bearing locknuts. They're built for use with a 3/4 in. square-drive ratchet or breaker bar. These tools are ideal for servicing Chevrolet and GMC 11,000 to 13,500 lb. axles. The socket O.D. is 2 7/8 in.

Not Yet Reviewed

$63.99

—

$75.99

Page 1 of 4
Next