Availability
OTC Strut Tamer II Extreme spring compressors supply the strongest compression force—up to 4,000 lbs. to compress and rebuild large truck, SUV, and passenger car shock/strut assemblies. They also set a standard for safety, meeting the new ASME PASE safety standards for spring compressors. Safely compress the largest strut springs with OTC Strut Tamer II Extreme. They are available with or without stand. Features include: * Forged locking jaws includes larger pads and offset to clamp onto and compress springs even tighter than before * Extra-thick 5/8 in. compression arms for superior strength, stability, and safety * Locking trunions for optimal stability during spring compression * Arm-locking rings eliminate the need for tools to adjust * 2:1 reduction gearbox allows for a 2:1 torque compression increase when compressing struts * Spring capacity of 2 1/2 in. to 10 in. diameter; 1 1/4 in. to 24 in. vertical stroke * Stand with wheels for easy mobility in the shop (ST model only) * During compression, the stand's wheels lift off the floor, and four no-slip rubber pads keep the stand firmly in place
( 1 )
$1,539.99
—
$1,898.99
OTC Hub Grappler kits are the complete solution for servicing wheel hubs and bearings on the vehicle without removing the steering components or knuckle. They eliminate unnecessary alignments or the use of a shop press, cutting service time dramatically. OTC Hub Grappler kits include six adapters that increases application coverage, a tie rod/ball joint tool, and two Ford axle installers. Features include: * Hub Grappler puller is specifically designed to apply maximum force with minimal effort from an impact gun * The jaws are designed and sized to properly fit hub applications and can be quickly located on the puller bar without the use of fasteners * A 3/4 in. custom drive screw coupled with a special equalizer washer provides smooth operation while the proprietary heat-treating extends its life 5 to 10 times longer than similar designs
( 3 )
$1,954.99
OTC's 25-ton capacity ram with half coupler are commonly used in shop presses, for tasks like pressing rear axle bearings and piston pins, as well as for bending, straightening, and other maintenance operations. The hydraulic cylinder is used to apply force in various applications, particularly in situations requiring pushing, pulling, or lifting heavy loads. Product Overview: * Designed for applications where space is limited, and offers increased efficiency to handle tasks that would be difficult or impossible manually * Hydraulic operation—uses hydraulic pressure for powerful and controlled force application * Commonly used in shop presses to apply force for pressing, bending, and straightening, handles a wide range of heavy-duty applications like pressing rear axle bearings, straightening frames, or correcting rear housings and axles * Also useful in various maintenance and repair tasks where controlled force is needed * 25-Ton capacity—indicates the maximum force the ram can exert * Half coupler allows for connection to other hydraulic components or attachments * Threaded ram collar and base facilitates easy mounting connection to other equipment
Not Yet Reviewed
$1,734.99
OTC engine load levelers are designed to hook to a crane or hoist to handle and position large pieces. OTC engine load levelers can be adjusted to compensate for off-center loads or be adjusted horizontally.
( 27 )
$1,958.99
OTC push-pull sets are manufactured out of quality materials and are built to handle a wide range of pulling jobs. These OTC push-pull sets can be used with OTC internal pulling attachments and are available in multiple weight capacities.
( 1 )
$1,619.99
OTC 13-ton capacity puller sets are true all-makes/models puller sets with 13 tons of force. They feature 11 pullers, three bearing splitters, and nearly a dozen threaded adapters to help you easily pull gears, bearings, shafts, pinions, outer races, and more. Whether you are pulling something off a shaft, pulling something out of a hole, or pulling a shaft out of something, OTC 13-ton capacity puller sets have everything you need to separate rusted, frozen, or seized components. OTC kits include: * Push-puller with 6 3/4 in. legs to remove and install press-fit parts * 15 3/4 in. legs for pusher-puller * Grip-O-Matic 2-ton 2-jaw puller * Grip-O-Matic 5-ton 2-jaw puller * Grip-O-Matic 7-ton 2-jaw puller * Grip-O-Matic 13-ton 2-jaw puller * Gear and pulley puller * Flange-type puller * Steering wheel puller * Pilot bearing puller * Slide hammer puller * Pitman arm puller * Step plate adapter set * Internal threaded adapters: 1/2 in.-20 x 5/8 in.-18 * Internal threaded adapter set * Bearing cup pulling attachment * Bearing splitter with maximum spread of 15/16 in. * Bearing splitter with maximum spread of 2 in. * Bearing splitter with maximum spread of 4 5/8 in. * Bearing splitters are to be used with pusher-puller or Grip-O-Matic pullers
Not Yet Reviewed
$1,509.99
These OTC strong box puller sets are the most versatile pullers that your garage or shop will ever need. These OTC pullers enable you to pull gears, bearings, pulleys, wheels, and more on cars and light trucks. In these sets, you get eight pullers, five attachments, and extra puller jaws. All of these tools are contained in a rugged, lockable metal storage cabinet.
Not Yet Reviewed
$1,512.99
OTC truck dual wheel dollies remove, transport, and replace dual wheel and tire assemblies without strain or struggle. Features: * 1,500 lb. capacity * Swivel casters, 3 1/2 in. front and 3 in. rear, provide easy maneuverability * Floor space is 43 in. by 42 in. * Hydraulic jack provides over 6 1/2 in. of lift and tilts wheel assembly 7 degrees to prevent damage to wheel seal * 6 ft. support chain to hold load in place
Not Yet Reviewed
$2,003.99
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
