Availability
These OTC 6,000 lb. capacity revolver stands will handle the heaviest of engines. OTC designed these stands with a 96:1 ratio worm gear set, and the crank handle can be locked in any position. Their integral 12-ton jack raises the work to provide the swing radius needed for clearance.
Not Yet Reviewed
$8,838.99
OTC Strut Tamer II Extreme spring compressors supply the strongest compression force—up to 4,000 lbs. to compress and rebuild large truck, SUV, and passenger car shock/strut assemblies. They also set a standard for safety, meeting the new ASME PASE safety standards for spring compressors. Safely compress the largest strut springs with OTC Strut Tamer II Extreme. They are available with or without stand. Features include: * Forged locking jaws includes larger pads and offset to clamp onto and compress springs even tighter than before * Extra-thick 5/8 in. compression arms for superior strength, stability, and safety * Locking trunions for optimal stability during spring compression * Arm-locking rings eliminate the need for tools to adjust * 2:1 reduction gearbox allows for a 2:1 torque compression increase when compressing struts * Spring capacity of 2 1/2 in. to 10 in. diameter; 1 1/4 in. to 24 in. vertical stroke * Stand with wheels for easy mobility in the shop (ST model only) * During compression, the stand's wheels lift off the floor, and four no-slip rubber pads keep the stand firmly in place
( 1 )
$1,539.99
—
$1,898.99
OTC 4,000 lb. folding floor cranes are sturdy steel units that fold up neatly for compact storage. They feature 3 1/2 in. front wheels, 5 7/8 in. rear casters, and a reach of 25 in. to 46 in. OTC 4,000 lb. folding floor cranes are great for small shops and garages.
( 1 )
$1,168.99
These OTC motorcycle and ATV lift jacks will make it much easier to work in the garage. By allowing the handle to be lowered, the user will be able to walk around the lift. These low-profile OTC jacks are perfect for motorcycles with ground clearance issues. Additional features include: * 1,500 lb. capacity * Large 17 in. long skids * Foot pedal release * Locking rear casters * Automatic safety locks * Two ratcheting tie straps for safety
( 20 )
$431.99
OTC Hendrickson suspension bushing master kits for heavy-duty vehicles make pivot and D-pin bushing removal and installation easier tasks. Because the patented design allows the tool to be mounted to the suspension piece, the weight of the tool does not need to be held in place during operation. The kits also include centering adapters that align the tool and reduce the likelihood of bushing damage or improper installation. With the included OTC 25-ton cylinder, even bushings covered in road dirt and salt are easy to replace. These master kits feature an OTC Stinger Series air/hydraulic pump, with the needed hose and couplers to make it ready to use right out-of-the-box.
Not Yet Reviewed
$2,409.99
—
$2,554.99
OTC 1,250 lb. capacity Powertrain lifts are ideal for engine and transaxle service. They offer your shop a compact design with swivel casters for easy maneuverability. OTC 1,250 lb. capacity Powertrain lifts are air/hydraulic operation and come with a 20.5 in. x 30.5 in. tilting plate and a height range of 29 1/2 in. to 68 1/2 in.
( 1 )
$3,524.99
OTC Hub Grappler kits are the complete solution for servicing wheel hubs and bearings on the vehicle without removing the steering components or knuckle. They eliminate unnecessary alignments or the use of a shop press, cutting service time dramatically. OTC Hub Grappler kits include six adapters that increases application coverage, a tie rod/ball joint tool, and two Ford axle installers. Features include: * Hub Grappler puller is specifically designed to apply maximum force with minimal effort from an impact gun * The jaws are designed and sized to properly fit hub applications and can be quickly located on the puller bar without the use of fasteners * A 3/4 in. custom drive screw coupled with a special equalizer washer provides smooth operation while the proprietary heat-treating extends its life 5 to 10 times longer than similar designs
( 3 )
$896.99
—
$1,954.99
OTC's heavy-duty engine hoist, model 1819, offers several benefits including increased efficiency, reduced risk of injury, and improved productivity. The heavy-duty engine hoist allows for quick and easy lifting and moving heavy loads like engines, transmissions, and other bulky components, making it a valuable tool for mechanics and technicians. By minimizing the need for manual lifting, the crane also helps reduce risk of back injuries and other strain-related issues. Roller bearing wheels and a steering dolly offer easy movement and precise positioning of the crane. Product features: * Heavy-duty construction and precision engineering ensure long-lasting performance and reliability * Can be used for various tasks beyond engine removal, including lifting transmissions, axles, and other heavy components * The hoist has a 2,200 lb. capacity with the boom retracted and 1,650 lb. capacity with the boom extended * Telescoping boom extension and adjustable leg spread allow for versatile positioning and access to different areas * Equipped with 2-speed hydraulic hand pump * 16 7/8 in. lifting chain * Engine hoist * Space-saving fold-away feature for storage
Not Yet Reviewed
$5,869.99
OTC Revolver engine stand adapter plates are available for a long list of engines from Detroit Diesel to Volvo. Many of these steel plates will require the universal adapter assembly for mounting individual plates to your OTC Revolver engine stand. Choose the plate(s) for the engine(s) your work on.
( 2 )
$806.99
—
$1,269.99
Stop searching for makeshift solutions for servicing vehicles equipped with press-in ball joints--everything required is laid out in these ball joint master kits by OTC Tools. With kits of this magnitude, finding the correct adapters and using them correctly is key to minimizing service time. These complete kits consist of 70+ adapters, a C-frame, and a guide that contains application charts and diagrams with step-by-step instructions.
Not Yet Reviewed
$1,332.99
OTC's transmission adapter kits allow the user to utilize the engine stand. OTC transmission adapter kits replace the adjustable arms of the stand to hold and position the transmission at workbench height. The transmission is held with three sides fully exposed and can be rotated 360 degrees for an easy repair.
( 9 )
$1,232.99
OTC engine stands are made from heavy-duty materials designed for servicing light truck and car engines. These engine stands have four adjustable mounts to fit most engine blocks and they make work easy with a 24 in. handle to rotate your engine 360 degrees. Fixed polyurethane back wheels and poly swivel castors on the front allow for smooth travel around the garage.
( 1 )
$744.99
OTC Jeep/truck ball joint sets come with a complete set of adapters and special large C-frame to remove and install ball joints on many Chrysler/Dodge light-duty trucks, as well as Jeep Cherokee, Grand Cherokee, Wrangler, and Liberty vehicles. The high-clearance C-frame allows for the repair of the most recent vehicles, and each set is enclosed in a blow-molded case with application chart and instructions.
( 6 )
$652.99
OTC's tubular engine supports bars are made from high-quality steel and rubber padded legs to give more stability and ensure a long life. OTC includes two 36 in. chain assemblies and two hook assemblies.
( 7 )
$254.99
OTC engine load levelers are designed to hook to a crane or hoist to handle and position large pieces. OTC engine load levelers can be adjusted to compensate for off-center loads or be adjusted horizontally.
( 27 )
$1,958.99
—
$2,799.99
OTC service floor jacks have built-in safety overload to prevent over utilization beyond the jack's rated capacity. They also feature a convenient foot pedal to speed the lifting operation, with a handle lock and release control located on top of the handle. The spring-loaded handle can be locked into any position from vertical to horizontal. Cycle tested design for a long life of professional duty. Offered in 5, 10, or 20-ton with or without air-assist OTC service floor jacks out muscle all others.
Not Yet Reviewed
$4,694.99
OTC's air-assisted high-lift transmission jacks are perfect for those applications with a clearance problem--the low height of these jacks is 41.500 in. The jacks have a weight capacity of one full ton, and are designed with a metered foot-operated air pump. This allows each transmission to be effortlessly lifted into place, precisely controlling the load during removal and installation. A safety bypass prevents damage caused by a system overload.
Not Yet Reviewed
$4,242.99
OTC DPF cleaner replacement filter cartridges ensure that the cleaning process of your Diesel Particulate Filter cleaning units remain effective. Each new filter cartridge includes a Bag-out kit with plastic bag, cinch strap, and cable tie to remove and dispose of used filters. Replacing cartridges should be part of your unit's regular maintenance. To get the best service from your DPF cleaner replace filters with genuine OTC filter cartridges.
Not Yet Reviewed
$449.99
OTC 100-ton capacity heavy-duty shop presses are designed for a wide range of industrial and automotive applications, primarily for pressing, bending, and straightening metal components. Their high capacity allows them to handle large and heavy parts found in truck, construction, and agricultural equipment. OTC Tools offers these 100-ton heavy-duty shop presses in several versions, each model type listed below states specific features (per model). Please specify which OTC 100-ton heavy-duty shop press model you're interested in purchasing when placing order. Specific features of 100-ton heavy-duty shop presses (per model): * OTC No. 1857 model: includes single-acting ram with 10 in. stroke, hydraulic hand pump, gauge, hose and pump mounting bracket * OTC No. 1858 model: has all the same great features as their No. 1857 model, except has double-acting ram with 13 in. stroke, 3-phase, 220 V, 3,450 rpm electric/hydraulic pump and two hoses * OTC No. 1858-1P model: same as OTC Tools No. 1858 model, except it has a 2-stage, 1-phase hydraulic pump Featured highlights (per model): * 100-ton capacity allows handing large and heavy components * Designed for durability and to withstand full capacity loads * Wide openings between uprights allow for easy positioning of parts for pressing, bending and straightening metal components * Ram head glides smoothly on rollers for easy horizontal adjustments * Rugged press frame will withstand a full capacity load with the ram head in any position across the upper bolster * High capacity and adjustable bolster allows for a variety of maintenance and repair tasks in various industries * Depending on model selected, some feature a remote pump for easier operation and better visibility during pressing operation
( 2 )
$15,146.99
—
$25,009.99
OTC's Powertrain lifts feature a sliding split tabletop design that allows for separation of engine and transmission assembly or hybrid engine/generator module, making service easier. The lifts unique design also helps handle removal and installation of electric vehicle batteries, fuel tanks, suspension systems and other powertrain assemblies. A generous ground clearance allows for floor crane access, while a low collapsed height aids in servicing large components while still on the lift. The table is designed to tilt to help properly align components to the vehicle during installation and the threaded holes in the tabletop will accommodate future adapters and powertrains.
Not Yet Reviewed
$8,530.99
OTC 22-ton under-axle jacks bring the versatility of air-assist operation to your shop's lifting tasks. A self-retracting, spring return feature with 49 1/2 in. long T-handle lets you easily position the jack under vehicles with long overhangs. One pull of the handle activates the self-retracting 22-ton capacity ram without having to crawl underneath the vehicle. Large rubber-tired steel wheels facilitate maneuverability on most types of terrain. The 3/4 in., 1 15/16 in., and 3 7/8 in. included saddle attachments are for multiple height adjustments based on the vehicle being lifted. OTC 22-ton under-axle jacks are ideal for lifting heavy-duty vehicles.
Not Yet Reviewed
$1,026.99
OTC's 25-ton capacity ram with half coupler are commonly used in shop presses, for tasks like pressing rear axle bearings and piston pins, as well as for bending, straightening, and other maintenance operations. The hydraulic cylinder is used to apply force in various applications, particularly in situations requiring pushing, pulling, or lifting heavy loads. Product Overview: * Designed for applications where space is limited, and offers increased efficiency to handle tasks that would be difficult or impossible manually * Hydraulic operation—uses hydraulic pressure for powerful and controlled force application * Commonly used in shop presses to apply force for pressing, bending, and straightening, handles a wide range of heavy-duty applications like pressing rear axle bearings, straightening frames, or correcting rear housings and axles * Also useful in various maintenance and repair tasks where controlled force is needed * 25-Ton capacity—indicates the maximum force the ram can exert * Half coupler allows for connection to other hydraulic components or attachments * Threaded ram collar and base facilitates easy mounting connection to other equipment
Not Yet Reviewed
$1,734.99
Replace rusted and frozen heavy-duty suspension bushings faster and easier with the OTC Hendrickson rear suspension bushing tool kits. These suspension bushing tools are for use on heavy-duty vehicles to make Pivot and D-pin bushing removal and installation easier tasks. The tools patented design allows it to be mounted to the suspension piece, the weight of the tool does not need to be held in place during operation. Also included in these kits are centering adapters that align the bushing tool and reduce the likelihood of bushing damage or improper installation. Product features: * Patent-pending design is suspension-mounted, eliminating the need to hold the tool during operation * Remove and install Hendrickson Primaax EX, Comfort Air, FCCC V RideTM Pivot and D-Pin bushings * Saves time and effort during suspension service to get trucks back on the road faster * The included adapters align tool with the suspension to ensure proper bushing installation and reduce the chance of misalignment and bushing damage * Includes an OTC's 25-ton single acting cylinder
Not Yet Reviewed
$2,109.99
OTC collision repair sets are competitively priced, professional-quality repair sets that are must-haves for any body man. These high-quality sets include a single-speed hydraulic hand pump, extension tubes, a hose, and Ram. OTC collision repair sets' couplers are interchangeable with leading manufacturers' units. The components snap together for quick setups to apply pushing, spreading, or pulling force. A sturdy plastic case is included for convenient storage and transport.
Not Yet Reviewed
$1,366.99
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
