Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
Availability
OTC U-joint Removing/Installing Tools
OTC's screw press is used to remove and replace automotive universal joints with needle bearings, including GM plastic pin CV U-joints. The OTC press can also be used to replace truck brake anchor pins.
( 12 )
$137.99
—
$226.99
OTC Ford Spark Plug Remover Kits
OTC Ford spark plug removers are a great solution to a common problem—broken plugs. With the corrosion way down inside and your wrench on top ... POP! You now have pieces of a plug instead of one complete plug. If you'd been using OTC's Ford spark plug removal kit, the scenario would be different. The unique design of these tools locks the porcelain core to the plug hex and turns it as one complete unit. Plus, device will also pull the porcelain core if only the plug hex has been removed. Either way, it's a win-win situation for you. Maximize your tune-up success rate with OTC Tools Ford spark plug removers.
( 7 )
$120.99
OTC Water Pump Pulley Remover/Installer Kits
OTC water pump pulley remover/installer kits provide you with the tools to make your job less of a hassle. They will help remove and install water pump pulleys faster and easier on specific Ford, Lincoln, and Mercury 3.0L DOHC engines. Kits include: * Forcing screw with shaft protector and cross block puller * Pulley removal plate * Two hex head cap screws and washers * Forcing screw with a special nut for installing
( 1 )
$152.99
OTC Heavy-Duty Tie Rod and Ball Joint Removers
OTC heavy-duty tie rod and ball joint removers are universal pulling tools that are effective for use on a wide range of cars, trucks, SUVs, and heavy-duty vehicles. These tools will also remove pitman arms and can be used in many pulling situations that require a 2-jaw puller on other vehicle types and machinery. Additional features: * 10-ton pulling capacity * 3 in. spread and 4 in. reach on the jaws * 3/4 in. live center forcing screw * Cone, flat, and cup style interchangeable tips included
( 2 )
$165.99
OTC Extension Housing Bushing Removers
Removing the extension housing bushing just got a little easier with the OTC extension housing bushing remover. The tool is inserted through the bushing and the drive screw is tightened to draw the bushing out of the housing.
( 1 )
$176.99
OTC 33-Piece Master Bushing Drive Sets
OTC Tools 33-piece Master Bushing Drive sets enable you to remove and install bushings ranging from 10mm to 42mm in diameter, and 3/8 in. to 1 3/8 in. in diameter, as used on vehicles, import cars, trucks, tractors, construction equipment, electric motors, and many other components having bushings. Kit features and parts: * Steel construction * Includes large, medium, and small driver handles and adapters * All kit components are housed in a blow-molded storage case
( 1 )
$100.99
OTC Injector Rail Assembly Removers
OTC injector rail assembly removers are used for removal of the direct injection fuel rail without damaging the unit. The rail assembly must be removed as straight as possible to prevent damaging an injector bore in the cylinder head or the mount assembly. OTC injector rail assembly removers include the remover, stud adapter, and L-hook and are specific to 2007-14 General Motors Direct Injection engines.
Not Yet Reviewed
$192.99
OTC Heavy-Duty Transmission Output Shaft End Yoke Removers
OTC transmission output shaft end yoke removers are one of the specialty tools you may not need every day, but when you do need one, you'll be glad to have it in your tool arsenal. Their heavy-duty construction offers a long service life to properly remove driveshaft yokes.
( 2 )
$129.99
OTC Stinger Multipurpose Bearing and Pulley Puller Sets
Protect your bearings and pulleys from abuse with an OTC Stinger multipurpose bearing and pulley puller sets. These OTC puller sets are perfect for a wide range of pulling jobs, including: bearings, alternators, generators, power steering and crankshaft pulleys, timing gears, and harmonic balancers. The spread reach is from 3.000 to 5.000 inches. These OTC sets include the following contents: * 2 – forcing screws (live center): 3/4"-16 x 6-11/16" and 3/4"-16 x 5" * 2 – cross-bar yokes: 3 pin-hole @ 3-1/4" to 5-1/2", 2 pin-hole @ 2-3/8" to 3-3/8" * 2 – clamp bolts * 3 – pairs of puller Jaws: 1-3/8" Max, 1-5/8" Max, 1-3/4" Max * 1 – pair of jaw pins with ball spring * 3 – pairs of capped bolts * Housed in a blow-molded plastic storage case
Not Yet Reviewed
$179.99
OTC Injector Seal Installer and Sizer Adapters
OTC injector seal installer and sizer adapters ensure replacement injectors and seals are installed correctly. Two different kits are available. Choose the appropriate one for your application. OTC kit 6757 installs the PTFE seal onto the end of the injector. The pilot cone is placed onto the end of the injector and the seal is started over the cone. The installer pushes the seal into the groove on the injector tip. The sizer goes over the seal to compress it back to the correct O.D. to allow installation into the cylinder head. OTC kit 6756 installs the dual seals onto the end of the injector. These seals must be installed into their grooves, and then sized to the engineered dimension before the injectors are installed into their bores in the cylinder head. Two seal installation pilots for each groove, a seal installer driver, and a compression sizer is included.
Not Yet Reviewed
$158.99
—
$179.99
OTC Navistar Injector Sleeve Remover/Installer Tools
OTC Navistar injector sleeve remover/installer tools is a 2-piece set that helps you easily remove and install injector sleeves on Navistar diesel engines. The threaded remover fits onto your slide hammer to pull out damaged sleeves and the installer properly seats new sleeves in the cylinder head.
Not Yet Reviewed
$111.99
OTC Ford Injector Remover/ Installer Kits
These OTC Ford injector remover and installer kits remove and install fuel injectors without damaging the injector or cylinder head. OTC manufactures these kits to accept a standard 3/8 in. drive.
( 5 )
$166.99
—
$229.99
OTC Injector Retaining Clip Replacers
OTC injector retaining clip replacers ensure proper retention of the injector to the rail. These plier-type tools remove and install the injector retaining clips without over-spreading. For specialty GM service tools, OTC's lineup includes over 40 tools that will make maintenance and repairs easier.
Not Yet Reviewed
$174.99
OTC GM Duramax Injector Pullers
OTC GM Duramax injector pullers make servicing your injectors easier than ever. With every diesel vehicle, service is important to keep them running strong and getting the fuel economy that you demand. OTC came through for your GM Duramax with their injector pullers. Simply install on the injector that needs to be pulled, use a box end wrench to turn the tool until the injector releases from the seat. It does not get much simpler than that.
( 3 )
$183.99
OTC Fuel Injector Nozzle Pullers
These OTC fuel injector nozzle pullers make servicing your 6.9L and 7.3L engines less frustrating. The supplied slide hammer gives an even, straight pull on the nozzle for fast, easy removal. The OTC puller nut screws onto the injector nozzle on the inlet port.
( 1 )
$142.99
OTC 7-Ton Four In One Puller Sets
These OTC four-in-one puller sets can quickly assemble a standard or long-reach 2/3 jaw puller. With a 7-ton capacity, these sets have a maximum reach of 8.750 in. and a maximum spread of 11.000 in. These versatile pullers are ideal for many pulling jobs.
Not Yet Reviewed
$232.99
OTC Heavy-Duty Gear Pullers
OTC heavy-duty gear pullers will remove gears up to 7 1/4 in. in diameter, including most cam gears. Rated at 8 tons, these puller tools are stout enough for almost any HD application—and include a pair of metric bolts for most applications. The slimmer design of the cross block gives more room to set up in tight quarters. The tempered steel, rust inhibitor-coated bolts are graded 10.9 and are sized M12 x 1.75 in. and are 90mm in length.
Not Yet Reviewed
$155.99
OTC Heavy-Duty Truck Hub Cap Installers
OTC hub cap installers are the solution to safely adding chrome caps to heavy-duty trucks. Over-the-road tractor hubcaps can be difficult to install. These high-density polyethylene tools guide the cap into place over the axle nuts—without damage.
Not Yet Reviewed
$148.99
OTC Cone Type Pullers
OTC's cone type puller will work on both internal and external jobs. The two and three way head permits assembly of the puller to suit the job at hand.
Not Yet Reviewed
$140.99
—
$200.99
OTC Mechanical Grip-O-Matic Pullers
OTC offers the most complete line of pullers allowing you to get the job done in a timely fashion. OTC's pullers are forged from quality steel and subjected to rigorous tests which exceed their rated capacity. Available in multiple sizes.
( 4 )
$113.99
—
$184.99
OTC Brake Drum and Rotor Removers
Seized-up rotors and drums are a common problem--and OTC has multiple solutions with its line of brake drum and rotor removers. The basic style tools thread into the drum holes, then are tightened to free the drum from the hub. This type of remover works especially well with Mercury Villager vans and many import vehicles. For more heavy-duty jobs, you may want to order the puller which easily handles rotors and drums, as well as drive wheels, flywheels, pulleys, and gears. Simply set the jaws in place and tighten the center bolt, either manually or with a power/air tool. Users rave about the ease and efficiency of these units! OTC brake drum and rotor removers transform a rusty, time-consuming headache into a one-man job that takes mere minutes.
( 26 )
$159.99
OTC Steering Wheel Removal Sets
OTC steering wheel removal sets are designed to help you extract the wheel from most of modern vehicles. The puller sets include a variety of steel components to assist in the removal. Everything is packaged in a high-quality storage case. These sets are suitable for professionals or everyday gearheads.
( 2 )
$171.99
OTC Front Hub Removers
OTC hub removers will save you time and frustration. These universal OTC hub removers service most FWD hubs on cars without damaging the wheel bearings. The hub removers push the axle shaft from the front hub.
( 8 )
$190.99
Clearance
OTC Crankshaft Rear Seal Wear Ring Removers
Save time on your project with OTC crankshaft rear seal wear ring removers. These assemblies easily pull the ring out, saving you from any unnecessary effort.
Not Yet Reviewed
$385.99
$231.50
