Availability
OER offers replacement power steering control valves for classic cars and trucks equipped with original power-assist power steering. These OE reproductions are also machined from cast iron—and feature the correct threaded ports for pressure and return lines. Each control valve includes the pivot ball and stud, the pivot ball dust boot with retainer, and grease fitting. Order the model recommended for your application.
( 9 )
$185.99
OER engine mounting brackets are accurate reproductions of the factory originals. They are correct in appearance and are manufactured from stamped steel in OE thicknesses. OER engine mounting brackets provide the proper fit and look on a variety of applications.
( 77 )
$36.99
OER rear multi-leaf spring installation kits have everything you need to mount your rear leaf springs. Most kits include a rear shackle kit, upper and lower spring mounting pads, spring eyebolts and nuts, spring eye bracket bolts and clip nuts, U-bolts, and T-bolts.
( 50 )
$139.99
OER rear leaf springs are quality reproductions of the original designed to exact specifications to ensure the correct fit, form, and function. These leaf springs are available in applications to fit different make and model vehicles.
( 52 )
$571.99
—
$691.99
These OER reproduction body mount bushings are designed to replace original, worn-out subframe body mounts on your classic car. Replacing the original bushings with these durable rubber reproductions is a sure way to retain originality and mount the body exactly the way the factory intended. Each bushing is designed and manufactured to replicate the original in every detail, and each mount is produced using correct, compression-molded S.B.R. with steel inserts where required.
( 5 )
$9.99
—
$249.99
OER Original Equipment Reproduction manufactures authentic products for the restoration industry, and their line of Authorized control arms meet or exceed stringent OER quality control standards, ensuring the best quality and fit for your classic vehicle. OER Authorized 1955-57 Chevy full size lower control arms offer original style with pre-installed bushings, shafts, and ball joints. If your classic's current suspension rattles or makes noise when turning or going over bumps, it may be time to restore your suspension with OER Authorized control arms.
( 1 )
$324.99
OER GM upgrade control arms are designed to replace the original control arms and enhance the handling performance of your classic GM vehicle. These arms are not only stronger and lighter weight than the factory arms, but they also feature improved suspension geometry. This improved geometry improves the feel and handling performance of your ride. Update the suspension of your classic car and enjoy the improved handling that these OER control arms offer.
( 2 )
$282.99
—
$311.99
OER Original Equipment Reproduction manufactures authentic products for the restoration industry, and their line of Authorized control arms meet or exceed stringent OER quality control standards, ensuring the best quality and fit for your classic vehicle. OER Authorized 1971-87 Chevy/GMC truck lower control arms come with rubber bushings, cross shafts, and ball joints pre-installed. They are manufactured from steel and powdercoated black for a stock appearance. Restore your classic's suspension with OER Authorized control arms.
( 1 )
$540.99
OER steering couplers are designed to replace damaged, bent, or worn-out OEM rag joint couplers. They feature steel construction and stock mounting positions for an easy installation. Available for many vehicle applications, OER steering couplers provide steering performance that you can count on.
( 57 )
$33.79
—
$36.79
OER Original Equipment Reproduction manufactures authentic products for the restoration industry, and their line of Authorized control arms meet or exceed stringent OER quality control standards, ensuring the best quality and fit for your classic vehicle. OER Authorized 1967-74 GM F/X-body upper control arms are reproductions of the original-style arms designed for various GM models. They include pre-installed bushings, shafts, and ball joints. Restore your classic's suspension with OER Authorized control arms.
Not Yet Reviewed
$256.99
OER Original Equipment Reproduction manufactures authentic products for the restoration industry, and their line of Authorized control arms meet or exceed stringent OER quality control standards, ensuring the best quality and fit for your classic vehicle. OER Authorized 1967-74 GM F/X-body lower control arms are reproductions of the original-style arms designed for various GM models. They include pre-installed bushings, shafts, and ball joints. Restore your classic's suspension with OER Authorized control arms.
( 1 )
$279.99
OER center drag links are accurate reproductions of the factory original links. They are made to meet or exceed OE standards to ensure proper operation. OER center drag links come ready to install, right out of the box!
( 25 )
$69.99
—
$154.99
Equip your classic vehicle with GM Restoration Parts upper and lower leaf spring pads from OER. These OER original-quality reproductions are specifically manufactured to fit 1967-81 Camaro and Firebird models. Each pad is used to insulate the area between the rear leaf spring and the axle tube mounting plate. Two upper pads and two lower pads are required per vehicle, and if you're converting a 1967-69 single to a multi-leaf application, it will be necessary to install the multi-leaf spring pads.
( 12 )
$10.99
—
$13.99
OER steering column bearings can eliminate vibration and rotating resistance. Designed to offer support to the steering shaft, these bearings press into the bottom of the steering column tube; then the shaft runs through it. Order the factory recommended replacement to fit your application.
( 9 )
$29.99
—
$66.99
Whether you're swapping or replacing, OER transmission crossmembers for your TH400 are original equipment reproductions that you know will fit. These durable steel pieces are EDP coated for corrosion resistance. Whether you're wanting to install a TH400 in an original Powerglide or TH350 equipped Camaro, or replacing a broken or missing original, OER transmission crossmembers supply the quality that you demand at a price that's affordable.
( 25 )
$76.99
—
$92.99
OER leaf spring mounting brackets are designed to securely mount your factory or aftermarket leaf springs. They're manufactured from stamped steel and bolt into the stock location. The replacement brackets are available for either mono or multi-leaf style rear leaf springs. Order the model recommended for your vehicle application.
( 36 )
$33.99
—
$45.79
OER leaf spring shackle sets are top-quality reproductions of the factory original shackles. Each set includes bushings, plates, bolts, and nuts for multi-leaf or mono-leaf springs.
( 13 )
$28.99
—
$50.79
OER Authorized disc brake drop spindles are available for a wide variety of classic GM and Mopar vehicles. They allow you to correctly lower the front end of your car in conjunction with lowering springs and shocks. These replacements are for use on cars with factory disc brakes—or can be used to convert cars that originally came with drum brakes in the front. Order the pair recommended for your application.
( 3 )
$180.99
—
$508.99
OER coil spring spacers are quality reproductions to fit your classic. They're manufactured from durable EPDM rubber and were originally used by GM on the assembly line to raise the front height on Camaros. The spacers fit between the lower control arm and the spring. Order the model designed for your vehicle application.
( 19 )
$17.99
OER rear leaf spring U-bolts are necessary components when changing from a mono-leaf to a multi-leaf setup. These U-bolts are offered in the OE width for original leaf springs, and in a replacement style for reproduction leaf spring plates.
( 23 )
$24.99
—
$25.79
OER engine mount bushing and stud kits are designed for fitment on all 1955-57 Chevrolet cars with either a 6-cylinder or V8 engine. These replacement kits include the bushings, stud, washers and nuts. One engine mount kit mounts the motor on one side; two kits are required per car to complete the installation. Features and benefits of OER engine mount bushing and stud kits include: * Designed with the latest software and manufactured with modern tooling * Connects engine mounts to frame adapters * Heavy-duty rubber bushings absorb vibrations * Exact reproduction to OE specifications * Bolt-on design for simple installation
( 2 )
$36.79
OER Authorized reproduction front and rear cab mount bushings are available for 1988-98 Chevy and GMC standard cab C/K GMT400 Series pickup truck models. Each bushing is manufactured to correct factory specs, offering an authentic replacement that will install as original. The 16-piece sets include upper and lower bushings, bolts, spacers, and washers.
Not Yet Reviewed
$158.99
Install your rear multi-leaf springs with one of these OER 1967-79 rear multi-leaf spring installation kits. They include rear shackle kits, upper and lower spring mounting pads, spring front eyebolts and nuts, front spring eye bracket bolts and clip nuts, T-bolts, and U-bolts designed for multi-leaf springs.
( 10 )
$139.99
OER control arm bolts are available to secure both your upper A-arms and lower control arms. The original equipment reproductions feature high-strength Grade 8 steel construction, which is formed and thread rolled to exact OE specs. Bolt heads have the correct markings and are finished with a black oxide coating. The upper A-arm bolts include zinc coated nuts, and the lower control arm bolts are sold individually. This is direct replacement hardware for many vehicles from the 1960s and '70s.
( 15 )
$9.99
—
$22.79
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
