Availability
OER offers replacement power steering control valves for classic cars and trucks equipped with original power-assist power steering. These OE reproductions are also machined from cast iron—and feature the correct threaded ports for pressure and return lines. Each control valve includes the pivot ball and stud, the pivot ball dust boot with retainer, and grease fitting. Order the model recommended for your application.
( 8 )
$167.99
OER engine mounting brackets are accurate reproductions of the factory originals. They are correct in appearance and are manufactured from stamped steel in OE thicknesses. OER engine mounting brackets provide the proper fit and look on a variety of applications.
( 77 )
$36.99
OER rear multi-leaf spring installation kits have everything you need to mount your rear leaf springs. Most kits include a rear shackle kit, upper and lower spring mounting pads, spring eyebolts and nuts, spring eye bracket bolts and clip nuts, U-bolts, and T-bolts.
( 50 )
$139.99
OER rear leaf springs are quality reproductions of the original designed to exact specifications to ensure the correct fit, form, and function. These leaf springs are available in applications to fit different make and model vehicles.
( 52 )
$459.99
—
$557.99
OER Original Equipment Reproduction manufactures authentic products for the restoration industry, and their line of Authorized control arms meet or exceed stringent OER quality control standards, ensuring the best quality and fit for your classic vehicle. OER Authorized 1971-87 Chevy/GMC truck lower control arms come with rubber bushings, cross shafts, and ball joints pre-installed. They are manufactured from steel and powdercoated black for a stock appearance. Restore your classic's suspension with OER Authorized control arms.
( 1 )
$540.99
OER steering column bearings can eliminate vibration and rotating resistance. Designed to offer support to the steering shaft, these bearings press into the bottom of the steering column tube; then the shaft runs through it. Order the factory recommended replacement to fit your application.
( 9 )
$66.99
Install your rear multi-leaf springs with one of these OER 1967-79 rear multi-leaf spring installation kits. They include rear shackle kits, upper and lower spring mounting pads, spring front eyebolts and nuts, front spring eye bracket bolts and clip nuts, T-bolts, and U-bolts designed for multi-leaf springs.
( 9 )
$139.99
These OER reproduction body mount bushings are designed to replace original, worn-out subframe body mounts on your classic car. Replacing the original bushings with these durable rubber reproductions is a sure way to retain originality and mount the body exactly the way the factory intended. Each bushing is designed and manufactured to replicate the original in every detail, and each mount is produced using correct, compression-molded S.B.R. with steel inserts where required.
( 7 )
$9.99
—
$177.99
OER leaf spring mounting brackets are designed to securely mount your factory or aftermarket leaf springs. They're manufactured from stamped steel and bolt into the stock location. The replacement brackets are available for either mono or multi-leaf style rear leaf springs. Order the model recommended for your vehicle application.
( 34 )
$33.99
—
$34.79
OER steering couplers are designed to replace damaged, bent, or worn-out OEM rag joint couplers. They feature steel construction and stock mounting positions for an easy installation. Available for many vehicle applications, OER steering couplers provide steering performance that you can count on.
( 55 )
$33.79
—
$40.79
OER rear leaf spring U-bolts are necessary components when changing from a mono-leaf to a multi-leaf setup. These U-bolts are offered in the OE width for original leaf springs, and in a replacement style for reproduction leaf spring plates.
( 22 )
$24.99
—
$25.79
OER coil spring spacers are quality reproductions to fit your classic. They're manufactured from durable EPDM rubber and were originally used by GM on the assembly line to raise the front height on Camaros. The spacers fit between the lower control arm and the spring. Order the model designed for your vehicle application.
( 19 )
$17.99
OER leaf spring shackle sets are top-quality reproductions of the factory original shackles. Each set includes bushings, plates, bolts, and nuts for multi-leaf or mono-leaf springs.
( 13 )
$50.79
OER control arm bolts are available to secure both your upper A-arms and lower control arms. The original equipment reproductions feature high-strength Grade 8 steel construction, which is formed and thread rolled to exact OE specs. Bolt heads have the correct markings and are finished with a black oxide coating. The upper A-arm bolts include zinc coated nuts, and the lower control arm bolts are sold individually. This is direct replacement hardware for many vehicles from the 1960s and '70s.
( 15 )
$22.79
Extend your shocks with OER rear leaf spring shock extenders! OER manufactures these high-quality extenders that not only work, but look great, too! They're designed for use when converting mono-leaf springs to multi-leaf springs. OER rear leaf spring shock extenders allow you to reuse your mono-leaf shocks.
( 48 )
$24.79
—
$28.79
Metal-on-metal is rarely a good thing, when you're talking automotive parts. Why not slide OER coil spring insulators between your springs and frame for improved performance that's nice and quiet, too. Although they were not original on all vehicles, these rubber OE reproductions will offer a direct-fit replacement for any application with the proper dimensions. Pad your coil springs to perform—and sound—better with insulators from OER.
( 6 )
$17.99
These OER 1967-79 rear mono-leaf spring installation kits are designed to mount your rear leaf springs. They include rear shackle kits, upper and lower spring pads, spring front eyebolts and nuts, front spring eyebolts and clip nuts, and T-bolts used for mono-leaf spring kits.
( 6 )
$139.99
These OER rear spring front bracket bolts are designed to mount the leaf spring front eye bracket to the body of your vehicle. They are manufactured from durable steel and the washer is built onto the head of the bolts.
( 8 )
$4.99
New control arm bushings are a must when doing a front suspension rebuild. OER quality control arm bushings are available for a variety of upper and lower applications. These premium bushings are manufactured to original factory specifications to provide an accurate fit, finish, and function, which in turn provide improved handling. OER control arm bushings are correct replacements that will add new life to your vehicle's suspension. Keep a good handle on things with OER control arm bushings.
( 3 )
$18.99
—
$23.99
OER F-body sway bar bracket and leaf spring anchor bolts are used to attach the rear sway bar bracket to the lower anchor plate and leaf spring perch. These T-bolt fasteners were originally used on models with the heavy-duty F41 suspension option—and can be shortened to the required length for use on vehicles without F41 suspensions. The bolts are case-hardened for maximum durability.
( 7 )
$9.99
—
$10.99
Maintain proper suspension travel and protect costly suspension components with OER control arm bumpers. These upper and lower control arm bumpers from OER are manufactured to original factory specifications to provide accurate fit, finish, and function. By replacing your control arm bumpers, you can help to increase your vehicle's handling and the longevity of the shocks and springs, which are vital parts of your vehicle's suspension package. Improve your ride today with OER control arm bumpers!
( 62 )
$12.99
—
$18.99
Equip your classic muscle car with new upper and lower leaf spring pads from OER. These original-quality reproductions are specifically manufactured to fit 1967-81 Camaro and Firebird models. Each pad is used to insulate the area between the rear leaf spring and the axle tube mounting plate. These sets include the two upper pads and two lower pads required per vehicle. (If you're converting a 1967-69 single to a multi-leaf application, it will be necessary to install the multi-leaf spring pads.)
( 3 )
$53.96
OER center drag links are accurate reproductions of the factory original links. They are made to meet or exceed OE standards to ensure proper operation. OER center drag links come ready to install, right out of the box!
( 25 )
$74.99
OER rear axle rubber bumpers are reproductions of the original frame bump stops which attach to the body and help keep the rear axle from bottoming out. They're manufactured using hard rubber material with molded in stud for mounting. Order the axle bumpers recommended for your application.
( 4 )
$25.99
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
