Availability
OEM Automotive Tools bench grinder stands feature multiple mounting configurations to fit many bench grinders, pipe benders, vises, and drill presses. The heavy-duty steel construction is designed with a large base (pre-drilled for mounting) to prevent walking or wobbling during operation. Additional details for OEM Automotive Tools bench grinder stands: * Top/Plate dimensions: 13.8 in. (L) x 9.8 in. (W) x 0.2 in. (H) * Overall dimensions: 13.8 in. (L) x 9.8 in. (W) x 37.4 in. (H) * Mounting hardware is not included
( 5 )
$158.99
OEM Automotive Tools 3-point engine support bars keep your engine level when changing out motor mounts, transmissions, transaxles, or anything underneath your front-wheel drive vehicle. They provide 3-point support for off-center loads with an adjustable transverse bar and 2 adjustable hook screws. OEM engine support bars include two braided steel cables.
( 3 )
$160.99
The OEM Tools 5-Ton bar-type puller/bearing separator sets can be used separately or with other pullers or tools for a wide variety of pulling jobs. When using these bar-type puller and bearing separator tool sets, the first step is to pull bearings off shafts and then separate the bearing housings safely and without hassle. These tools feature a drop-forged heated-treated steel construction and includes 2 in. and 3 in. bearing splitters, four sets of hex push-puller legs, and a bar-type puller head with 9/16 in. forcing screw.
( 2 )
$139.99
OEM Automotive Tools 9-gallon upright portable oil drains are an efficient way to evacuate used oil from a vehicle. Simply position the 17 in. diameter funnel below the oil drain plug, adjust the drain height, and release the waste oil into the draIn channel. The 9-gallon tank features translucent green plastic, so the user can monitor waste oil levels. This oil drain is also equipped with an evacuation spout and drain valve for easy waste oil disposal when the tank is full. The included tool holder offers a convenient place to store tools while working.
( 2 )
$145.99
OEM Automotive Tools pneumatic/manual fluid extractors let you use shop air or the hand pump to extract low viscosity fluids through dipstick tubes or other openings with minimal clean-up. These extractors can remove many automotive fluid types, including engine oil, transmission fluid, gear oil, coolant, power steering fluid, and more. They also feature an automatic shut-off valve to prevent messy overflows. Features include: * One-piece, leak-proof reservoir * Use with any low-viscosity fluid, including water * Automatic shut-off valve prevents overflow * Oversized pumping handle for easy use * Working pressure of 85 psi and a maximum pressure of 120 psi * 41 in. extended dipstick hose adapters for a longer reach and broader applications * Capacity of 1.5 gallons
( 2 )
$118.99
—
$150.00
Designed for ease of use and versatility, the OEM Automotive Tools 18-gallon upright portable oil drains are designed to provide a more efficient way to evacuate used oil from a vehicle. Simply position the funnel below the oil drain plug, adjust the drain height, and then release the waste oil into the drain. The tanks are made from durable plastic material and are translucent green in color, so that the user can easily monitor waste oil levels. These units are equipped with an evacuation spout and drain valve for easy waste oil disposal when the upright portable tank is full. Additional features include: * Four heavy-duty casters for easy transport * Adjustable drain height: 54 in. up to 70 in. * Funnel diameter: 18 in. * Includes tool holder
Not Yet Reviewed
$210.58
OEM Automotive Tools underhoist tripod jack stands provide added support during the positioning and installation or removal of vehicle components. While unable to fully support or stabilize a vehicle, these high-reach stands are designed for use with a vehicle properly positioned on an automotive lift.
( 4 )
$243.95
OEM Automotive Tools ATF manual fluid filler systems are complete kits for servicing today's sealed automatic transmissions, and may also be used for brake fluid refills or any pressurized fill job. These service kits allow the operator to fill or top-off the transmission with up to 3.1 qts. of fluid between refills, while the pressurized operation frees the operator from continual pumping. Service your sealed automatic transmission like a pro by using OEM Automotive Tools ATF manual fluid filler systems. Features and kit components include: * Reservoir capacity 3 liters (3.1 quarts) * Includes adapters to fit many Ford, BMW, Honda, Nissan and VW, Porsche, Mini Cooper, Audi, and Mercedes-Benz transmissions * Fluid dispensing hose feature a swivel connector and fluid dispensing shut-off valve * Includes belt attachment for storing all the adapters on dispenser * Adapters Included: DSG M24 x 1.5 in., CVT M22 x 1.5 in., CVT M12 x 1.5 in. , ATF M10 x 1.0 in., ATF 1/8 NPT-27, ATF 04, ATF 03 and ATF 02
Not Yet Reviewed
$122.99
OEM Automotive Tools engine supports will provide unparalleled adaptability with threaded adjustable chain hooks and telescoping side foot pads that adjust to any engine compartment size. They precisely position your motor while you work on it or the transmission. With 1,100 lbs. of holding capacity, OEM Automotive Tools engine supports are ideal for both 4- and 6-cylinder engines. More product features include: * Threaded chain hook adjusts to fit most automobiles * Straddles inner fender wells to support the engine * Holds securely and prevents damage with rubber foot pads * Telescoping side foot pads
( 1 )
$178.64
OEM Automotive Tools high-reach jack stands provide added support during the positioning and installation or removal of vehicle components. While unable to fully support or stabilize a vehicle, these high-reach stands are designed for use with a vehicle properly positioned on an automotive lift.
( 1 )
$249.95
OEM Automotive Tools Professional 6-wheel creepers have a concave design that allows you to roll under your vehicle comfortably. Their solvent-resistant construction ensures long life and the ergonomic concave design with comfortable headrest and four trays for quick tool and part storage, make them the ideal choice for your shop. Foam shoulder pad and headrest provide additional comfort, while a slot in the creeper base offers a place for easy carrying and hanging when not in use.
( 2 )
$156.99
Now it's easy to monitor your radiator for proper pressure. OEM Automotive Tools offers complete radiator and cap test kits with all the components needed to check radiator caps and cooling systems for leaks. These kits are suitable for a large variety of domestic and import vehicles. Features and benefits of OEM radiator and cap test kits include: * Chrome plated pressure pump for corrosion resistance * Includes three popular radiator adapters and one cap adapter * Cap has a rotating lever for fine pressure adjustment and safe pressure release * Comes in a sturdy blow-molded plastic storage case
( 5 )
$162.95
Stop wasting time and energy hammering away at seized U-joints. OEM Automotive Tools U-joint pullers safely and easily remove seized U-joints. These innovative tools can be used with an impact wrench to quickly disassemble drive lines without damaging the driveshaft, yokes, joints, or bearing cups. Models are offered to work on most Class 7 and 8 trucks, most passenger vehicles and light-duty trucks, and intermediate trucks, buses, and light industrial/farm equipment. Choose the proper OEM Tools U-joint puller for your project and safely disassemble drivelines without hammering or heating components. Model's bearing cup outside diameters: * Automotive: 1 in. to 1.25 in. and can be used with a 1/2 in. drive or smaller impact wrench * Intermediate: 1.25 in. to 1.7 in. and can be used with a 1/2 in. drive or smaller impact wrench * Heavy-duty: 1.5 in. to 2.2 in. and can be used with a 1 in. drive or smaller impact wrench
( 2 )
$109.99
—
$124.99
The OEM Automotive Tools 23-piece FWD bearing removal kit facilitates the installation or removal of wheel bearings with the steering knuckle and strut assembly still on the vehicle. This typically eliminates the need for an alignment. The tools and accessories are packaged in a storage case, and they will work on both domestic and import front wheel drive vehicles.
Not Yet Reviewed
$236.99
Your teenager just had his second fender-bender... and this time he's gonna attempt some bodywork, at your "encouragement." Hook him up with OEM Automotive Tools dent puller sets! These drop-forged steel kits include everything from hammers and hooks to claws and chains. Hey, the pros use 'em... why not Junior?
( 2 )
$152.27
OEM Automotive Tools jack stands are designed to increase your productivity while maintaining safety. The self-locking ratcheting design allows quick and safe adjustments to the height of each stand. For jobs small and large, they're an essential addition to any home garage or small shop. Additional details: * Large welded foot pads provide extra stability and help prevent sinking into asphalt and similar surfaces * Durable steel construction * Recessed saddle for a secure placement * Self-locking ratchet allows safe and easy adjustment * Meets ANSI 2014 standards
( 11 )
$200.95
OEM Automotive Tools relay circuit testers include five popular relay leads and one universal lead. They are made of superior-quality materials to ensure long-lasting durability and performance and come in a blow-molded case to keep them from getting damaged while not in use. If you're in need of a high-quality set of relay circuit testers, OEM Automotive Tools has you covered.
Not Yet Reviewed
$199.00
OEM Automotive Tools brass manifold gauge kits are complete diagnostic and service gauge sets for use on R134a automotive A/C systems. These kits include large easy-to-read gauges, 60 in. hoses, high-quality snap style fittings, and twist valves to help you to get the job done. The gauges also feature a convenient hook for hanging for use when working, or for easy storage. If you're looking for a more efficient way to service your automotive R134a automotive air condition system, OEM Automotive Tools brass manifold gauge kits are just what you need! Key features and components of brass manifold gauge kits include: * High-quality brass body with sight glass * Large, easy-to-grip chrome plated handles * Two easy-to-calibrate 2 1/2 in. gauges with high-impact Lexan glass * Rubber gauge covers for added protection * Heavy-duty hook for hanging the gauges * 60 in. 3,000 psi burst and 600 psi working pressure hoses * Snap-style quick couplers
( 3 )
$122.99
OEM Automotive Tools crank bolt sockets are perfect for breaking loose a stubborn crank bolt! Constructed from durable chrome molybdenum steel, these heavy-duty impact sockets are designed with more mass for high-torque applications. Removing crank bolts can be tiresome work with a standard socket—so use the right tool for the job the first time from OEM Automotive Tools!
( 1 )
$129.99
OEM Automotive tools slide hammers are designed to work with OEM and other manufacturers' attachments with the same thread. These slide hammers come in a sturdy molded case with room to store other attachments.
( 7 )
$108.99
Versatile and tough enough for both professionals and do-it-yourselfers, OEM Automotive Tools parts washers are constructed of heavy-duty 20-gauge steel—and powdercoated for rust resistance. They feature fully adjustable flexible nozzles, component shelves, easy-to-maintain solvent pumps that flow up to 325 gph, and reliable 120 V motors. OEM Automotive Tools parts washers are available in small, medium, and large capacity sizes to accommodate any parts you need to clean.
( 4 )
$211.99
—
$253.99
OEM Tools engine levelers are designed to be used as an aid in the removal and installation of automotive and light truck engines, transmissions and assemblies. These load leveling devices are for use with a suitable shop crane or hoist to move the load to its balance point while being supported by a crane or hoist. The engine levelers feature a 4-point mounting system to provide maximum control and provide 3-chain positions to accommodate many different engine configurations. Additional features and benefits: * Durable steel construction * Smooth operating worm drive shaft for easy level adjustment
Not Yet Reviewed
$143.99
OEM Automotive Tools manual fluid extractors have hand-operated pumps to tackle big jobs and can be used to extract most fluid types: engine oil, transmission fluid, gear oil, coolant, and power steering fluid. They are available with different reservoir capacities that also include 5 ft. of flexible hose and two dipstick hose/adapters. Choose your preferred extractor from OEM Tools. Features and benefits: * One-piece reservoir structure with leak-proof bottom * Suitable for low-viscosity fluid, including water and coolant * Overflow shutoff valve prevents fluid from overflowing * Oversized pumping handle for easy use * Updated 41 in. extended dipstick hose adapters for a longer reach and broader applications
Not Yet Reviewed
$104.98
OEM Tools fuel pump replacement tool kits are used for replacing the fuel pump in many Ford, GM, and Chrysler fuel tanks. They include a soft-faced hammer for striking retainer rings, etc., without causing a spark, and a non-ferrous punch for removing fuel pump retainer rings. Features: * For fuel pumps located in the fuel tank of the vehicle * Includes fuel line disconnects for Chrysler, Ford, and GM * Comes in a sturdy blow-mold storage case
Not Yet Reviewed
$154.99
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
