Nitrous Outlet Bottles, Kits & Parts

Nitrous Outlet Swivel Manifolds

Nitrous Outlet swivel manifolds are designed to connect a nitrous gauge, fuel pressure gauge, or any two 1/8 in. NPT accessories in-line. These black anodized aluminum swivel manifolds allow you to easily install them onto fittings without having to spin the whole manifold. They are available with adaptors for -4 AN or -6 AN lines and include one 1/8 in. NPT hex plug. Get connected and stay connected with swivel manifolds from Nitrous Outlet.

4.0 out of 5 stars ( 8 )

$14.99

—

$20.99

Nitrous Outlet Fuel Pressure Safety Switches

Nitrous Outlet fuel pressure safety switches are necessary safety devices that can save your nitrous-boosted engine in the event of fuel pump failure. These switches are designed to work in-line with -6AN fuel supply hoses and promptly shut off your nitrous system when the fuel pressure drops below your preset calibration. Specifically engineered to withstand the rigorous demands of running nitrous, the switches are available for high- or low-pressure setups (carbureted, dedicated fuel, or fuel injected systems). Order the Nitrous Outlet fuel pressure safety switch recommended for your specific application. Features: * 1/8 NPT inlet on -6 AN manifold * All switches fully adjustable by set screw at end of pressure switch * Low-pressure switches shipped preset at 5 psi (adjustable range from 1.5 to 20.0 psi) * High-pressure switches shipped preset at 35 psi (adjustable range from 20 to 120 psi)

5.0 out of 5 stars ( 3 )

$76.99

—

$87.99

Nitrous Outlet Luminescent Fuel Pressure Gauges

Nitrous Outlet luminescent fuel pressure gauges deliver shining performance in a robust metal frame. These bright glow-in-the-dark analog gauges feature a radiant white face (with obvious dial indicators) that is easily visible day or night, making it much easier for you to monitor. They're available in a choice of psi ranges and with or without a manifold. Fuel pressure is an essential part of the proper function of your nitrous system. Keep an eye on it easier in any lighting conditions with Nitrous Outlet luminescent fuel pressure gauges.

5.0 out of 5 stars ( 5 )

$26.99

—

$34.99

Nitrous Outlet Luminescent Nitrous Pressure Gauges

Nitrous Outlet luminescent nitrous pressure gauges deliver glowing performance. Maintaining your system's bottle pressure is vital for the proper function of its system and the components. These bright, glow-in-the-dark analog gauges feature a radiant white face that is easily visible day or night, so you can always keep an eye on the bottle pressure. They feature heavy-duty stainless construction, measure up to 1,500 psi, and have color-coded indicators that easily decipher if your system is at the proper pressure. Choose your application (some include a manifold for inline connection) and make your race nights brighter with Nitrous Outlet luminescent nitrous pressure gauges.

3.43 out of 5 stars ( 7 )

$24.99

—

$32.99

Nitrous Outlet ProMax Dual-Channel Progressive Controllers

Nitrous Outlet ProMax Dual-Channel Progressive Controllers incorporate the system activation and safety functions of the WinMax—but adds numerous tuning and traction features that help you get the most out of your nitrous system. With the ProMax you can set rpm, time-based, or boost referencing progressive ramps for multiple stages while integrating wideband inputs. Additional features and benefits include: * Inputs for vehicle speed, trans-brake, MAP sensor, two wideband oxygen sensors, two nitrous pressure sensors, and one fuel pressure sensor * Two built-in 70 amp solenoid drivers can control two stages independently, or can be configured for closed-loop fuel control based on wideband oxygen input—with nitrous on one output and fuel on the second output * Progressive stage controls allow: adjustable frequency output of 10-30 Hz (by 1 Hz) for driving solenoids * Ability to be configured to vary solenoid duty cycle as a function of time, throttle percent (TPS), engine rpm, vehicle speed, manifold pressure (MAP) * Ability to set response of stage based on secondary arm switch input (arm/disarm) * Resume and restart feature option for controller—to resume an interrupted time-based ramp or start over based on TPS going out of range * Built-in rpm window switch with gear lockout feature * TPS or WOT switch activation * Data logging capable * Updateable Firmware * CAN Bus output * Two ignition retard outputs * Simple USB connection to PC/laptop * Optional 4.3 in. full touch screen display allows viewing of real-time data * Saved data logs can only be viewed on PC/laptop * Can save up to five different tuneups * Controller can be programmed via PC/laptop or optional display

Not Yet Reviewed

$600.99

—

$1,393.99

Nitrous Outlet Stinger Plate Nitrous Oxide Systems

Nitrous Outlet Stinger Plate nitrous oxide systems feature a second generation Stinger plate designed to work with either 4150 or 4500 flanged carbureted-style intake manifolds. The new billet aluminum Stinger plate has a larger conical cone than the previous version and is based off of the same technology as the Nitrous Outlet Nitrous Puck, enabling them to delivering up to 600 hp with proper jetting. The plate features 15 discharge ports for nitrous and 15 discharge ports for fuel. The 15 atomized plumes of nitrous and fuel exit from the center of the stinger into the intake plenum in a 360 degree pattern, completely saturating the air intake charge as it enters the intake plenum for even distribution. Nitrous Outlet Stinger Plate nitrous oxide systems include nitrous and fuel solenoids, solenoid brackets, a main feed line, relay, harness, jetting, hardware, and wiring.

Not Yet Reviewed

$1,294.99

—

$1,655.99

Nitrous Outlet Deep Break Center Solenoid Mounting Brackets

Nitrous Outlet Deep Break center solenoid mounting brackets are specifically designed for carbureted or carbureted-style EFI intakes with a 4500 flange. The solenoids mount in the front and rear center of the intake, slightly lower than the flange. They are built strong enough to withstand engine vibration to keep your solenoids securely in place and are good for use with tall intake manifolds, or for hanging the solenoids upside-down.

Not Yet Reviewed

$65.99

—

$79.99

Nitrous Outlet 4500 GENIII Dual-Stage Hornet Plate Systems

What's the buzz word in motorsports? It's nitrous! So, if you like to go fast—get on board with Nitrous Outlet 4500 GENIII Dual-Stage Hornet plate systems! The CNC-machined billet aluminum Hornet plates are equipped with a unique, large, cone shaped "stinger" that protrudes from the bottom portion of the plate into the center of the intake throat. Each stinger has 16 discharge ports, 8 for nitrous and 8 for fuel. The 16 atomized plumes of nitrous and fuel exit from the center of the stinger into the intake plenum in a 360 degree pattern, completely saturating the air intake charge as it enters the intake plenum for even distribution and precise atomization. GENIII dual-stage systems include Y-fittings to connect both stages and jetting for horsepower settings from 100 to up to 800 hp (depending on kit), as well as the nitrous and fuel solenoids capable of flowing up to 800+ hp. Nitrous Outlet offers these nitrous systems with or without nitrous bottles/brackets. Features include: * Revolutionary GENIII design * Dual-entry * Extended reach cone * Fits single-plane 4500 flange intake manifolds—carbureted or EFI * 360 degree discharge pattern * Unmatched atomization precision * Anodized billet aluminum plate * Hard lines, bracket, gasket, jetting, hardware, and electrical included * E85 compatible (with different jetting) * Nitrous bottle size options available Notes: * Gen III Hornet plates are a directional plate design and must be installed with the fuel solenoid towards the front and the nitrous solenoid to back of the vehicle. Failure to do so will result in poor nitrous/fuel distribution and could result in engine damage. * Check clearance for distributor and throttle cable linkage.

Not Yet Reviewed

$2,078.99

—

$2,263.99

Nitrous Outlet Nozzle Adapter Fittings

Nitrous Outlet nozzle adapter fittings feature a 2-piece locking design to prevent the nozzle from working loose and allowing the nozzle adapter to fall into the intake manifold or tube. Precision-made, they are available to fit either 1/16 in. NPT or 1/8 in. NPT nozzles and will work with any brand of nitrous nozzle. The fittings are black anodized aluminum for less weight and long-lasting good looks.

Not Yet Reviewed

$7.99

—

$11.99

Nitrous Outlet 4150 GENIII Hornet Dual-Stage Nitrous Oxide Plate Systems

Nitrous Outlet 4150 GENIII Hornet dual-stage nitrous oxide plate systems are the big buzz in performance! The CNC-machined billet aluminum Hornet plates have the largest "stingers" with 16 discharge ports—8 for nitrous and 8 for fuel—that will extend deep inside your intake's throat, spraying a 360 degree pattern. This will completely saturate the air intake charge for precise atomization. GENIII dual-stage systems come with Y-fittings to connect both stages and jetting for horsepower settings from 100 to 700 hp, as well as two nitrous and two fuel solenoids capable of flowing up to 800+ hp. The systems also include anodized aluminum "Boomerang" brackets and pre-bent hard lines for a clean professional look that matches their performance. Inject your vehicle with a Nitrous Outlet 4150 GENIII Hornet dual-stage nitrous oxide plate system. Features include: * Revolutionary GENIII design * Dual-entry * Extended reach cone * Fits single-plane 4150 flange intake manifolds—carbureted or EFI * 360 degree discharge pattern * Unmatched atomization precision * Anodized billet aluminum plate * Hard lines, bracket, gasket, jetting, hardware, and electrical included * E85 compatible (with different jetting) * Jetting included for 100 to 700 hp Notes: * Gen III Hornet plates are a directional plate design and must be installed with the fuel solenoid towards the front and the nitrous solenoid to back of the vehicle. Failure to do so will result in poor nitrous/fuel distribution and could result in engine damage. * Check clearance for distributor and throttle cable linkage.

Not Yet Reviewed

$2,169.99

—

$2,275.99

Nitrous Outlet 4500 Stinger Plate Conversion Kits

Nitrous Outlet 4500 Stinger plate conversion kits bring you a new 2nd generation Stinger plate that's capable of delivering up to 600 hp! They feature a large, unique, cone shaped "stinger" that protrudes from the bottom portion of the plate into the center of the intake throat. Each Stinger has 15 discharge ports for nitrous and 15 for fuel. The 15 atomized plumes of nitrous and fuel exit from the center of the stinger into the intake plenum in a 360 degree pattern, completely saturating the air intake charge as it enters the intake plenum for even distribution. Their Stinger plates are CNC-machined from 6061 billet aluminum, they have a black anodized body and a red anodized stinger, and are CNC-engraved with the Nitrous Outlet logo. Nitrous Outlet 4500 Stinger plate conversion kits include the 2nd generation 4500 Stinger plate only. Nitrous Outlet 4500 Stinger plate conversion kits are designed to fit any carbureted or EFI single-plane 4500 flange intake manifold.

Not Yet Reviewed

$976.99

Nitrous Outlet Annular Nozzle Bungs

Nitrous Outlet annular nozzle bungs are designed to be welded into your intake manifold to install nitrous nozzles. They are machined from 6061 aluminum and pre-tapped on one end with 1/16 in. NPT threads. Your intake must be machined to accept Nitrous Outlet annular nozzle bungs.

Not Yet Reviewed

$10.99

Nitrous Outlet 4150 Dual Entry Hornet Plate Conversions

Nitrous Outlet 4150 dual entry Hornet plate conversions flow up to 700 hp without modification. They come out of the box with everything you need to replace your current plate. Designed for 4150 flange carbureted-style intake manifolds (carbureted or EFI), the new Hornets are based on the same technology as the Stinger. Hornets have a larger conical cone and they're dual entry (two inlets for nitrous and fuel). This allows you to spray either a huge shot of nitrous or go with two stages. The Hornet's large and unique cone-shaped "stinger" protrudes from the bottom portion of the plate into the center of the intake throat. Each Hornet has 15 discharge ports for nitrous and 15 discharge ports for fuel. The 15 atomized plumes of nitrous and fuel exit from the center of the stinger into the intake plenum in a 360 degree pattern. This completely saturates the air intake charge as it enters the intake plenum for even distribution. Sting the competition with a Nitrous Outlet 4150 dual entry Hornet plate conversion! Features and items: * Capable of spraying 800 hp with two 0.187 fuel solenoids and 0.122 nitrous solenoids * Capable of spraying up to 880 hp with a 0.178 nitrous solenoid and a 0.310 fuel solenoid * Gasket, jetting (from 100 to 700 hp), and hardware * Unmatched precision atomization * CNC-machined black anodized 6061 billet aluminum plate * Red anodized stinger is CNC-engraved with Nitrous Outlet logo and fuel/nitrous ports * E85-compatible with different jetting

Not Yet Reviewed

$454.99

Nitrous Outlet FAST Intake Dual Mount Solenoid Brackets

Nitrous Outlet FAST intake dual mount solenoid brackets are custom-made to place the solenoids to the right and left side of the throttle body, putting them in the most ideal location in the engine compartment. This design makes your nitrous install clean, easy, and professional. They are built strong enough to withstand engine vibration to keep your solenoids securely in place and are specifically designed for the FAST 102mm intake manifold running a dual stage system, providing you with the highest level of performance possible.

Not Yet Reviewed

$69.99

Nitrous Outlet Vehicle-Specific Solenoid Mounting Brackets

Nitrous Outlet vehicle-specific solenoid mounting brackets are custom-made to place the solenoid in the right location in your engine compartment—for a clean, easy, and professional nitrous install. They're built strong enough to withstand engine vibration to keep your solenoids securely in place, while giving your system a custom-anodized, show-quality finish. The brackets are available in a variety of styles.

Not Yet Reviewed

$40.99

—

$94.99

Nitrous Outlet 4500 Flange Center Rear Solenoid Mounting Brackets

Nitrous Outlet 4500 flange center rear solenoid mounting brackets are specifically designed for carbureted or carbureted-style EFI intakes with a 4500 flange. They hold your solenoid in the rear center of the intake, keeping the solenoids out of the way of fuel logs or anything else that may be on the front side of the intake. Nitrous Outlet 4500 flange center rear solenoid mounting brackets are built strong enough to withstand engine vibration to keep your solenoids securely in place. They place your solenoid slightly lower than the intake inlet and are good for use with Nitrous Outlet dry puck, dry spraybar, and dry single nozzle systems.

Not Yet Reviewed

$56.99

Nitrous Outlet Offset Solenoid Mounting Brackets

Nitrous Outlet offset solenoid mounting brackets are specifically designed for carbureted or carbureted-style EFI intakes with a 4500 flange. Two solenoids mount in the front and rear of the intake offset on either side. They are built strong enough to withstand engine vibration to keep your solenoids securely in place, while giving your system a custom-anodized, show-quality finish. Nitrous Outlet offset solenoid mounting brackets are designed to place the solenoids slightly lower than the intake inlet and are good for use with the Nitrous Outlet Puck, spraybar, and single-nozzle systems.

5.0 out of 5 stars ( 2 )

$62.99

—

$72.99

Nitrous Outlet Universal Solenoid Mounting Brackets

Nitrous Outlet universal solenoid mounting brackets are designed to work with any make, model, or year vehicle and any solenoid. They are constructed from zinc plated steel to prevent rust, and four solenoid mounting screws are included.

1.5 out of 5 stars ( 2 )

$12.99

—

$67.99

Nitrous Outlet Solenoid Center-Rear Mounting Brackets

Nitrous Outlet solenoid center-rear mounting brackets are specifically designed for carbureted or carbureted-style EFI intakes with a 4150 flange. These brackets hold two fuel and two nitrous solenoids in the rear center of the intake, keeping the solenoids out of the way of fuel logs or anything else that may be on the front side of the intake. Nitrous Outlet solenoid center-rear mounting brackets are designed to place the solenoids slightly lower than the intake inlet, and are good for use with the Nitrous Outlet dual stage systems and dual nozzle systems.

5.0 out of 5 stars ( 1 )

$60.99

—

$61.99

Nitrous Outlet FAST Intake Solenoid Brackets

Nitrous Outlet FAST intake solenoid brackets are custom-made to fit the best mounting location in your engine compartment—for an easy and professional installation. Built from water-cut anodized aluminum to withstand engine vibration, the brackets hold your solenoids securely in place, while giving the system a custom finish. All hardware is included.

Not Yet Reviewed

$37.99

—

$85.99

Nitrous Outlet Vehicle Specific All-In-One Solenoid Mounting Brackets

Nitrous Outlet vehicle-specific all-in-one solenoid mounting brackets conventionally hold both your nitrous and fuel solenoids and mount directly to your passenger side head. They're built strong enough to withstand engine vibration in order to keep your solenoids securely in place. Order the bracket recommended for your application.

Not Yet Reviewed

$50.99

—

$81.99

Nitrous Outlet Holley Hi-Ram All-in-One Solenoid Mounting Brackets

Nitrous Outlet Holley Hi-Ram all-in-one solenoid mounting brackets are designed to mount directly to your Holley Hi-Ram. These brackets are built strong enough to withstand engine vibration to keep your solenoids securely in place, while giving your system a custom finish. Nitrous Outlet Holley Hi-Ram all-in-one solenoid mounting brackets are capable of mounting both solenoids to the front or back of your intake, giving you the choice you want.

Not Yet Reviewed

$52.99

Nitrous Outlet Solenoid Mounting Brackets

Nitrous Outlet solenoid mounting brackets can attach to any side of the intake to clear almost anything. They're specifically designed for carbureted or carbureted-style EFI intakes with a 4150 flange. The brackets are built strong enough to withstand engine vibration, keeping your solenoids securely in place—while giving your system a custom, water-cut anodized aluminum show-quality finish.

2.5 out of 5 stars ( 2 )

$55.99

—

$71.99

Nitrous Outlet 4500 GENIII Stinger Nitrous Oxide Plate Systems

Nitrous Outlet 4500 GENIII Stinger nitrous oxide plate systems come out of the box with everything you need to spray up to 500 hp! Nitrous Outlet is proud to introduce their 3rd generation Stinger plate systems. They feature a revolutionary extended-reach cone that sits further down inside the intake plane to prevent nitrous from hitting the sidewalls on intakes with a high plane or spacer plate. Each stinger has 15 discharge ports for nitrous and 15 discharge ports for fuel. The 15 atomized plumes of nitrous and fuel exit from the center of the stinger into the intake plenum in a 360 degree pattern, completely saturating the air intake charge as it enters the intake plenum for even distribution. Nitrous Outlet 4150 GENIII Stinger nitrous oxide plate systems include everything you need to spray 50 to 500 hp. Overview: * Max-flow 500 hp anodized billet aluminum stinger plate * Single-entry * 4500 flange * 360 degree discharge pattern * Gasket, jetting, and hardware included * E85 compatible with different jetting

Not Yet Reviewed

$1,496.99

—

$1,781.99

Nitrous Outlet Bottles, Nitrous Kits and Parts